Used Epson Surecolor F500 for sale (118)

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) Fjdpoibx S Nofx Adregf St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: excellent (used), EPSON Robot Fgjdpjhx Rg Isfx Adrjf G6-451S Controller RC180 Robot

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Milling spindle swivel Feed mechanism FELDER F38 Milling table opening: 180 mm Fjdpszm U Dnsfx Adregf Milling fence for tool diameter max.: 220 mm Quick-change system for milling spindles (option) Speeds: 3000, 6000, 8000, 10000 RPM Fence ruler 320 mm, anodized aluminum Milling spindle working height 100 mm Milling spindle diameter 30 mm Milling fence 220 mm EURO milling guard Dust extraction connection 120 mm Working height 916 mm Weight 300 kg Height adjustment: manual Motor power 4.0 HP (3.0 kW) Motor voltage 400 V (50 Hz) Numerous accessories

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Fodpfxozimp Uj Adrjgf Technical Specification Taper Size BT 40 Through-spindle Coolant Yes

Condition: new, Omron F500-S1 digital camera, serial number: D121038, unused in original packaging, 100% functional, scope of delivery as per photos. Fsdpfx Adox Dw Rxeregf

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Fodpfx Adozlactorsgf Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Fedpfx Aew R E Hpodrogf Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Fgedpfxovmhqrj Adref Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,970 h, load capacity: 46,000 kg, lifting height: 16,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 74,500 kg, drive type: Diesel, construction width: 4,185 mm, Full-container Reach Stacker Load center: 1780 Transmission: Dana TE32000 Condition: Ready for operation and fully functional Technical condition: very good Front tire size: 18.00-25 Fedpozr Spxofx Adregf Rear tire size: 18.00-25 EN: Hydraulically sliding cabin, central lubrication system for chassis, boom + spreader, rear-view camera, air conditioning (automatic climate control), automatic spreader adjustment 20‘-40‘ DE: 2x central lubrication for chassis, boom and spreader, hydraulically sliding operator cabin with electronic air conditioning, automatic spreader adjustment 20-40, reversing camera

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 Fgsdpfxsznpgae Adrjf EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Fsdpfx Adszd Twbjrsgf Weight approximately 1600 kg Stock number: 1146

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3286502, overall weight: 5 kg, input voltage: 230 V, The DGYF 500C induction sealer is used for induction-electromagnetic sealing of aluminum caps under bottle caps. Key features: • Suitable for use with plastic or glass containers. • Very easy to operate. • Handheld device for small-scale applications. • Easy to transport; requires no dedicated workspace. • Packing speed of approximately 20-40 units/minute (depending on the operator and the product being sealed). • Maximum container diameter: 60-130 mm. • Maximum distance between the inductor and the container: 3 mm. • Activated by a switch on top of the inductor. Control panel: Fgedpfx Ajy S Rxhsdrsf • On/Off switch. • Fuse. • Digital display indicating current intensity. • Digital display indicating time. • Overheat protection – the device automatically shuts down until it cools down. The induction sealer comes with sealing foil, 85 mm in diameter, 2 packs of approximately 400 pieces each.

Condition: new, Year of construction: 2025, MODEL : HF500 6” (12”) NAME: PANT CRIMPING PRESS- HEAVY DUTY Power 500 Ton MAX CRINPING RANE: 310MM OPENING TRAVEL: + 115 MMM OPENING WITHOUT THIS : 360 MM 90° ELBOWS 3” Fsdpfx Ajwbtaasdrogf CLOSING SPEED: 18MM/SEC PRESSING SPEED: 1.4MM/SEC OPENING SPEED: 20MM/SEC NOISE LEVEL: 62 DBA DIVER: 5.5 KW 3 VAC SIMENE'S TOUCH SCREEN CONTROL PROPORTINAL PRESSURE POSOTONE CONTROL FIYAT: €64,000 DAP DELIVERY ON STOCK

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Fgodpfxezfp U Ee Adrsf

Condition: like new (used), functionality: fully functional, total width: 600 mm, total length: 855 mm, total height: 2,125 mm, Quick-freezing system for baked goods Gram model: SF500 G S RA L2 25B For a maximum of 20 trays, 600 x 400 Fodpfewyruasx Adrsgf Digital temperature display from +10 to -30°C Energy-saving system EHT Freezer, ready for connection Freezer with refrigerant R 290 A Connection: 230V Dimensions: 600 x 855 x 2125 mm (W x D x H) Used equipment, cleaned With warranty + spare parts service We have many more refrigeration units in stock!

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8389617, unused, 100% functional, scope of delivery as per photos Fedpfjrcwqysx Adregf

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8389618, unused, 100% functional, scope of delivery as per photos Fgjdpfx Asx Eur Eodrsf

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8512615, unused, 100% functional, scope of delivery as per photos Fgjdpfx Asx Eur Ssdrsf

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8537714, unused, 100% functional, scope of delivery as per photos Fgodpfx Adex Eutcjref

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8537719, unused, 100% functional, scope of delivery as per photos. Fgsdpfx Adex Dxa Ioref

Condition: new, Siemens 6FC5303-0AF50-0CA0 display OP 022-555 Ergoline 3 SN T-K86256051, unused, 100% functional, delivery contents as per photos. Fedpfex Dxa Uex Adrjgf

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL2479299, unused, 100% functional, scope of delivery as per photos Fgedpfercwqvjx Adrjf

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 07/2027, total length: 550 mm, total width: 550 mm, total height: 1,100 mm, input frequency: 50 Hz, year of last overhaul: 2026, TOP Semmelmühle Bread Flour Milling Machine Grinding Machine Simple, robust technology Capacity: 300 kg/hour Stainless steel hopper Connection: 400V, 16A CEE plug Dimensions: 550 x 550 x 1100 mm (W x D x H) Used machine & SAB inspected With warranty + spare parts service Optional: Coarse sieve Delivery service Service package Training & commissioning Fsdpfov N Tb Usx Adrsgf Many other TOP bakery machines in stock!

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm Fsdpfx Asu Nwwdedrjgf total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm Fjdpfju Nkm Ejx Adrsgf table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *