Roll-off container

CONTAINER SCARRABILE NUOVO A CIELO APERTO HARDOX

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Place: Germany Fgjdpfeltinwex Addjk Available immediately

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Fodjxddaaspfx Addjgk

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Fgsdpfjw U Stqex Addjk Severance capacity: 50 mm - 125 mm/min Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Workpiece lead with clamp, Operating manual Option: Hypertherm cartridge reader, software

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: GM 3941/02, In total there are 3 x Grob BZ500 available (Please state your offer price) Sale only within Europe, incl. Turkey Price without packing; delivery condition: FCA (machine location) ===== Technical data see handout. Any warranty right is excluded. For the correctness of technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the adherence to all safety as well as environmental protection requirements specified in the accident prevention regulations, we do not take over guarantee. No sale to private persons. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Fsdpfx Asmk Utroddsgk

Condition: reconditioned (used), Year of construction: 2005, Coupling containers, 30–32 m³, suitable for screw compactors, available for right or left configuration. Used, fully functional coupling containers from €4,000, depending on condition, excluding VAT. Delivery possible. Fjdpsgypd Hsfx Addogk

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 Fgsdpfen I Twyjx Addjk - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t Fodocxxrpspfx Addsgk stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: good (used), Technical condition: good Visual appearance: good Price: On request Please contact Ferdinand Pater for more information Fgsdst Dlurepfx Addok

Condition: used, Year of construction: 2015, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 12 Year of construction: 2015 Briquette diameter: 125 mm Fgjdpfsq D Acpjx Addok Press cylinder force: 4,200 KN Capacity: Steel, cast iron: 2600-2900 kg/h Aluminum: 1000-1200 Kg/h Brass: 3200 kg/h Drive power: 3 x 37 kW Installation area: 9 x 6.5 x 2.5 m Machine weight: 24 tons

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, pressing force: 25 t, filling opening width: 800 mm, filling opening length: 1,050 mm, bale width: 900 mm, bale height: 800 mm, input voltage: 400 V, noise level: 85 dB, power: 18.5 kW (25.15 HP), volume flow: 160 m³/h, Bollegraaf HBK25 offered in Cyprus. The machine is in good condition and includes a floor conveyor belt. The machine is immediately available. Technical specifications of the baler: Drive: 18.5 kW Bale size: 800 x 900 x adjustable Feed hopper dimensions: 1,050 x 800 Press force: 25 tons Fedpsxbdgujfx Addegk Capacity: 160 m3/hour (depending on material) Technical specifications of the conveyor belt (approximate): Length on floor: 3,000 mm Diagonal length: 5,000 mm