Kieselguhr filtration plant

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Dkjdszhn Ayopfx Akzjp Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Dedpfx Akewd Talozokp

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump Dkedpfxozd Scpe Akzep

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 05 17 1994, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller model: Heidenhain TNC 415, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Travel range X-axis: 2,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,250 mm B-axis: 360° Table size: 1,600 x 1,800 mm MACHINE DETAILS Control system: Heidenhain TNC 415 Tool holder: SK 50 ATC: 60 Note: Angles are not included in the scope of delivery. Dkedpfx Akjzha Inszep The machine has already been disassembled.

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 Dsdeb U Hwtjpfx Akzskp clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Dkodszdtxfspfx Akzop Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Dodpfx Aezdttpokzjkp Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Condition: good (used), 50-position filler with crown cap closure. Used in a winery for filling wine into 1L glass bottles Dedsvq Suispfx Akzekp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Dksdpfx Ajzd Tcdekzep Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101.116, Year of construction: 2001, operating hours: 2,133 h, load capacity: 9,000 kg, lifting height: 3,000 mm, free lift: 200 mm, load center: 600 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 9,000 kg (up to 10 tons can be lifted temporarily) Lifting height: 3,000 mm Free lift: 200 mm Load center: 600 mm Overall height: 2,480 mm Fork length: 1,650 mm Fork width: 150 mm Fork thickness: 70 mm Turning radius (outer): 2,900 mm MACHINE DETAILS Fuel type: Gas Mast type: Duplex Engine manufacturer: Perkins Transmission type: Hydrostatic Power: 55 kW (74.78 hp) Engine speed: 2,300 rpm Front tire type: Solid rubber tires (non-marking) Rear tire type: Solid rubber tires (non-marking) Hydraulic tank: 120 liters Operating voltage: 12 V Noise level: approx. 85 dB(A) Dimensions & Weight Length (to backrest): 3,050 mm Width: 1,550 mm Wheelbase: 1,950 mm Unladen weight: 14,500 kg Max. travel speed: 10 km/h Gradeability: 15% Operating hours: 2,133 h EQUIPMENT Trailer coupling Lighting Dodpfxjzd Sg Uj Akzskp CE marking Complete documentation including spare parts list Cabin Pallet forks Side shifter UVV (German accident prevention regulations) Hydraulically adjustable cabin Swivel column with telescopic boom Integrated winch AM/FM radio 3 switchable cameras with monitor Digital weighing system Pfreundt WK33 Joystick control Comfort seat Excellent all-around visibility

Condition: good (used), - With 20 plates - With 20 canvases - Machine in perfect condition Dimensions : - Length: 2000 mm Dkjdpfxjv Uw Rqs Akzep - Width: 700 mm - Height: 1500 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91045841, Year of construction: 2007, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, battery voltage: 48 V, TECHNICAL DETAILS Load capacity: 2,000 kg Load center: 600 mm MACHINE DETAILS Mast model: ZG 560DZ Drive type: Electric drive Battery voltage: 48 V Drive power: 6.0 kW Unladen weight without battery: 3,392 kg Battery weight: 890–984 kg EQUIPMENT Driver's seat Dodpfx Akozd Rukozskp Sensitive hydraulics Very maneuverable Ideal for high-bay warehouses Robust Jungheinrich technology Precise control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,976 h, load capacity: 2,700 kg, lifting height: 8,000 mm, mast type: triplex, TECHNICAL DETAILS Lifting height: 8,000 mm Load capacity: 2,700 kg Dkjdjzd Rr Nepfx Akzop Load capacity at 8,000 mm lifting height: 2,200 kg at a 400 mm load center 1,900 kg at a 500 mm load center 1,700 kg at a 600 mm load center MACHINE DETAILS Mast type: Triplex Mast model: TXH8000 Electric drive: 48 V Battery weight: 1,100–1,200 kg Weight without battery: approx. 3,560 kg Operating hours: 4,976 h EQUIPMENT Electric reach truck 4-way system for long loads Comfort seat Joystick control Suitable for high-rack warehouses Toyota quality vehicle Direction of travel: forward / backward / sideways Stand-on forklift Hydraulic fork adjustment 360° steering

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Dodpfoxqz D Aox Akzjkp Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm Dsdpfx Akjzd Rqljzokp MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle