Used Helmet Rail Branch for sale (9,164)

Condition: used, We offer for sale: !! ARISE web edge control!! Ijdpfxjrlmtbs Adljtl Dimensions: 3x 25cm and 1x 30cm

Condition: used, mileage: 33,976 km, power: 100 kW (135.96 HP), first registration: 05/1990, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2020, color: red, gearing type: mechanical, Year of construction: 1990, Equipment: air conditioning, all wheel drive, compressor, Unimog U 1400, equipped for dual-mode operation Itedpfxji R Aics Adlsl Manufacturer: Zweiweg Torque converter Wagon braking system, 600 tons Coupler bar mounting at the rear

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Itsdpfxezgvx To Adlel Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Itjdpfszgv U Uox Adljl Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, Itjdpfx Aszgrzqsdljl depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Isdpfezgtzlox Adljtl Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: used, Year of construction: 2015, 1 unit of overhead traveling crane / single-girder suspended crane ABUS, 1000 kg capacity with electric chain hoist ABUS GM 4 1000.4-2, 6 supports, self-disassembly feature Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2015 Dimensions L/W/H: 1700x400x260cm Condition: used Itsdpszqbvxefx Adljl

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills Itsdpfx Aezd Ur Hedljl 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Itedpfx Adjzv Du Ioljl Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Itsdpfx Adex Azrdjljl Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: used, Approx. 60 double-meter (left + right) rails for log sorting carts Itodjzuy Tqepfx Adlol immediately available Location: Germany, near Lake Chiemsee.

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Itsdpjttc Uaofx Adlol

Condition: used, Webster & Bennett 72” V Series Elevating Rail Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Isdpfx Adozrm Sbelstl Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Newall 2 Axis Digital Read Out

Condition: good (used), Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm Isdpfxsznkrwe Adletl -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm -Weight: 10.1 kg

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock 56.50 running meters!!! Type BD2-400A / 400 Amp - 5 pole - L1 L2 L3 N PE Isdpfxorfwnks Adlotl Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m, 1.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 250A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2250A, Complete Klöckner Möller - Siemens BD2 - 250A busbar system available! Stock 81.25 running meters!!! Type BD2-250A / 250 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 400A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Iedpfsrfwngjx Adljtl Please ask ! Are you also looking for a crane system?

Condition: new, Year of construction: 2026, Petrol Wood Chipper R1500 The R1500 petrol wood chipper is a powerful and robust branch shredder designed for professional users involved in wood processing and disposal. Equipped with a reliable DUCAR engine with a displacement of 420 cm³ and a power output of 15 HP, it provides high efficiency and durability in both industrial and service applications. The machine allows fast processing of wood material into chips with a size of 20–40 mm, which can be used as fuel, compost material, or garden mulch. Main advantages of the machine High power and performance – the DUCAR OHV petrol engine ensures optimal operating parameters and long service life. Durable construction – the use of a cast iron cylinder sleeve increases wear resistance and improves lubrication. Advanced safety features – automatic ignition cut-off system and emergency safety switch located in the feed hopper. Easy operation and transport – folding feed hopper and large 45 cm diameter wheels make handling and mobility easier. Versatile applications – suitable for shredding both fresh and dry wood of various hardness levels. Design and technology The R1500 wood chipper is equipped with a belt drive system and centrifugal clutch, ensuring smooth and safe power transmission to the cutting drum. The knives are manufactured from Hardox 500 steel, which provides exceptional resistance to abrasion and significantly extends service life while reducing the need for frequent replacement of cutting components. Itedpfxevxtd Uj Adlel The feed hopper is positioned at an optimal angle to facilitate material loading, while the 360° rotating discharge chute allows precise direction of the chip stream. The self-feeding drum design improves efficiency and minimizes the need for manual material pushing. Precision and working efficiency The 15 HP engine, high drum speed of 2000 rpm, and two cutting knives ensure uniform and efficient branch processing. The chipper can handle: fresh softwood up to 120 mm in diameter, fresh hardwood up to 100 mm in diameter, dry hardwood up to 80 mm in diameter. This allows effective processing of various types of wood while maintaining high-quality chips. Applications The R1500 model is an ideal solution for companies involved in landscaping, agricultural farms, municipal services, and businesses processing wood waste. It is also suitable for sawmills and biomass production companies. The produced wood chips can be used in heating systems, as compost material, or as garden mulch. Standard equipment DUCAR petrol engine 420 cm³ / 15 HP Hardox 500 steel cutting knives Belt drive system Feed hopper with folding extension 360° rotating discharge chute Safety system with ignition cut-off Technical specifications Parameter Specification Drive system V-belts, centrifugal clutch Engine 15 HP, 420 cm³ Maximum cutting diameter (fresh softwood) 120 mm Maximum cutting diameter (fresh hardwood) 100 mm Maximum cutting diameter (dry hardwood) 80 mm Number of drum knives 2 Knife type Hardox 500 steel Material feeding Self-feeding drum Dimensions (L × W × H) 180 × 82 × 130 cm Feed hopper dimensions 57 × 52 cm Discharge chute rotation 360° Discharge chute height 130 cm Wheel diameter 45 cm Drum speed 2000 rpm Chipper weight 230 kg

