Used Cronosstech H-Type 400/150 Ton Hydraulic Deep Draw Press for sale (98,305)

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Hodpfxsdzp Trs Abhenp Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Hsdpfxofin Hws Abhenp Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Hnedpfx Ajd Rlk Hsbhsp Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Distance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Overhang: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis retraction speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 Motor power: 37 Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25000 kg Standard equipment: Control system: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes of the rear stop: X1, X2, R1, R2, Z1, Z2 Control system: DELEM DA-66T Delem 66T – 69T or Durma control system can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending assistance 750 mm to 1500 mm selectable Parking area for support arms (1000 mm) TANDEM preparation Laser bending line Oil heating Hjdpfx Aed Hy Hujbhenp Central lubrication, manual or motorized Air conditioning for the control cabinet Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Hnsdpfx Aewbtn Robhsp Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical specifications available upon request. AD-R 80400 Bending force: 400 tons Hnodpjfin N Sefx Abhjp Bending length: 8050 mm With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would be happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on-site to respond quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Hnjdpfowp Nv Hox Abhsp Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Hnedpfx Aey Efczsbhjp Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm Hnodpfx Abofxyh Rshjp stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. Hsdeph Uk Nspfx Abhenp (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Hodjin Et Nepfx Abhenp Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) Hnodpsg Iihwofx Abhjp v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t Hnjdpfxofh Izmo Abhop travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? Hedpfxsfxygpo Abhonp :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz Hnjdpsfxyirefx Abhep :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm Hnsdoyz Dtdepfx Abhep - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec Hedpfxjfxyh Ao Abhsnp :1000 kg

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Hnedpeguvtlofx Abhop Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Hnjdpjtrpiijfx Abhep Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Hsdpfsycin Uex Abhonp

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Hnsdpfx Abjd Ntd Dehop Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: used, Technical specifications: Max bending length: 4,100 mm Bending force: 400 Ton Maximum operating pressure: 300 Bar Approximate weight: 24,000 kg Minimum distance between photocell barriers and tools: 180 mm Motor power: 30 kW CNC control: Esa Machine compliant with CE standards. Hedpfxoxw T Sfe Abhonp

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t Hnsdpfx Asq Rhkwebhsp

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t Hodpfx Aovn U Sxjbhonp dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Hnjdpolp U Hgjfx Abhsp ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t