Used Bottarini Bottarini Ksv 15 for sale (15,990)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Nsdpfxowu Dbuo Alhjlc Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: excellent (used), New Cybelec CybTouch 15 cnc touch screen control on our quality used Edwards Pearson 6axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson RTB 100 T / 3100 CNC Pressbrake Nodsq Ewkyopfx Alhjlc 3metre x 100ton / 3100mm New Cybelec CybTouch 15 touch screen cnc control that communicates with offline software – offline software for this cnc Cybelec control available 4 axis back gauge – z1, z2, x and r axis – 6axis in total Machine is in good working condition and includes a full length set of upper & lower Pressbrake tooling.

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Nljdpfexhffrjx Alhjc Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System The unit is in full working condition and is ready for immediate use Nlsdpfxox Tucto Alhec The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs.

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Nledpfxezddzrj Alhsc TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm CNC engraving and embossing machine – TSM series Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Njdjzc E Dfopfx Alhslc Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: used, Pump, DP Pumps DPVF 15/4 C, Used Machine Manufacturer: DP Pumps Type: DPVF 15/4 C Overall dimensions: Width: 300 mm Depth: 250 mm Height: 810 mm Weight: 50 kg Nodpoypuk Iofx Alhelc Electrical data: 400 V; 4 kW; 7,4A Flow rate: 18.2 m³/h Head: 46.1 meters

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Manufacturer: Andritz Nsdpov Dr Hfjfx Alholc Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Nlsdoh Dimnepfx Alhsc Diameter: 900 mm

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Max feed speed: 60 m/min Operating Units: 3 nr Nlsdpfewucknsx Alhjc

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm Nledpfxezdlwgo Alhjc - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2026, neu 2026 070224 September 2026, Zwischenv Türkei 25700 € 490.87 € 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Nlodpfewirldsx Alhoc Symbolic photos, picture incl. optional available bolster plate

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition Nsdpjydk Acofx Alhjlc TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Nsdpfx Alexzl Aqehslc Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2000, Control unit for electric forklifts, control system, control unit, interface, motor control, motor controller, control, drive control, drive current control -Handover: in its current condition as inspected -Connector plug: Damaged, see photos -Manufacturer: Linde, control unit from electric forklift E15Z-02 Nljdpszg A R Ajfx Alhsc -Type: LDC-20/15-FE02 -Mat-No.: 390 360 53 97 -Dimensions: 185/120/H65 mm -Weight: 0.6 kg

Condition: used, Used machine Nledpfx Alew Nad Hjhjc Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Nlodpfx Ajzfx Tkelhoc Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, Compressor in like-new condition (demonstration unit), only 2000 hours of use. We are an authorized dealer. New list price: €32,074. Main features: Maximum pressure: 10 bar Nlodpfx Aezdf Iyslhsc Power: 15 kW / 20 hp Flow rate: 2940 liters/min

Condition: good (used), Year of construction: 1979, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Manufacturer: JJSietas, crane traverse compensating traverse, for transporting different loads -Loading capacity: 15 t ( 6x 2.5t ) -Load hooks: 6 pcs. with sheet metal claws, clamping range 0 - 25 mm, see photos -Dimensions: see photo sketch Dimensions: 8520/240/H620 mm Nsdpolbdl Esfx Alholc -Empty weight: 1200 kg

Condition: like new (used), WEIMA WL 15 crusher chipper crusher – technical documentation Nsdpfx Ajfm Tp Dslhslc – year of production 1992 TECHNICAL PARAMETERS : main engine power 37 kW motor power from the hydraulic pump 1.5 KW total power: 39.25 kW AUTOMATIC REVERSING HYDRAULIC DRAWER shaft rotation 90 U/min rotor length 1500 mm Knock multi-knife shaft 36 knife dimensions: 35 x 35 mm sieve fi 20 / 15 mm height of the pressure drawer 180 mm chip collection viper rotor diameter 245 mm hopper size 1500 mm x 1500 mm drawer length 1000 mm dimensions (length/width/height) 270 x 240 x 280 cm weight 4000 kg

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 0-201-71-5926, For sale as part of the insolvency proceedings 5-axis CNC woodworking center Homag Centateq P-500 Profi BMG511/60/15/F/A, Year of manufacture 2021, with Homag control system, Widescreen TFT monitor Dell and accessories - Main usage approx. 5,200 hours - Secondary usage approx. 2,910 hours - Total operating time approx. 11,960 hours - Operating time approx. 12,050 hours Njdpfx Ajzfyxnelhelc Please contact us to arrange a viewing appointment. (The properties described here in the order confirmation (attachment) only provide an overview of the delivery at the time. The machine will be sold as is at its current location, as it was viewed or could have been viewed.) Stair design software will not be sold with the machine. To the best of our knowledge (without guarantee), the internal HOMAG WoodWop program is installed on the machine and can be continued to be used with licenses purchased from HOMAG.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R Nsdszd S Thepfx Alholc - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: max bar 10 power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me. Nledpfewcm Hiox Alhjc

Year of construction: 1980, condition: good (used), with initial rounding Nljdpfx Alskzg E Ajhec Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,778 h, load capacity: 1,500 kg, lifting height: 6,800 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, battery capacity: 1,000 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, DGUV certified until: 06/2027, fork length: 1,200 mm, tire condition: 100 %, Equipment: CE marking, UVV, full service history, lighting, sideshift, Still RX 50-15 electric three-wheel forklift with the following specifications: * Lifting capacity: 1,500 kg * Lifting height: 6,800 mm * Overall height: 2,850 mm * Operating hours: 6,778 * Year of manufacture: 2015 Njdpfoywrraox Alholc Still 1.5-ton electric three-wheel forklift, open cabin, brand-new battery, new tires, triplex mast with full free lift, side shifter, mini-lever, fork length 1,200 mm, charger new. Upon request, the following option is available at an additional cost: white, non-marking new tires (see photo). Includes 1,000 hours of service according to Still manufacturer’s specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by prior appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). Further information and offers can be found on our website.