Heavy welding and clamping table

Condition: new, Year of construction: 2024, Protec welding rotary table 20000 Kg load capacity speed infinitely variable 0,05 - 0,35 rpm Hand remote control foot remote control extra charge 390.-€ height 700mm Gusdpfx Asid Szkoh Dek diameter 2000mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Godet Dmmvepfx Ah Dsuk Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: Gujdpfx Ajd Hmnfoh Dsk After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left Godpfx Ahochhfuo Deuk cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Godpfxotr Azko Ah Douk Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis Guodpfx Ajrz Nfloh Dek - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust Gedpshua Dqefx Ah Dsuk

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Godjw T Sc Nepfx Ah Dsuk Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : Gsdovf Nw Depfx Ah Dsuk RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: good (used), Year of construction: 1999, Center height 550 mm Turning diameter over bed 1100 mm Turning diameter over support 830 mm Center distance 2000 mm Spindle bore 95 mm Spindle mount DIN 55027 size 11 Bed width 700 mm 21 speed settings 8 – 800 rpm Workpiece weight between centers 6000 kg Workpiece weight between centers and 1 steady rest 7600 kg Workpiece weight in 3-jaw chuck 1000 kg Feed range longitudinal 0.010 – 12.8 mm/rev transverse 0.05 – 6.4 mm/rev Rapid traverse Z/X 4/2 m/min 60 metric threads 1 – 120 mm 56 inch threads 30 – 1/4" 45 module threads 30 – 0.25 module Tailstock mount MT 6 Gedpfx Ahsv Rvztj Deuk Quill travel 300 mm Quill diameter 130 mm Drive power 27/17 kW Dimensions L x W x H 4500 x 1750 x 1700 mm Weight 7800 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw BISON face-to-face scroll chuck, Ø 630 mm • 1 stationary steady rest with rollers up to Ø 750 mm • Automatic top support feed • "Multifix" quick-change system, size D2 • Main drive 27/17 kW • Tailstock quill with reduction gear for quill adjustment 1:1 + 1:5 • Large, movable chuck guard • Leadscrew and feed screw guards • Machine light • Feed + rapid traverse in all axes • Coolant system • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel