Used Krause Book Back Rounding Machine for sale (67,219)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Dcjdpfx Aozcqy Eei Sen Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Dodpfx Ajz E Damei Secn Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. Dodpfszyz Efox Ai Socn This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Dcedpfx Aijy D D A De Sjn Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long Dcedozyuckjpfx Ai Sen The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. Djdpfx Aijzxn Auj Secn You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Djdpfsz Dtcbex Ai Secn Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A Dcjdpfxsfdzwyj Ai Sjn -new machine

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Dedpozpfiysfx Ai Secn Video available upon request!

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Djdpfxjxqd I Dj Ai Sjcn

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Dcodotx Ux Repfx Ai Sjn Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Dedpfez Dtb Rox Ai Socn Flexible speed control.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KOLBUS DA 260 Dodpfx Aiez Ebbns Sjcn Case Making Machine Manufacturer Kolbus GmbH & Co KG, Rahden, Germany Production Year 2015 • Max. speed 40 cycles/min • Spine strip (roll) max. 500 mm • Mounting diameter 60 mm • • Production options: • • Book cover: • Open format min. 140 x 205 mm • Max. 390 x 670 mm • Hinge width 4 – 18 mm • Outer insert width 14 – 120 mm • Closed hinge width 8 – 15 mm • • Canvas in the spine of a book • Width 223 – 708 mm • Height 130 – 428 mm • Cover boards: • Thickness 1 – 4 mm • Width 95 – 328 mm • Height 140 – 390 mm • Spine board: • Thickness 1 – 4 mm • Width 6 – 90 mm • Spine strip (roll) • Thickness 0.3 – 0.6 mm • Width 6 – 90 mm • Availability immediately Sale Reason production reduction Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Dedpfxeztpbno Ai Socn Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock Dodpfx Aiszxdhmo Socn

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Djdpfx Aisy Siprs Socn Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Max. format: 320 x 480 mm

Condition: new, Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 7IMB, working width: 420 mm, warranty duration: 6 months, operating speed: 500 mm/s, Komfi ImiJET-BE70 Book Edge printing machine Dcjdpjziiduofx Ai Son Book edge printing machine offers special look to your books with possibility of personalized data printing. Semi-automatic operation: manual feeding and unloading of books, the printing process is controlled automatically. Printing heads using oil-based inks are easy to clean with minimum risk of stuck nozzles. Variable data (multi-page PDF), variable resolution (180 x 360, 360 x 360, 720 x 360 dpi) and variable multi-pass printing possible. Different adapters for wire-o binding, so covers and hard covers, flat piles to get the best result. Options: Oil-based ink ready Manual feeding & unload Automatic print process Variable data & resolution Parameters: Production speed: 180 edges/hr Max. production speed: 30 m/min Paper weight 115-350 g/m2 Min. book dimensions: 100 x 100 x 5 mm Max. book dimensions: 420 x 420 x 70 mm Printing heads: 4x Konica Minolta For customers who want to stand out from the competition and offer unique printed products. Soft cover books, hard cover books, colored brochures, wire-o products, notepads, note blocks, business cards. Economical run due to less expensive consumables and low risk of stuck printing heads. High quality components used to guarantee reliable and low service production.

Condition: used, Year of construction: 1979, machine/vehicle number: 58, Rundegerät für Buchdecken / Rounding machine for book cases Schmedt PräRund Serial-No. 58 Online-Video-Inspection by Skype-Video Dsdpotzc R Eefx Ai Secn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, Scope of application This machine can be applied to hard-shell hardcover book, soft book, card book, etc., with high precision, book square, lining paper glue uniform, three sides of the drift consistency, to overcome the characteristics of uneven glue, CAM structure at the same time on both sides of the glue, can achieve the cartoon book side to retain a centimeter empty, shell positioning accuracy, to ensure the consistency of products. Features of the machine 1, using Delta PLC control system; 2, Delta servo control motion system; 3, weinview touch screen operating system; 4, anti-scratch shell cover system; Dedpfjyzdu Ujx Ai Secn 5, the back automatic positioning structure system; 6, quickly replace different sizes of product structure system; Machine speed 6-12 copies/min Machine size 2390x1000x2060 Power 3kw Maximum size 330x300mm Minimum size 150x60mm Machine weight 750kg

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Dcedszt H Uxspfx Ai Sjn Made in Germany.

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Djdoy Sip Espfx Ai Sscn Complete with 1 pump Max format: 350 x 50 cm

Year of construction: 2017, condition: good (used), Conical rounding machine - used Dedpfx Aijzm Rfue Sjcn - year of manufacture 2017 - rounding length 3.6 m - lubrication option - air blow option - machine from production - technically sound - collection from warehouse / shipping option available - price on request

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. Dcsdpsyr E Ezefx Ai Sen - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: used, functionality: unexamined, Adapter and gluing machine VEA 520 see images Dcodpfxjzua Izs Ai Sen untested, price includes loading

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 337, Kolbus DA 260 case-making machine - Device for applying inner lining with hot glue - Automatic case counter - Single case request for control purposes, initiated from the operating side - Infinitely variable drive - Safety standard compliant with CE directives and specifications Technical data: Size range of open case: min.: 205 x 140 mm max.: 670 x 390 mm Joint width: 4 – 15 mm Width between boards: 14 – 120 mm Turn-in width, closed: 8 – 15 mm Cloth: width: 223 – 708 mm height: 130 – 428 mm Boards: thickness: 1 – 4 mm width: 95 – 328 mm height: 140 – 390 mm Dcjdpfoz Hlywsx Ai Son Board center strip: thickness: 1 – 4 mm width: 6 – 90 mm Center strip roll: thickness: 0.3 – 0.6 mm width: 6 – 90 mm Inner lining dimensions, dependent on glue processing: width: 195 – 670 mm height: 130 – 390 mm Do not hesitate to contact us for more information. The machine is still in production.