Thread ring gauges

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! Lodpfx Akjz I Tt Ijmehn The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2004, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE MAX ROTATING DIAMETER: 730 mm MAX TURNING LENGTH: 1750 mm MAX TURNING DIAMETER: 528 mm BAR CAPACITY: 110 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA A2-11 ; 530 mm X-AXIS TRAVEL: 156 + 251 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 12 - 15 m/min DRIVEN TURRET HEAD: 12 (6 DRIVEN TOOLS) POS; 2500 rpm; 5,2 kW HIGH PRESSURE COOLANT: 4 BAR Lhsdsxymcvjpfx Akmon CONTROL UNIT: FANUC 0i-TB WEIGHT: 13500 Kg OVERALL DIMENSIONS: 6210 x 2980 x 2515 mm ACCESSORIES: SWARF CONVEYOR

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm Lhedpfx Akjz I S Uwemon MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Lhjdpfx Aj Ad Rdiskmsn If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Year of construction: 1989, condition: ready for operation (used), A Maho CNC 4-axis universal bed-type milling machine is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle mount: SK50, main spindle speed: 4000rpm, power: 22kW. Tool positions: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16000kg, control: Philips CNC 232. An on-site inspection is possible. Lhodpfx Akov Ubqnemjn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Battery voltage: 48 V Battery capacity: 20 Ah MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT Lhsds Ad N S Ejpfx Akmjn 2 lithium-ion batteries Charger Battery connector Wall plug Lot number 3632 Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 1,952 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Type: P50 Year of manufacture: 2019 Drive: Electric Ledpfe Ad N Slsx Akmshn Operating hours: 1,952 h PERFORMANCE Towing capacity: up to 5,000 kg BATTERY Battery date: 06/03/2019 (?) Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V INSPECTIONS AND SERVICE Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 800 mm Height: 1,400 mm Own weight: 1,000 kg Lot number: 453 Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Capacity: 620 x 460 mm Double mitre Lodey Rktiopfx Akmshn Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Lhjdj Ad N Igjpfx Akmsn Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg Lhsdpfs Ad N H Asx Akmsn EQUIPMENT Battery charger Functional and condition video available Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Lhodpswziflefx Akmjn Maximum pressure: 16 bar, Power supply: 230 Volt

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Lhedpfo Ad N E Esx Akmjn Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Pallet capacity: 2 pallets simultaneously Battery Battery year of manufacture: Week 44/2023 Lhedpfs Ad N Elex Akmon Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,215 h, functionality: fully functional, machine/vehicle number: 11170003783, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain iTNC 530, workpiece weight (max.): 800 kg, spindle speed (max.): 16,000 rpm, coolant supply: 20 bar, spindle nose: HSK-63, number of spindles: 1, number of slots in tool magazine: 60, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Rotary table diameter: 900 x 630 mm Coolant flushing system Electronic handwheel Coolant gun QuickSet cycle 3D measuring probe, Heidenhain Operating mode 4 Air cooling via spindle Internal coolant supply via spindle Ljdpfxszabqco Akmjhn Operating hours: 63,490 hours Programming hours: 28,215 hours Without clamping devices Without tools The machine is fully functional and still in operation. An inspection under power can be arranged upon request.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Lhjdpfx Ao Ad N D Uskmsn Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.