Used Wiese Ds3-24Pt-S Ask for sale (68,713)

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container ----Technical Specifications * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles Hfsdpfx Asy Euffjf Eeh * Tyres: 235/75 R17.5, twin tyres * Air suspension: fitted * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ----Chassis / Superstructure * Platform trailer with twistlocks for containers * Multiple container locking systems (fixed + extendable) * 6 pairs of lashing points integrated into the outer frame * Additional lashing points under crossmembers * Robust outer frame with lashing holes * 27 mm anti-slip birch plywood floor * Galvanised omega-profile crossmembers * Max. crossmember spacing: 400 mm ----Brakes / Safety * EBS braking system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring system * 2 air tanks (each approx. 80 L) ----Equipment * Complete LED lighting system * Lateral LED marker lights (flashing) * 15-pin electrics * Rear underrun protection * Side underrun protection * Plastic mudguards (180°) * Mud flaps with “WIESE” logo * Rear access ladder (foldable & extendable) * Rear impact buffers ----Towing Equipment * 18 t drawbar (fixed & extendable) * 40 mm towing eye * Turntable with ball bearing slewing ring * Height adjustment available ----Miscellaneous * TÜV approval available * Fully hot-dip galvanised chassis * High-quality steel construction * Made in Germany For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 28,750 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2019, Equipment: ABS, Wiese Low Loader SA 3-36 CS-S Flatbed & Sliding Curtain * Third axle with forced steering * DHOLLANDIA DHLSU.90 tail lift, 9,000 kg capacity * Tail lift operation by foot and hand controls * Maximum internal height rear section: 3,070 mm * Maximum internal height front section: 2,720 mm * Hydraulic rear supports, left and right * Front loading area is 380 mm higher than rear Hodpfsyqiy Hex Af Ejfh * L/W rear section: 9,450 mm x 2,480 mm * L/W front section: 3,610 mm x 2,480 mm * SAF axles * Drum brakes * Winch with cable and remote control * Edscha sliding roof * 25 pairs of small lashing rings, 3 pairs large lashing rings * Lifting roof Interim sale and errors explicitly reserved! Sale exclusively according to our Terms and Conditions Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these may result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all details are provided without guarantee and do not constitute a legal claim. Legal Notice: This sales listing does not represent an offer in the sense of §145 BGB. Rather, the information serves as a basis for contract initiation. All technical details provided are without guarantee and do not constitute warranted characteristics.

Condition: used, maximum load weight: 19,510 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2014, total width: 2,550 mm, total height: 4,000 mm, Wiese Low Loader SA31CS - S Wabco * Force-steered 2nd axle * Two-piece rear ramps, extendable version (electrically/hydraulically) * Central section hydraulically adjustable (form-fit for driving onto gooseneck) * Maximum internal height 3480 mm with lowered central section * Maximum internal height rear section: 3110 mm * Maximum internal height front section: 2630 mm * Reversing camera * SAF axles * Drum brakes Hfedox Tx U Tspfx Af Eoh * Winch * Edscha roof * Rear support * Sliding tarp on both sides * 14 pairs of small and 3 pairs of large lashing rings Sale and errors excepted! Information provided without guarantee!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, brand-new Wiese Wingliner semi-trailer in OpenTop design * SAF axles with air suspension and disc brakes * Tires: 6-ply 385/65 R22.5" * Wabco brake system * LED lighting * Titgemeyer outer frame, with 12 pairs of lashing brackets embedded in the outer frame * 1x spare wheel holder * 2x stainless steel toolbox, approx. 1,000x500x500mm * Wingliner OpenTop body * Side wall on the left and the roof can be opened completely for loading. * Drive via electro-hydraulic unit. * Radio remote control * etc... The vehicle is also available for hire!!! Hfjdpsuqgugjfx Af Eeh For further information we are at your disposal

