Tube straightening and drawing machine

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" Ljdpfjyn Nybsx Abcohd MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW Lhodpfehwwpzex Abcod ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, load capacity: 1,500 kg, fork length: 1,100 mm, overall weight: 3,350 kg, total length: 3,100 mm, total width: 1,000 mm, TECHNICAL DETAILS Lodpfsyt Nl Iox Abcshd Lifting capacity: 1,500 kg Fork length: 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,000 x 2,000 mm Weight: 3,350 kg EQUIPMENT Charger

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit Lsdpfx Aeyt Nlbsbcshd - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: new, Year of construction: 2023, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,050 mm, Technical specifications Cutting capacities: Maximum cutting length: 3100 mm Maximum thickness for mild steel: 10 mm Maximum permissible thickness for stainless steel: 6 mm Overhang: 50 mm Adjustable cutting angle: 1.5 degrees Number of hold-down devices: 16 Hold-down force: 22 tons Adjustable backgauge: up to 1000 mm Ledpjrt Uv Esfx Abcshd Speed of the back gauge: 200 mm per second Drive and dimensions: Motor power: 22 kW Oil tank capacity: 200 liters Support arms: 2 pieces Worktable height: 865 mm Worktable width: 580 mm Worktable length: 3515 mm Machine dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm Weight: 9300 kg Total width incl. support arm and safety guard: 3600 mm Equipment features Design with pendulum cut for precise results Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length and number of pieces, including USB connection Motorized backgauge mounted on ball screws with a reach of up to 1000 mm, can be folded up for maximum flexibility Clear control panel on the swivel arm for convenient control Hydraulic hold-down device for optimized cutting results, positioned close to the cutting edge Foot pedal for easy operation Centrally adjustable cutting gap adjustment for different material thicknesses Cutting line lighting for increased precision Large support table with sliding balls for material handling Counter for number of cuts Options for single and series cutting Folding finger guard and side stops for safe working Easily replaceable and resharpenable blades for long-lasting sharpness Adjustable cutting length for efficient processing and minimum material consumption Low-maintenance design with easily accessible oil filling Safety light barriers at the rear of the machine for increased occupational safety Professional customer service Operating instructions in GERMAN and ENGLISH Complies with the current CE safety regulations

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, AFC-746 F, six parallel cross folds + cross knife + 2 parallel cross folds TECHNICAL DETAILS Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Pile height: 1,200 mm Paper weight: 35 to 209 g/m² MACHINE DETAILS Power supply: Three-phase, 400 V Lhjdpfoyrnz Ejx Abcod Current: 12.6 A Connected load: 5.3 kW Counter reading: approx. 50 million sheets Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel 6 folding pockets First knife fold and 2 pockets under the knife Second knife

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Lodpfx Abjyrmzqscohd Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D08L/8034, Offer Number: D08L/8034 Machinetype: straightening and cutting machine Make: WAFIOS Type: R31 Constr. year: 2000 wire diameter range: 1,5-7,0mm cutting length: 3000 mm speed - meters/min: 5-120 Location: In our warehouse Lhsdswi Th Tspfx Abcsd

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! Lodpeyrf Ensfx Abcehd TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Hainbuch collet chucks left and right Chip conveyor Manuals Note: The bar feeder is not included in the offer.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Lsdpfxeyrfvgo Abcehd Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: used, Rounding machine tool WemaProbst RHM 200 Lhodpfxjv Ii Tko Abcjd

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: €143,250! Production printer with the following configuration: Ledsyrd Rcspfx Abcjhd - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 ppm Printing speed A3: up to 171 ppm Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 gsm – 300 gsm Plain paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions: Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Lhsdpfx Abeyub R Eeced Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m Lodpfjwu Hg Hex Abcshd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Lhsdpfx Abjypdw Dscsd Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F