Stylus grinding machine

MABA FSS

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time. Ledstqdqgjpfx Akmsru

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Ledsyq Hq Nepfx Akmoru Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min Lrsdpfxjwwwr Eo Akmju total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Lrsdpjviuzcefx Akmeu

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Lsdpjnccx Hofx Akmjru

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Lrjdpfeyxnyisx Akmou

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) Lodpfxjxaa S Ds Akmsru - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. Lodpey Naacofx Akmeru • Operating hours: 12,567 h • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, controller manufacturer: FANUC, controller model: Series 16i-MB, number of axes: 4, This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Lrodpfx Asx D Rxiokmeu Machine Benefits Qualitative Machine Benefits • Machine in good condition, regularly maintained. Technical Machine Benefits • 4th axis: yukiwa • Table size: 750 x 380 mm • Spindle power 11 kW (1min rating) / 3.7 kW (continous) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, controller model: na, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 2000. It features a table surface of 900x350 mm, a spindle speed of 8000 rpm, and a spindle motor power of 7.5 kW. Equipped with a conversational HAAS CNC, electronic handwheel, and a chip conveyor screw type, this vertical machining centre is ideal for detailed and precise machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table surface: 900x350 mm • Table weight: 340 kg • Electronic handwheel • 3-color status light • Chip conveyor: screw type • Programmable coolant nozzle Lrodpfx Akjyaitfsmsu • 4th axis: 360000° Extra Information Full Documentation