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension * SAF axles * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. Hfedpowtaz Isfx Af Eoh WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Hfedpjd Tpadsfx Af Eoh Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Year of construction: 2024, condition: as good as new (ex-display), Bending power 2200 KN Bending length 3050 mm Passage between d. stands (mm) 2600 mm Stroke length (mm) 265 mm Extension 410 mm Installation height 530 mm Operating speed Y (mm/sec) 10 mm/sec Engine power 18.5 KW Operating speed X (mm/sec) 500 mm/sec Operating distance R (motorized) 350 mm Hfjdpjd R Elcsfx Af Eoh Length 4250 mm Width 1700 mm Height 2750 mm H7s8pkvti Weight 11500 kg Standard: Y1, Y2, pressure bars - axes (individually controllable) X-, R - axes CNC controlled. Control Unit - ModEva 19T Servo motor rear stop & linearly guided ball circulation spindle system (X-R) (AL) CNC-controlled bombing European tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional: Bending - upper tool H=66.5 ( one of them in division ) Bending - Subtool 4V The ( one of them in division ) D-Bend 3D CAD/CAM Import & Simulation Program The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Vsiqjq Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Year of construction: 2024, operating hours: 32 h, condition: new, Make: DURMA Type: AD-S 30175 Hodpfx Afjdx Nluo Eefh Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length X ton) 3050mm x 175t Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Selected options Hodsttatbspfx Af Eofh -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Hfodpfxet Dvl Us Af Eeh Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08

Year of construction: 2024, operating hours: 33 h, condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hsdpfx Afodx Nm Te Eofh Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. Hfodpfx Aorx Rkuof Esh For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

Year of construction: 2024, condition: new, Bending performance 2200 KN Bending length 3050 mm Continuity betw. d. stands (mm) 2600 mm Stroke length (mm) 265 mm Throat depth 410 mm Height 530 mm Operating speed (mm/sec) Y 10 mm / sec Motor power 18.5 KW Operating speed (mm/sec) X 500 mm / sec Operating distance R (motor operated) 350 mm length 4250 mm Width 1700 mm 2750 mm Weight 11500 kg Standard equipment: Y1, Y2, pressure beam - axes (individually controllable) X, R - axes CNC controlled. Control unit - CNC ModEva 15t Servomotor back gauge & linear ball circulation spindle system with Rails (x-R) (AL) CNC controlled crowning European tool clamping system Mobile support arms (with T-slot and stopper) Specially designed hydraulic block and valves for worldwide standard electrical equipment according to global standard Special Accessories: Control DELEM DA-66T (2D graphic, 3D visualization) Bend - 66.5 (one) = upper tool H thereof in pitch bend - lower 4V that (one of them in Division) D-bend 3D CAD /. Hsdpod Afxkofx Af Esfh

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Hsdpfefifg Hox Af Eefh Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Hfsdpfxed Srk So Af Eeh Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. Hjdpfx Afsdx Rd No Esfh We will be happy to send you further information on request.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 112813 € 2132.17 € 320 to 3050 mm Y1 / Y2 / X Achse 365 mm 2600 mm 450 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 154 mm 250 l 37 kW 4300 mm 1820 mm 3330 mm 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size Hfjdewirbfopfx Af Ejh - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: used, empty load weight: 7,330 kg, maximum load weight: 28,670 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 10/2014, next inspection (TÜV): 06/2027, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: black, Year of construction: 2014, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41263 Wiese, Roll-off Tipper * Year of manufacture: 2014 * ABS, Anti-lock Braking System * Air suspension * Trailing/steerable rear axle * 15-pin connection plug * Storage box/toolbox * Inspections: MOT / Emissions test valid until 06.2027 * Suspension: Air * Gross vehicle weight: 36,000 kg * Unladen weight: 7,330 kg * Payload: 28,670 kg * Permissible gross vehicle weight: 36,000 kg * Tire condition 1st axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 50% - 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 40% - 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * VDL S30 - 6400 * Lifting and trailing axle * Hydraulic container locking * Cable remote control defective * Operation via manual control * Accepts roll-off container 5500 - 7000 mm * On request, we can send you a video and more images Disclaimer: Hfedsy U Dwcopfx Af Eoh Subject to changes, prior sale, and errors excepted. You can find more photos and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: new, overall weight: 31,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 7,100 mm, Year of construction: 2026, Equipment: ABS, Technical Information: Weights • Perm. gross vehicle weight: 31,000 kg • Perm. axle load: 20,000 kg (technical 20,000 kg) • Fifth wheel load: 11,000 kg • Unladen weight approx.: 6,800 kg (+/- 5% according to DIN 70020) (depending on equipment) Dimensions • Saddle height approx.: 1,150 mm • Overall width approx.: 2,500 mm • Overall length approx.: 7,100 mm Hsdpfxewxi Ihe Af Eofh • Roller height (device) approx.: 1,500 mm • Our vehicles are designed and manufactured to meet the highest demands in transport, waste management/landfill, and agricultural applications. • Thanks to many years of experience, we guarantee you a robust vehicle with long service life. Steel Frame • Frame construction in welded steel design, made of longitudinal and cross members using high-quality steel with mounting brackets for the installation of the hooklift system • 2'' kingpin, bolted and replaceable, 2 positions Axles/Suspension • Low-maintenance SAF axles, 2 x 10,000 kg, disc brakes • Incl. air suspension with lifting and lowering device • Axle spacing: 1820 mm Lift Axle • 1st axle as lift axle with dual-side lift Braking System • Load-dependent dual-line air brake system in accordance with directive EC 71/320 (WABCO), automatic load-sensing brake regulator • EBS electronic braking system • Smart Board • Parking brake as spring-loaded type • Automatic lowering during hydraulic operation • Supply via Duomatic coupling Tyres • 4 x 425/65 R 22.5 tyres mounted on 10-hole steel rims, offset 120 Support Legs • 10 t gearbox support winches with single-side operation, variable speeds Body • Hooklift system, telescopic design • Hook height: 1,570 mm • Roller height approx.: 1,500 mm • Container external length approx.: 5,000 mm – 7,000 mm • Lifting/tilting capacity: 25,000 kg • Tipping angle: 50 degrees • Data and dimensions according to DIN 30722 • Working pressure: max. 350 bar

