Used Affeldt Sa 05 for sale (8,541)

Condition: used, maximum load weight: 30,570 kg, overall weight: 38,000 kg, first registration: 10/2008, Internal vehicle number: VTC30056 Gbjdpfx Aezfuq Esatst Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 32,000 kg, overall weight: 38,000 kg, first registration: 09/2006, Internal vehicle number: VTC30058 Gjdpfx Aaszfuqxetobt Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, KUKA KCP2 Standard / VKCP2 ED 05 with 10 m cable Article No.: 00130547 / 00110185 / 00107264 Professionally serviced and fully function-tested KUKA KCP2 teach pendant for KUKA KR C2 robot controllers. The unit undergoes a complete functional inspection and testing of all relevant operating elements and functions. Any identified defective or worn components are professionally repaired or replaced as required. The teach pendant is tested before delivery to ensure full functionality and reliable operation. Technical information: Manufacturer: KUKA Gsdpfx Aezyy Ixoatebt Type: KCP2 Standard / VKCP2 Edition: ED 05 Cable length: 10 m Article No.: 00130547 / 00110185 / 00107264 Condition: Professionally serviced / refurbished Functionality: Fully function tested Warranty: 12 months. The KCP2 is ready for installation and use as a replacement teach pendant for compatible KUKA KR C2 robot systems.

Condition: used, Year of construction: 1987, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, We offer this used HELLER BEA 05 horizontal machining center, year of construction 1987. Type: BEA 05 Serial number: 40311 Year of manufacture: 1987 Phase: 3~ Voltage: 380 V Frequency: 50 Hz Nominal current: 79 A Circuit diagram number: 5151 Manufacturer: HELLER Model: BEA 05 Year of manufacture: 1987 Control: uni-Pro NC80-C Technical Specifications Vertical CNC Machining Center CNC control: uni-Pro NC80-C Vertical spindle SK50 spindle taper Rotary CNC table (4th axis) Automatic tool changer Machine weight: approx. 7,000 kg Installed power: 50 kW Power supply: 380 V / 50 Hz Air supply: 6 bar Floor space required: approx. 4.0 × 4.2 × 3.1 m The machine is working and used condition. Gbedpfx Ajzivzyoatet If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Gbjdpfx Aajzytmzjtet Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg Gbedpfxozq Tzaj Aatot * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, workpiece weight (max.): 50 kg, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. Gbsdpfx Aajzzwx Dstot This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, inner dimension length: 9,300 mm, inner dimension width: 220 mm, inner dimension height: 220 mm, overall weight: 11,000 kg, control type: NC control, fuel type: electric, Equipment: CE marking, documentation/manual, in zeer goede staat hoogfrequent vacuüm droger Gbodpfoy Dr N Sjx Aatet capaciteit 12,5 tot 13 m3 vermogen HF output 50 kw bij een input van 70 Eva door te drogen onder vacuüm verlaagt het kookpunt van water vanaf 60 graden wat sneller drogen op lagere temperaturen mogelijk maakt

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100km/h, Lowered chassis, Sliding tarpaulin Equipment: - 8 lashing eyes - Edge for ramps - Welded frame Net price: €7,096.65 / Gross price: €8,445.01 Article number: AZH235402022.34 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Tented trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 405 x 200 x 220 cm • External dimensions (L x W x H): 561 x 206 x 304 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,500 kg • Tare weight: 858 kg • Payload: 2,642 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side panels with robustly installed locks • Aluminum side panels anodized double-walled • All side panels foldable and removable • Steel corner posts removable • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front wall extensions • Stable cam locks • Steel frame with tarpaulin made of plastic • Roof frame as a gable roof • Crossbars made of wood • Color: anthracite similar to RAL 7016 • Spring latch & swivel locks • Sliding tarpaulin on the left side in the direction of travel • Lateral loading width: 220 cm • Central interior height: approx. 230 cm • Screen-printed wooden floor, continuous without a joint, non-slip and waterproof • Reinforced, stable screwed V-drawbar Gjdpfxjzu N Rle Aatebt • Very stable steel frame welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts welded in continuously • All cross and longitudinal members rest on the ground • 8 lashing brackets recessed inside in the side edge (1000 DaN/kg) TÜV certified! • U-profile on the rear for easier placement of the ramps • Cargo net hooks on hinge lower parts • Parabolic axle from KNOTT • Shock absorbers for 100km/h mounted • Parabolic axle for absolute driving comfort! • Reverse automatic • KNOTT inertia coupling and parking brake • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special wishes! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and pictures are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Year of construction: 2006, Like new, barely used. Gbedpfxozyln Ds Aatet

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Godpoxx Tigefx Aatobt Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks Gbedpfxjwb A His Aatst The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), 4 speeds ranging from 3000 to 10,000 rpm. Engine power: 4 kW. Table dimensions: 950 x 370 cm. Tilting spindle. CE marking. Year of manufacture: 2015. Gedpfjzzpchox Aatebt

