CNC Press brake HAP 2050 x 100 to
HAP 100 20/17

Year of construction

2025

Condition

New

Location

Türkei

CNC Press brake HAP 2050 x 100 to HAP 100 20/17

Show map

Machine data

Machine type:: CNC Press brake HAP 2050 x 100 to

Model:: HAP 100 20/17

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Türkei

Call

Details about the offer

Listing ID:: A5795517

Update:: 02.01.2025

Description

Delivery ex works Turkey

Bending length (A): 2050 mm
Press force: 100 tons
Sheet thickness 42kgf / mm: 8 mm
Sheet thickness 72kgf / mm: 4 mm
Upper tool: 1260 Top Tool 85 °
Lower tool: 50, 35, 22, 16
Distance between columns (B): 1700 mm
Forward speed: 130 mm / s
Working speed: 8 mm / s
Retraction speed: 120 mm / s
Crowning: manual (CNC-motorized available for an extra charge)
X-axis travel: 750 mm
X-axis speed: 250 mm / s
Backgauge fingers: 2 pieces
Front support arms: 2 pieces
Oil tank capacity: 120 liters
Main motor power: 7.5 kW
Stroke length (C): 265 mm
Installation height (D): 450 mm
Projection stand (E): 410 mm
Table height (F): 800 mm
Table width (G): 110 mm
Length (L): 2500 mm
Height (H): 2000 mm
Width (W): 1500 mm
Weight: approx. 5300 kg
Cybelec Cybtouch 12 2D Graphic CNC control
3 axes (Y1, Y2, X) expandable with optional R+Z-Axis
Eurostamp 2067 lower tool (V: 50, 35, 22, 16)
Eurostamp 1260 upper tool 85 °
Narrow table
All-steel welded construction
Promecam quick clamping system
CNC-controlled motorized backgauge (X: 750 mm)
Adjustable backgauge fingers
Inch and metric system can be selected
Ground and chrome-plated cylinders
Swiveling control panel
Foot control with anti-panic stop & emergency shutdown
Lateral protective grille (secured with limit switch)
Light curtain on the back of the machine (900 mm)
DSP laser finger protection system at the front (CE)
BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump
Slidable front support arms (2 pieces)
Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON
380 V 50 Hz
Painting: RAL 7035, RAL 5015
Nsdpfegu Nz Sjx Aa Dskt

Optional special accessories available at an additional cost:
-CNC-controlled R-axis (250 mm)
-CNC motorized crowning
-Servo driven motors backgauge system for X + R axis (Mitsubishi)
-Painting in special colors on customer request

Documentation in German or English
CE conformity

Seller

Last online: Yesterday

Registered since: 2014

9 listings online

Call

Send inquiry

Telephone & Fax

+49 2595 ... show

These listings may also fit your interest.

Listing

Folding machine METALLKRAFT MSBM 2520x3.5

Rödermark

6,869 km

Folding machine
METALLKRAFTMSBM 2520x3.5

Call

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW Nksdpfxotpnple Aa Det - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

See details

Listing

Slitting line Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791)

United States

13,592 km

Slitting line
Slitting line SECO60″ x 0.375″ x 50,000Lb (A3791)

Call

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Nkjdpfxstiy Nte Aa Det Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

See details

Listing

Pre shredder Woodshredder Palletbreaker LUMAGO D.S.C. Dutch Shredder Company PYTHON 1300

Goor

7,029 km

Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1300

Call

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes Njdpfx Aaof N Nlvj Djkt • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

See details

Listing

USED CNC-PRESSBRAKE MANUF. TRUMPF, MODEL TRUBEND 3100 TRUMPF TRUBEND 3100

Kopenhagen

6,665 km

USED CNC-PRESSBRAKE MANUF. TRUMPF, MODEL TRUBEND 3100
TRUMPFTRUBEND 3100

Call

Condition: used, Year of construction: 2021, Max. pressure 100 ton Nkjdpoxr U Nhsfx Aa Dot Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

See details

Listing

Hydr. 3-roll sheet round bending machine OMCCA HSI 3000 x 4

Rödermark

6,869 km

Hydr. 3-roll sheet round bending machine
OMCCAHSI 3000 x 4

Call

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t Nkjdjmdqlljpfx Aa Dst - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

See details

Listing

Double column stamping press Edelhoff DARR1/200/830

Ennepetal

6,978 km

Double column stamping press
EdelhoffDARR1/200/830

Call

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: Nkjdpfx Aogpxc Ssa Dst - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

See details

Listing

Bed type milling machine CNC Bettfräsmaschine Universal ZAYER 20 KF 4000

Westerkappeln

6,940 km

Bed type milling machine
CNC Bettfräsmaschine Universal ZAYER20 KF 4000

€55,000

fixed price plus VAT

Call

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Njdjwtpfpepfx Aa Dskt Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

See details

Listing

Cobot Palletizer FJ Mayer HYDRA cobot palletizer

Pottendorf

6,304 km

Cobot Palletizer
FJ MayerHYDRA cobot palletizer

€75,900

fixed price plus VAT

Call

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements Njdpfxsi Emapj Aa Dskt → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

See details

Listing

Nevers

7,297 km

Machining center
EMMEGIPHANTOMATIC T3A

€28,000

fixed price plus VAT

Call

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation Nkjdpfoundg Ujx Aa Dot MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

See details

Listing

3-roll round bending machine Fastech FRS 2050 x 140

Mudersbach

6,933 km

3-roll round bending machine
FastechFRS 2050 x 140

Call

Condition: new, Fastech 3-roll round bending machine FRS 2050 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1530 kg dimension L-W-H 3240 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor Nodpfx Aaehzq D He Dokt sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

See details

Advertise here