Used Ceramic Backings for sale (3,815)

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. Nsdpfx Aszfyu Asiyjda The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing Nodpfx Aszv Tibsiyoda - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Year of construction: 2012, condition: used, A Sabal backpart moulding machine for shaping shoe counters and heel areas is offered. Hot activation stations: 2, cold pressing stations: 2, quick-change device for pads and lasts, pincer pull device: adjustable with millimetric precision, pincer pull at activation and pressing stations, valve monitoring, mechanical stops at the pressing stations, switchable heated pressing station for processing Lefa counters, flanging function. Weight: approx. 600kg, machine dimensions X/Y/Z: approx. 1760mm/800mm/1750mm. Documentation available. An on-site inspection is possible. Ndjdszvghwspfx Aiysa

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Nodoib H U Dspfx Aiyoda Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Condition: excellent (used), Catalog number: 8090 TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 160 mm - 2 units: * from above: - metal roller, pressure roller - 1) grooved rubber roller for calibration - metal roller, pressure roller - 2) metal roller + backing + metal roller - metal roller, pressure roller * from below: - 2 rubber rollers, slip rollers - conveyor belt - 2 rubber rollers, slip rollers - grinding thickness potentiometer - belt blowing system - pneumatic belt oscillation - electric table lifting + manual (for precise adjustment) - stepless feed rate adjustment - with pneumatic brake - total power: 16 kW - diameter of dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1850 x 1600 x 1900 mm - weight: approx. 1200 kg ADVANTAGES – 2 units – Italian production – unpainted Ndjdpfx Aiezwgacoyoa – used grinder, very good condition Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge Nedezrnrcspfx Aiyeda CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Ndjdpfx Aiszkb T Djyea Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1984, operating hours: 2,500 h, functionality: fully functional, volume flow: 4.5 m³/h, type of input current: three-phase, total height: 1,450 mm, overall weight: 110 kg, space requirement width: 800 mm, space requirement length: 1,600 mm, Paint mist extraction system Wiedenfeld Type: WW 455 WK1 Year of construction 1984 in operation until 1992 Triple filtration wet-dry-fine Machine data: Footprint approx. width 1600 mm Depth 800 mm incl. 100 mm wall clearance Height 850 mm + activated charcoal filter 600 mm Return air filter ceiling width 2000 mm Depth 1350 mm Height 220 mm Exhaust air and deflector element for supply / exhaust and mixed air available Control cabinet See pictures for further description and data Accessories: Activated charcoal filter 600 x 600 x 600 mm Filter mats Ndsdpougu Ufofx Aiysa System fully functional Condition used but well maintained

Condition: used, Stock of ceramic products from bankruptcy of importer. Ndsdpsxa Einjfx Aiysa Originally about 3 full containers. Currently, at least 2 containers/truckload are needed.

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Ndedpfx Aiozr Ntheyoa Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, type of input current: three-phase, workpiece weight (max.): 500 kg, input voltage: 380 V, travel distance X-axis: 3,650 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 150 mm, repeat accuracy: 0.02 mm, table length: 6,000 mm, table width: 2,000 mm, Shuttle SH-4020 – 5-axis abrasive waterjet cutting machine, year 2019 Large-format 5-axis waterjet system for precision cutting of natural stone, engineered stone, ceramics, glass, composites, and metals. The machine has been in regular production use in a stone fabrication facility and is fully operational, available for inspection while powered on. Key Features Generous 3650 × 1900 mm cutting area – handles full slabs and large plates. 5-axis cutting head for bevels, chamfers, miters, and taper-compensated cuts. High-pressure intensifier pump, 37 kW, up to 380 MPa (55,000 psi). Repeatability ±0.02 mm. Table capacity: 500 kg workpiece weight. Cold cutting process – no heat-affected zone, no material distortion. Ndedpfjzvdhnjx Aiysa Ready for immediate relocation; located in the EU with convenient transport options across Europe. Suitable for: stone and quartz fabrication, architectural elements, inlay and waterjet mosaics, glass and ceramic processing, sheet metal and composite cutting, and job-shop contract cutting.

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Nedpjzb A Rgjfx Aiyoda

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Nodpezwhtdofx Aiyeda

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Ndsdpfx Aexgb Nqjiyea Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Good working condition. Please chech out out other listings as well.

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable Njdpfszv Ul Dox Aiyjda * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: used, Year of construction: 2003, functionality: fully functional, BOTTERO LAMILINEA 501 – Year 2003 Laminated Cutting Table Monolithic Sheet Thickness: 3 – 10 mm Laminated Sheet Thickness: 33.1 – 88.12 mm Maximum Dimensions: 2400 x 3200 mm Nsdpjztnz Hsfx Aiyjda Power: 14 kW

Condition: reconditioned (used), Roller kiln for firing ceramic, gres, and porcelain, length 18 meters. Kiln after overhaul, equipped with completely new control system. Njdpfsxu Ny Hjx Aiyeda

