Used Ife Aufbereitungstechnik Gmbh Khp 500X1500 9-S for sale (1,07,449)

Condition: used, Year of construction: 2016, Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement. Dedpfoz Irl Nex Ap Djwc

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Dodov S U Tqspfx Ap Djwc Remote Control. Lumber and Platens are combined transported 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and with Super drying-quality!

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Dwsdpfx Apszxcn Es Dsc Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 9,500 mm, total width: 1,000 mm, overall weight: 3,000 kg, Silo discharge screw conveyor for dried or wet sawdust. The system is in new condition and comes in its original packaging. The photo is a sample image – the system has never been installed. Discharge screw conveyor for silo internal diameter of 8.9 m. Discharge rate: 40 m³ per hour. Drive power: 15 kW. Lower section: Dodpfx Ajz Ix Iqop Djwc for accommodating the screw conveyor drive, feed drive, main shaft with metering device, and bearings, discharge chute, and blockage sensor. Upper section: with screw shaft, cross-roller swivel joint, and cover hood. Electrical control system is not included!

Condition: new, Year of construction: 2026, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS6090 Max Pro The speed champion! Printing area: 70x100 cm Printing height: 150 mm Dedpfx Asfvyagjp Djwc Vacuum air table Water circulation system Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV - 18 channels) 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing Dimensions: 1900x1600x1220 mm Weight: 400 kg

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Dwsdpfx Apezrh D So Djc Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. Djdpfx Aofnh Rvep Dswc If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Dwjdpfxshvikuo Ap Dec

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) Dsdpfxjzzyg Dj Ap Dowc total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: used, functionality: fully functional, Floating grabber excavator plant, complete with floating conveyor belt Manufacturer: Rohr Bagger GmbH Type: RS 8.0/280-G Base year of construction: 1992 Grabber capacity: 8 m³ Crawler undercarriage with lifting mechanism and counterweights Hydraulic grabber Raking grate with oversized material slide Oscillating feeder Dewatering screen, Svedala, year of construction 1998, type H2PP 6000 x 2500 Excavator discharge conveyor, Bleichert Rohr, year of construction 1996, type TRV 9.1/1000 Transformer station Dwedjzkmmvjpfx Ap Djc Schneider, year of construction 1996, type TS 61440, 800 kVA Floating conveyor belt system Year of construction: 1992 Total length approx. 250 m, belt width 800 mm Barge / oversized material barge, year of construction 2005, 15 m x 5 m x 2.75 m, loading volume 40 m³, approx. 45 t.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, input frequency: 50 Hz, input voltage: 400 V, empty load weight: 50 kg, Tool tempering heating: 9 kW. Temperature: 150°C. Dodpfezab A Eex Ap Dswc

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips Dwedpfxezbvy Ie Ap Djc - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Year of construction: 2016, condition: as good as new (ex-display), 1 piece. Heavy-duty gearbox Manufacturer: NORD DRIVESYSTEMS Type: SK9082.1/52 1 piece, left-hand version Shaft diameter 110 mm, shaft length 210 mm M/2 12000 Nm i123.13 Overall dimensions (horizontal mounting): Length 1200 mm Width (with shaft 210 mm) 600 mm Dwsdpfjh Igwhsx Ap Djc Height 600 mm Weight per unit: 620 kg Like new, only test run. Can be mounted horizontally or vertically.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Dwedpfjzizkyjx Ap Djc Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Dsdez Agv Uopfx Ap Dowc - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Dwsdpoz Agw Eofx Ap Doc - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Dedpfx Aoz Ag Rrjp Dswc - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Dsdpfx Aszz Rpcop Dewc - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: Dwedpfxsnh R Suj Ap Doc - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Dsdpfxetwb U Aj Ap Djwc Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Dsdszr T Dkopfx Ap Dswc Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Dwsdpozvx Dkjfx Ap Dec Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: used, Year of construction: 2024, functionality: fully functional, The bunker conveyor belt from Lange Fördersysteme is for sale; it was previously used in a company that manufactures medical products. Dwedpjzyrt Tjfx Ap Dec Conveyor belt length: 2200 mm Discharge height: 2450 mm Usable width: 170 mm Mounted on adjustable feet within an aluminum frame. White belt with 30 mm high cleats spaced 145 mm apart. Bunker: L: 1300 mm x W: 800 mm x D: 700 mm, covered with a Makrolon sheet. Base frame: L: 1500 mm x W: 900 mm Connection via Harting connector.

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control Dwjdez Db Nijpfx Ap Dsc - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Dwodeyzhmbopfx Ap Dsc Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.