Condition: used, Year of construction: 1970, operating hours: 7,253 h, power: 31 kW (42.15 HP), next inspection (TÜV): 05/2028, Renault R 56 tractor with Fritzmeier canopy and windshield. MWM engine – Mannheim Diesel. Rear hydraulic lift and plow attachment, 6-speed gearbox, toolbox, small front weight, trailer hitch, PTO, sprung seat, differential lock, etc. Gedey Uqc Eopfx Aatjbt =====German registration + vehicle registration document + good tires + original paint=====Detailed view of the vehicle // Detailed walkaround of the car: ?v=DCCwBYSrcYQ ==Daily purchase of commercial vehicles, as well as trade-ins possible==

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. Gsdpfx Aaezzkrwetobt This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich construction, rear doors, side door Features: - Rear supports - Lashing rails - 25mm insulated wall Net price: €5,168.07 / Gross price: €6,150.00 Article number: BTS113301618.34 Gbodpfjzy Drzox Aatet Technical data: • Brand: Blyss • Model: FS1330/180HL • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 305 x 159 x 180 cm • Exterior dimensions (L x W x H): 475 x 211 x 237 cm • Loading height of the floor: 52 cm • Permissible total weight: 1,300 kg • Unladen weight: 503 kg • Payload: 797 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, stable, bolted V-drawbar • Hot-dip galvanized frame • Floor panel made of multiplex • Body made of 25 mm sandwich panel, insulated, smooth surface • 2-leaf rear door with rotating bar locking mechanism, lockable • 2x maneuvering handles at the front • 6 lashing eyes recessed in the floor inside • Lashing rail mounted on both sides inside, h= xx cm • Forced ventilation on the side walls: 2x interior fans • Maintenance-free rubber spring axles from KNOTT • Wheel shock absorbers incl. 100 km/h approval • Side door on the front right, lockable from the inside and outside • 2x supports at the rear for safe loading even when not hitched • Reverse automatic • KNOTT overrun device and parking brake • Steel fenders • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery possible throughout Germany - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys Gbjdevpaubspfx Aatet 1 x OMG stacker delivery

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Gjdpfx Aaszuzy Eetebt

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2021, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ Gbjdpfx Aajzuhrbjtet Exceptionally clean vehicle! * Load compartment length: 11,516 mm * Height: 3900 mm * Width: 2550 mm * Permissible total weight: 36,000 kg * Unladen weight: 7640 kg * SAF axles with disc brakes * 385/65 R22.5 tires * ABS * Aluminum rims * Aluminum support legs * Air suspension * Wheel chocks * 1st axle: lift axle * Open side impact protection * Grain chute * A-sign * Plastic toolbox * Platform * Rollover tarp, 680 gr/m² * 5x tarp holders * Multi-chamber lights (standard) * 4x work lights * LED marker lights with flashing function * Acoustic reversing warning We are available for further information.

Year of construction: 2019, condition: new, functionality: fully functional, VALBIA SR 100 S.05 rotary pneumatic actuator with spring return. Gbedpfx Aasztpilstet Manufacturer: VALBIA Type: SR 100 S.05 Product code: 82SR1918 Year of manufacture: 2019 Max. operating pressure: 8 bar Operating temperature: -20°C to +85°C Mounting connection: ISO F07 / F10 ATEX certificate: II 2 G/D c T6 CE marking DN50 Industrial valve with pneumatic rotary actuator 400 EUR per unit. The picture shows two units.

Condition: good (used), Year of construction: 1990, functionality: fully functional, G & H FS 40 SA, Year of manufacture: 1990, Grinding length: 400 mm, Grinding width: 200 mm, Working height: 320 mm, Electric facing device, Cross clamping, Gsdpfxszpwywe Aatsbt Cross stop.

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A Gedpfxjurkyps Aatsbt

Condition: used, functionality: fully functional, machine/vehicle number: 050526, input voltage: 230 V, overall weight: 40 kg, Hello, we are offering a nice, small Roku Print SD 05 for sale. Gbsdpfszll N Sjx Aatst The system is in top condition and has only been used very little for prototype production. This small system features a vacuum printing table. The height of the printing material can be adjusted using the small hand control unit. All the important parameters, such as printing speeds, flood speed, screen clamping, etc., can be easily entered via the hand control unit. In addition, the system is equipped with an adjustable printing table in the x and y directions, which can also be rotated. This is not a standard feature, but rather a special design with table adjustment. The system is a good alternative for those who need to print small parts and for whom Thieme and ATMA screen printing systems are too large. It is an ideal machine for "small parts printing". The machine requires a standard 230-volt connection and compressed air. If you are interested, we would be happy to demonstrate the system. Please feel free to contact us if you have any questions.

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Optional Accessories available Gedpfx Aezwpt Ejatebt

Condition: excellent (used), functionality: fully functional, empty load weight: 6,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, suspension: air, tire size: 385/65 R22,5, color: white, Equipment: ABS, WIELTON NS-3 Standard Dry Freight Box Trailer SAF axles with disc brakes Lifting axle Gjdjy Hk I Espfx Aatsbt Air suspension with lifting/lowering function Swing doors Lashing rails Lashing rings Plywood box body 1x 15-pin 24V power connection 2x 7-pin 24V power connections ABS/EBS Unladen weight: 6,980 kg Internal cargo space dimensions: L 13.62 m, W 2.49 m, H 2.70 m Tyres: 385/65 R22.5 Tread depth: 1st axle left/right: 14 mm / 14 mm 2nd axle left/right: 14 mm / 14 mm 3rd axle left/right: 12 mm / 12 mm