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents Ndodoualalepfx Aiyea - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 180248, compressed air connection: 6 bar, input voltage: 230 V, total width: 950 mm, total length: 1,500 mm, type of input current: AC, overall weight: 250 kg, air demand: 10.2 m³/h, input current: 1 A, pneumatic connection: 6 bar, Eickmeyer TIC PRL4M-IP – 4-colour pad printing machine – demonstration model Professional 4-colour pad printing machine Eickmeyer TIC PRL4M-IP. Year of manufacture: 2018 Serial number: 180248 The machine was purchased by us directly from Eickmeyer in Germany in 2021 as a demonstration model. Since the purchase, it has been used only to a very limited extent in our production, as we operate other pad printing machines. The machine is fully functional and in very good condition. Technical specifications: 4-colour pad printing machine floor-standing model electro-pneumatic control microprocessor control with display closed ink system 4 × ink cups Ø 90 mm with ceramic doctor rings cliché size: 4 × 100 × 250 mm servo-controlled sliding table sliding table height-adjustable via spindle additional individually controlled cylinders for each printing pad suitable for multicolour printing on larger or longer objects pad pressure: 168 kg at 6 bar compressed air supply: 6 bar power supply: 230 V / 50 Hz safety guards emergency stop two-hand operation Nedpfxezvgt Hs Aiysda CE marked The machine is offered in the same configuration in which it was purchased from Eickmeyer. Purchase price from Eickmeyer in 2021: EUR 16,500 net. The original purchase invoice is available. The machine can be inspected and tested in operation by appointment. Location: Slovakia, Banská Bystrica region. Transport within Slovakia, Czech Republic and Hungary can be arranged by us. Transport to other EU countries can also be organised upon request. Price: EUR 9,900 net, EXW Slovakia (Incoterms® 2020). Transport can be arranged upon request at additional cost. Reasonable offers are welcome.

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2021 by the premium manufacturer Rational (successor to the VCC 211). A major inspection was carried out in our in-house workshop, and the iVario L is in excellent condition. The offer does not include any accessories, but they can be purchased separately for an additional charge. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Nodpfx Aozvndtsiyjda Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21038052776 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional Further details: Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosing High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pot base temperature, adjust oil temperature Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: good (used), functionality: fully functional, Lot 1: Ndjdpfxeyzwzhs Aiyoa Height: 3,500 mm. Width: 8 x 2,700 mm. Depth: 5,200 mm. Shelf/beam load capacity, Euro pallet: 5,750 kg. Shelf/beam load capacity, block pallet: 7,500 kg. Quantity: 6 x as described above. Includes impact protection. Lot 2: Height: 3,500 mm. Width: 7 x 2,700 mm. Depth: 5,200 mm. Shelf/beam load capacity, Euro pallet: 5,750 kg. Shelf/beam load capacity, block pallet: 7,500 kg. Quantity: 2 x as described above. Includes impact protection. Price: €0.65 per kg. This is a large, high-volume lot. Availability by arrangement, around mid-May 2026. The shelving will be dismantled and packed by the seller.

Condition: used, mileage: 1,15,650 km, power: 90 kW (122.37 HP), first registration: 05/2023, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special Equipment: Audio navigation system Discover Pro Streaming & Internet (touchscreen, Bluetooth, USB), Business Package Premium with navigation, luggage securing net, Mobile Online Services We Connect Plus, tire repair kit (Tire Mobility Set), special paint finish in Tornado Red (solid), reversible luggage compartment mat, additional winter tires (customer specification required). Nedeytlb Eepfx Aiyoda Further Equipment: 3-point seat belt rear center, driver/front passenger airbag, front passenger airbag deactivatable, antenna diversity, traction control (ASR), Comfortline / Life / Business equipment, automatic headlight control (ALS) with Leaving Home / Coming Home function, left and right aspherical exterior mirrors, electrically adjustable and heated exterior mirrors, painted exterior mirrors, left exterior mirror with automatic dimming, outside temperature display, integrated indicator in exterior mirror, brake assist, Chrome Package (1), chrome trim strips on side windows, headliner fabric in grey, roof rails, dual-tone horn, front and rear parking assist, LED entry lights in doors, electronic differential lock (EDS), electronic stability program (ESP) with electromechanical brake booster, driver assistance system: trailer stabilization program, driver assistance system: automatic distance control (ACC incl. stop & go function), driver assistance system: hill start assist, driver assistance system: pedestrian detection, driver assistance system: multi-collision brake, driver assistance system: fatigue detection, driver assistance system: lane keeping assist (Lane Assist), driver assistance system: ambient monitoring system (Front Assist) with City Emergency Braking function, electric windows front and rear, remote tailgate unlocking, tinted laminated windshield, textile floor mats, LED footwell lighting in front, adjustable luggage/load compartment floor, luggage compartment partition (cargo net), luggage compartment cover/roller blind, luggage compartment lighting, front cup holders with cover, glove compartment with cooling function, LED rear lights, rear window wiper, interior trim: Cross Hatch decorative inserts, interior trim: Piano Black/gloss black centre console inserts, interior mirror with automatic dimming, proactive occupant protection system, Isofix child seat anchorages for rear seats (incl. i-Size child seats), 5-door body, LED license plate lighting, Keyless Start, child safety lock in passenger compartment, front and rear head airbag system including front side airbags, rear headrests (3), loading sill protection (plastic), lumbar support and backrest tilt adjustment, front left electrically adjustable, leather multifunction steering wheel with shift function, manually adjustable steering column (steering wheel), height and reach adjustable, front and rear LED reading lights, alloy wheels, rear center armrest, height and length adjustable front center armrest, Mobile Online Services preparation for We Connect and We Connect Plus, Mobile Online Services We Connect, model update, engine 2.0L - 90 kW TDI, Premium multifunction display (color), LED fog lights with integrated cornering light, rear fog light, non-smoker package, emergency call system, electric parking brake with auto-hold function, digital radio reception (DAB+), tire pressure monitoring system, split rear seat backrest with center armrest and through-loading facility, remote folding rear seat backs, low emissions to Euro 6d emissions standard, leather gearshift/selecto