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Isdpfx Adeyyhqdelstl

Condition: used, Year of construction: 2016, operating hours: 10,733 h, Equipment: all wheel drive, Internal vehicle number: G400121 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Atlas 1404 K ZW 4x4 Road-Rail Excavator | Road/Rail | Attachments | 20 t For sale: a used Atlas 1404 K ZW road-rail excavator, manufactured in 2016. This machine is designed for operation on both roads and railway tracks and is offered with several attachments. The excavator features four-wheel drive, a central lubrication system, air conditioning, auxiliary heating and a reversing camera. A CE declaration of conformity is available. Technical specifications: * Manufacturer/Model: Atlas 1404 K ZW * Machine Type: Wheeled Road-Rail Excavator * Application: Road and Rail * Year/Model Year: 2016 * Operating Hours: 10,733 hrs * Engine: Deutz TCD 4.1 L4 * Engine Power: 95 kW * Rated Speed: 1,800 rpm * Permissible Total Weight: 20,000 kg * Permissible Front Axle Load: 10,000 kg * Permissible Rear Axle Load: 11,500 kg Itodpfx Ajyzk Ihedljl * Vehicle Identification Number: 241 Z 301938 * Drive System: 4x4 * CE Declaration of Conformity available * Measured Sound Power Level: 96.2 dB(A) * Guaranteed Sound Power Level: 98 dB(A) * Technical Inspection: New * Vehicle Number: G400121 * Condition: Used * German Vehicle Equipment: * Road-rail equipment for road and rail operation * Four-wheel drive * Central lubrication system * Air conditioning * Auxiliary heating * Reversing camera * Load hook Attachments: * Grading bucket * Grab, 800 mm * Grab, 280 mm * Load hook Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: MK * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €1,025.02 Residual value

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Itjdszut Syopfx Adlsl Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)

Condition: new, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 5,950 mm, construction height: 3,410 mm, operating hours: 3 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V (5213) Mast: 2W5950 ID: 23079.5136 Mast: 2W Lowered height: 3410 mm Lifting height: 5950 mm Capacity: 1200 kg Platform height: 5350 mm Iodpfszut Stex Adletl Picking height: 6950 mm Cabin width: 1200 mm Year: 2019 Hours: 3 hours Capacity: complete NEW * 48 V / 465 Ah * Year of manufacture 2026 Options: FULL options!! - SAFETY doors with TILTING FUNCTION!!! - Equipped with side guidance (INCLUDING side roll/wheels!!) Complete NEW / Unused!!!

Condition: good (used), Year of construction: 2014, operating hours: 6,884 h, load capacity: 1,300 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 3,250 mm, Manufacturer + model:MAGAZINER EK 1300Mast:2W5700 ID:25072.5431 Cat.:Used Mast:2W Forks:1200mm Lowered height:3250 mm Lifting height:5700 mm Capacity:1300 kg Platform height:4150 mm Picking height:5750 mm Init.:Yes Year:2014 Itedpfx Aozuti Eedlel Hours:6884 hoursCapacity:48 v / 930 ah Options:VNA truck / Man up - SAFETY doors with TILTING FUNCTION !!! - Side guidance / Rail Guidance

Condition: used, mileage: 69,510 km, power: 250 kW (339.91 HP), first registration: 06/2011, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,130 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, total length: 7,400 mm, total width: 2,400 mm, Year of construction: 2011, = Additional options and accessories = - PTO = More information = Number of cylinders: 6 Engine capacity: 6.871 cc Empty weight: 13.401 kg Carrying capacity: 5.199 kg GVW: 18.600 kg Price: On request Registration number: BZ-GZ-13 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Iedpfx Ajzucmtedletl Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Width: 65mm, Height: 22mm, Isdpfx Asualqksdlotl Weight: approx. 20Kg,

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Isdpfozmtcijx Adlotl Further technical information and detailed photographs can be provided on request.