Hall construction

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00316, Year of construction: 2019, operating hours: 6,820 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length including fork carriage: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width for pallet 1,000 x 1,200 mm (crossways): 3,186 mm Aisle width for pallet 800 x 1,200 mm (lengthways): 3,311 mm Turning radius: 1,487 mm Smallest pivot point distance: 1,487 mm Mast height lowered: 2,160 mm Mast height extended: 3,742 mm Height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,820 h EQUIPMENT UVV 04/26 Charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panoramic roof Nwedpfx Aeyiaxzog Noc Digital display Interior rear-view mirror Operating manual Note: The upholstery is worn.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Nwjdpfsw I T E Isx Ag Noc Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Njdpsymmpdofx Ag Nswc Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00299, Year of construction: 2019, operating hours: 6,310 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Nwsdpfoyia Dkex Ag Njc Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Smallest pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,310 h EQUIPMENT UVV 05/26 Charger Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front window with wiper Panoramic roof Digital display Interior mirror Operator’s manual

Condition: used, Year of construction: 1989, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nwsdeinla Tspfx Ag Nec On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511903V00414, Year of construction: 2019, operating hours: 6,292 h, load capacity: 1,700 kg, lifting height: 5,750 mm, free lift: 1,880 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 1,700 kg Load center: 600 mm Load distance: 410 mm Wheelbase: 1,453 mm Free lift: 1,880 mm Lift height: 5,750 mm Fork dimensions: 50 / 100 / 1,150 mm Fork carriage width: 760 mm Fork outside width min./max.: 316 / 620 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,412 x 1,270 x 2,900 mm Weight: 3,470 kg Length incl. back of forks: 1,262 mm Mast height extended: 6,320 mm Overhead guard height: 2,200 mm Nwjdpfx Aeyh Eppog Njc Seat height: 1,140 mm Arm height: 308 mm Battery voltage / capacity: 48 V / 620 Ah Mast type: Duplex (side-shift) Operating hours: approx. 6,292 h EQUIPMENT Charger Blue Spot rear Operating manual UVV: 06/26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Nwjdpfjyh I U Ijx Ag Noc Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering Nodpfsiniz Djx Ag Nowc enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length: 3,150 mm Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Nwsdpfx Asylk E Hsg Nsc Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Control system: SIEMENS 840D Total power requirement: 70.6 kW Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm Nodpfxsylk Eys Ag Njwc MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. Nedpoxp Ibxjfx Ag Nswc We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nwjdsyi Ub Hspfx Ag Nec Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00315, Year of construction: 2019, operating hours: 6,239 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Working aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,239 h EQUIPMENT UVV 04/26 Battery charger Side shifter Nwodpfeyia Hfjx Ag Nsc Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front windscreen with wiper Panorama roof Digital display Interior mirror Operating manual Note: The upholstery is worn.

Condition: new, Year of construction: 2025, container length: 7.2 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 6.6 m³, loading space width: 1,200 mm, loading space length: 2,400 mm, loading space height: 2,500 mm, machine/vehicle number: Sanitärcontainer WC-WC, Equipment: bathroom, shower, Sanitary container | WC container | Shower container | Toilet container | Double WC container | 120cm x 240cm | Model WC-WC | Double WC container | High-quality and flexible solution Available products can be viewed and collected directly from our warehouse. Our office, residential, and sanitary containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, highest flexibility, and short delivery times. Technical details: Dimensions: • Length: 240 cm • Width: 120 cm • Height: 250 cm • Weight: 400 kg Insulation: • Ceiling/wall: 5 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or rock wool available • Floor: 16 mm fiber cement board + RAL 7015 colored, "seamless" epoxy resin floor coating • PVC covering Equipment: • 2 mm thick galvanized steel sheet • RAL 7015 colored, seamless epoxy resin floor coating • 2× rooms • 2× exterior doors • 2× WC with washbasin • 2× ventilation • Frameless, modern mirror • Metal toilet paper holder • Metal soap dispenser Colors: • Facade color: RAL 9002 • Frame color: RAL 7016 Nwodpfx Agovv Ra Ue Noc • Customization: Individual design possible according to customer wishes High-quality workmanship for long-term use Stock & delivery: • Stock items: shipped the same day • Not in stock: production time depending on model 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Individual sizes: products can be manufactured according to the specific requirements of the customer. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For more information or customized adaptations, we are happy to help!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Nodsyk S Uyepfx Ag Njwc Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.