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 5125781, Alfa Laval ALDEC 45 Decanter Centrifuge – For Sale Alfa Laval ALDEC 45 industrial decanter centrifuge in very good working condition. The machine has been well maintained and is suitable for continuous solid-liquid separation applications. Key Specifications: Manufacturer: Alfa Laval Model: ALDEC 45 Year: 2014 Nsdpfxjzu S Uys Aiyeda Machine / Serial No.: 5125781 Maximum Bowl Speed: 4,200 rpm Main Motor: Approx. 22 kW Back Drive Motor: Approx. 5.5 kW Bowl Diameter: Approx. 360 mm Processing Capacity: Approx. 3–15 m³/h, depending on feed characteristics and separation requirements Continuous industrial operation Heavy-duty stainless steel construction Location: Türkiye Condition: Very good, ready for operation Suitable for various industrial separation applications, including wastewater treatment, sludge dewatering, chemical processing, food processing and other solid-liquid separation processes. The machine is available for inspection. Additional photos, technical details and videos can be provided upon request.

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We are offering the following used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please send us a message or call us. No. Cart Type Condition Width/Depth/Height 400 Peel board cart VTR 10.12,5.08 2 865 875 1980 401 Peel board cart VTR 10.12,5.08 2 865 875 1980 402 Peel board cart VTR 10.12,5.08 2 865 875 1980 403 Peel board cart VTR 10.12,5.08 2 865 875 1980 404 Peel board cart VTR 10.12,5.08 2 865 875 1980 405 Peel board cart VTR 10.12,5.08 2 865 875 1980 406 Peel board cart VTR 10.12,5.08 2 865 875 1980 407 Peel board cart VTR 10.12,5.08 2 865 875 1980 408 Peel board cart VTR 10.12,5.08 2 865 875 1980 409 Peel board cart VTR 10.12,5.08 2 865 875 1980 410 Peel board cart VTR 10.12,5.08 2 865 875 1980 411 Peel board cart VTR 10.12,5.08 2 865 875 1980 412 Peel board cart VTR 10.12,5.08 2 865 875 1980 413 Peel board cart VTR 10.12,5.08 2 865 875 1980 414 Peel board cart VTR 10.12,5.08 2 865 875 1980 415 Peel board cart VTR 10.12,5.08 2 865 875 1980 416 Peel board cart VTR 10.12,5.08 2 865 875 1980 417 Peel board cart VTR 10.12,5.08 2 865 875 1980 418 Peel board cart VTR 10.12,5.08 2 865 875 1980 419 Peel board cart VTR 10.12,5.08 2 865 875 1980 420 Peel board cart VTR 10.12,5.08 2 865 875 1980 421 Peel board cart VTR 10.12,5.08 2 865 875 1980 Ndsdpfx Aiezf Hiaoysa 422 Peel board cart VTR 10.12,5.08 2 865 875 1980 423 Peel board cart VTR 10.12,5.08 2 865 875 1980 424 425 426 Baking cart VTR 10.12,5.10 2 1065 650 1930 427 Baking cart VTR 10.12,5.10 2 1065 650 1930 428 Baking cart VTR 10.12,5.10 2 1065 650 1930 429 Baking cart VTR 10.12,5.10 2 1065 650 1930 430 Baking cart VTR 10.12,5.10 2 1065 650 1930 431 Baking cart VTR 10.12,5.10 2 1065 650 1930 432 Baking cart VTR 10.12,5.10 2 1065 650 1930 433 Baking cart VTR 10.12,5.08 2 1065 650 1930 434 Baking cart VTR 10.12,5.08 2 1065 650 1930 435 Baking cart VTR 10.12,5.08 2 1065 650 1930 436 Baking cart VTR 10.12,5.08 2 1065 650 1930 437 Baking cart VTR 10.12,5.08 2 1065 650 1930 438 Baking cart VTR 10.12,5.08 2 1065 650 1930 439 Baking cart VTR 10.12,5.08 2 1065 650 1930 440 Baking cart VTR 10.12,5.08 2 1065 650 1930 441 Baking cart VTR 10.12,5.08 2 1065 650 1930 442 Baking cart VTR 10.12,5.08 2 1065 650 1930 443 Baking cart VTR 10.12,5.08 2 1065 650 1930

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm Nedpfx Aezv Ulwjiyeda turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.