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: type plate available, Ystral C 22.000 S Conti-TDS-3 inline disperser, designed for ATEX category Ex II 2D/-c T135°C X (indoor/outdoor), stainless steel control panel, 22 kW, nominal speed 3000 rpm, adjustable speed 600 - 3600 rpm, fitted with a freewheel clutch to interrupt the drive in the event of overload (prevents damage to the machine if foreign objects enter), liquid inlet and outlet DN 65 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, drainage outlet DN 25 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, 2 powder inlets; powder inlet 1 DN 40 milk coupling (DIN 11851) fitted with a butterfly valve and Camlock connection, powder inlet 2 DN 32 clamp connection fitted with a butterfly valve and Camlock connection, powder inlet 2 in a special version for the installation of replaceable Teflon inserts for the processing of highly sticky powders, product contact parts made of AISI 316L stainless steel (1.4404), double mechanical seal with WE100 flow monitoring system, cooling and lubrication of the mechanical seals using clean, filtered tap water, assembled on a mobile stainless steel machine frame, stainless steel cover over the motor, used for the dust-free feeding, wetting and direct dispersion of powders (pigments) in liquids Hfedpfxoy Uvlls Af Eeh

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 3050 mm distance between columns 2600 mm stroke of upper beam 265 mm throat 450 mm dayligth 530 mm working feed 10,0 mm/sec ajustment speed 160 mm/sec return speed 100 mm/sec Control CYBELEC ModEva 10S work height max. 900 mm table width 104 mm back stop - adjustable 800 mm oil volume 250 l total power requirement 18,5 kW weight 10900 kg range L-W-H 4250 x 1700 x 2850 mm from a maintenance workshop - good condition (!!) New price ~ 84.000 euros Furnishing: - with DELEM numerical CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - pivoting control, front right - controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA) - CNC electric backgauge (X axis) * Travel speed 500 mm/sec. - CNC electric height adjustment (R axis) * Travel speed 350 mm/sec. * Travel range 250 mm - 4x manually adjustable stop fingers - Back gauge with ball screw + linear guides - WILA CNC motorized table crowning - FIESSLER laser safety device at the front - Upper tool holder, with crowned upper wedge & quick-change adapter (Amada) - WILA matrix shoe - manual clamping - 2x front - movable - robust support arms * Mounted on a linear guide rail system - side protection - rear protection Hsdpfx Aoyyqkgjf Eofh - Stress-relieved steel construction body = durable monobloc frame - free-moving footswitch - User manual + CE safety standards

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. Hedpfx Afexuhf Ie Eofh ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Condition: new, Year of construction: 2025, neu 2025 080112 prompt, Zwischenverkauf v Türkei 86376 € 1438.29 € 1 76100 € 175 to 3050 mm Hodpewiranofx Af Ejfh Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 10WEEKS): Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, Hsdpfx Ajyi Ezkjf Esfh - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, maximum load weight: 7,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 12/2021, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 3,100 mm, total width: 2,550 mm, Equipment: ABS, Wiese tandem sliding curtain side trailer • Type: TA 10 SP • Rear portal doors • Internal dimensions: 7.10 x 2.48 x 3.10 m • Height-adjustable drawbar • Hydraulic lifting roof • Rear support • Single tires, tire size: 235/75 R 17.5 Hedpey Ei Riofx Af Ejfh • Drum brakes For further information, we are at your disposal.