Screw conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Fsdey Hg S Hspfx Aa Negb Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. Fsdpfjq Nf Enox Aa Njgb 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Fgedpfey E Hqtex Aa Njb Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Fgedpfsy Hhqdox Aa Neb Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Condition: good (used), Year of construction: 2000, functionality: fully functional, Holtec Bruks long log intake system with root reducer, consisting of: Cross infeed conveyor with 6 chain strands, split drive. Holtec hydraulic step feeder with split drive. Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. Holtec heavy-duty conveyor belt for round timber. Fgedpfowxck Aex Aa Nob Scraper conveyor for waste removal and distributor auger.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Fgsdpfxoy Eydyj Aa Njb Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Fgjdpoy Exdxefx Aa Neb Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Fgsdpfxsxb S Srj Aa Njb Manufacturer: Steinert Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Fgjdjy Exdlspfx Aa Nob Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) Fodpfx Aey Exc Isa Njgb 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws Fsdelxzl Espfx Aa Nsgb - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Fodpey Exatjfx Aa Negb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Fodpfoy Exagjx Aa Negb TECHNICAL DETAILS Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Fsdpfx Aaowxdimj Nogb Tilting trough for long timber. Spare parts.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived. Fodpfxsy Ew U Ao Aa Negb