Agricultural machine

Kehrmaschine Saphir 181

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Ledpfxowp Rqfj Akfeaa The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Laodpfoi Ezx Djx Akfsa Measuring accuracy WITHOUT DISMANTLING

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Ledpfx Aowcdpnjkfjaa We have several pieces

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Lodpfx Aorxta Eokfeaa

Condition: good (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 5,900 kg, maximum load weight: 2,900 kg, lifting power: 2,900 kg/m, lifting height: 3,285 mm, axle configuration: 4x4, number of seats: 1, emission class: euro3, shovel volume: 1.15 m³, Year of construction: 2014, operating hours: 3,289 h, Equipment: all wheel drive, cabin, head guard, onboard computer, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 3289 h Operating weight: 5,900 kg Max. tipping load: 4,140 kg Bucket capacity: 1.15 m³ Drive: Hydrostatic All-wheel drive: Yes Differential lock: Yes (100% connectable) Quick coupler: Hydraulic Cabin: Closed Cabin heating: Yes Air conditioning: No Tyres: 405/70-24 Pneumatic – approx. 80% remaining Engine manufacturer: Deutz Engine power: 55 kW Emission standard: Stage V Hydraulic flow: 84 l/min CE certified: Yes === HIGHLIGHTS === • Compact and powerful wheel loader • All-wheel steering for excellent manoeuvrability • 100% differential lock • Hydraulic quick coupler system • Strong tipping load of 4,140 kg • Comfortable closed heated cabin Laedpfoym Spvsx Akfsa • Reliable and efficient hydrostatic drive === CONDITION === Machine in very good working condition. Fully inspected and tested. Tyres approximately 80% remaining. Ready for immediate use. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). === DELIVERY === Crane loading available upon request. Flexible international transport solutions tailored to your destination. All logistics professionally arranged by Collé Rental & Sales. Well-maintained Kramer 1150 wheel loader (2014) equipped with a Deutz engine and hydrostatic drive. This compact yet powerful machine offers excellent manoeuvrability thanks to its all-wheel steering and high tipping load capacity. Ideal for construction, industrial and infrastructure applications. CE-certified and ready for immediate deployment.

Condition: used, Year of construction: 2022, Plasma Cutting System Manufacturer: Swift Cut Model: Pro 3000 Ledpfx Aoyazzbjkfsaa Year of manufacture: 2022 X/Y Travel: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminium): 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm ä16426

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm Lodpjmxkggjfx Akfjaa MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Laodpjxnmbnefx Akfea Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filter unit TEKA Ref. ä16426

Condition: used, mileage: 4,84,000 km, power: 353 kW (479.95 HP), first registration: 10/2010, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, trailer coupling, quick-change system. Tipper with 2-side discharge / fifth-wheel coupling with crane / fifth-wheel with crane and platform – a custom-built vehicle for companies requiring versatility. Wohlgenant two-sided tipper with boardmatic. Hiab crane 2011. Lajdpfsx Dzpfex Akfoa Suspension: Leaf-air

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. Lsdpfjxlf Hwox Akfsaa - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg