Used Mcconnel Robocut T500 for sale (183)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) Nsdpsxmrwfofx Aqvjlb • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW Nlodpfx Aema Dkfjqvob two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1990, functionality: fully functional, Lifting table with roller conveyor and hydraulic unit Manual control Lifting capacity: 5000 kg platform length: 6700 mm Njdpfx Aoymz Sgeqvslb platform width: 1500 mm Overall height: 630 mm Maximum height: 2200 mm

Condition: good (used), Welding rotary table KT 500, with 100mm through hole Load horizontal 500 KG, tilted 250 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W table diameter 700mm height 700mm, width 800mm, length 800mm Weight 155 KG Tilt range stepless electric 0 - 90 speed 0,3 - 2,5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick clamping - jaw chuck Diameter 400mm, 530.-€ CE-sign/approval Nledpfx Aqsb U Havsveb

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand Nlsdpsrft Nzefx Aqvsb with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Nodpfxsvu Syys Aqvelb Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° Nodpfx Aou N D I Aeqvelb weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Condition: refurbished (used), Year of construction: 2015, operating hours: 50 h, The machine is under power, in exellant condition with minimum working hours. Nljdpegwlaqjfx Aqvjb

Year of construction: 1992, condition: good (used), degree 220 total power requirement 50 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 2600 x 1600 x 1600 mm Nedpfx Aqex Ti Dxovolb

Condition: used, Year of construction: 2003, machine/vehicle number: 0-250-06-3472, WEEKE BHT PROFILANE 500 Nljdpfowl Dp Hsx Aqveb YEAR 2003 PRICE 15,000 EUR

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Nljdpfey Spu Uox Aqveb Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 120 mm Nedpfxeya Hh To Aqvslb

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Nodpfjxc Nyvjx Aqvolb Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, Year of construction: 2025, New Optimizing saw SALVACUT 5000 by SALVAMAC Nedpfen E Sl Rex Aqvolb Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. From an idea of Salvador Christian.

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 09/2025, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,474 mm, total height: 2,715 mm, loading space length: 4,073 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 30623 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Passenger airbag * Fixed tow bar, 13-pin socket – incl. trailer stability control (TSC) * Bi-xenon headlights with static cornering light, LED daytime running lights * Load compartment protection package 1: "Easy Clean" load floor – wheel arch cladding – high sidewall cladding * Load compartment protection package 2: load compartment lighting (LED) – 95 l fuel tank * Sliding door, left * Seat package 8A: driver's seat 4-way adjustable – double passenger seat – height-adjustable headrests – independently and variably heated driver's seat & outer passenger seat – folding tray at double passenger seat – driver's inner armrest – driver's lumbar support – cloth seat covers – heated leather steering wheel * Auxiliary heater package 2: auxiliary heater (fuel-powered additional heater), programmable, incl. remote control, 2 batteries, and anti-theft alarm system ADDITIONAL EQUIPMENT * Front axle load increase to 2,100 kg * Driver airbag * ABS with electronic brake-force distribution – ESP with traction control – hill start assist – crosswind assist – emergency brake assist – rollover protection – emergency brake support incl. emergency brake light – trailer stability control only in combination with tow bar * Exterior mirrors, electrically adjustable, heated, and power-folding * Exterior mirrors, short arm * Battery: battery runtime, programmable runtime up to 10 min * On-board computer with consumption and mileage data (e.g., range) and outside temperature display, Ford ECO-Mode * Headliner in driver's cab * Twin rear wing doors with 256° opening, (no windows) without rear windows, with retaining magnets * Front electric windows with quickdown/-up function for the driver * Mechanical parking brake * Ford Easy Fuel – convenience fuel cap and misfueling prevention * FordPass Connect – incl. live traffic information and Wi-Fi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Speed limiter 90 km/h – non-deactivatable * Lockable glove compartment with lid * Interior lighting with delay function and front reading lamps * Automatic climate control – with automatic temperature regulation * Load compartment lighting * Steering column adjustable for height and reach * Fog lights * eCall emergency assistance * Technology package 6P: Blind Spot Assist incl. Cross Traffic Alert – audio system – LED downlight – Pre-Collision Assist with camera and radar – reverse emergency braking assist – lane keeping and lane departure warning – extended traffic sign recognition – front/rear Park Pilot system – adaptive cruise control with stop & go – surround view camera – navigation * Diesel particulate filter * Radio accessories: 12" multifunction display and Ford SYNC 4 communication and entertainment system with voice control, Bluetooth, and USB interface – integration of various telephony functions and hands-free operation via voice command – integration of storage media – emergency assistance – Ford Power-Up software updates – Android Auto and Apple CarPlay support, AppLink (wireless) – capacitive touchscreen technology – 15 languages * Wheels/Tires: spare wheel, steel rim * Wheels: full wheel covers * Wheels: dual rear wheels – 6 J x 16 steel rims with 205/75 Nsdpfx Aexdup Ejqvolb

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Nedey Nkyaopfx Aqvslb No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Technical specifications: Nedpfx Ajy Uwt Djqvslb - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min - Delivery rate: 950 L/min - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Nedjy Uwlaspfx Aqvslb Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Unimat 500 Nlsdpfxey E Sizo Aqvjb Working width: 230 mm Working height: 120 mm Number of spindles: 5 Spindle configuration: Bottom Right Left Top Bottom Feed speed adjustable via inverter up to 30 m/min Feed motor Drive through cardan shafts Pneumatic pressure rollers 3 axes controlled from the control panel (width, height, pressure roller position) CE certificate DTR documentation

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: 2 x polyjet print head spares (new) Nledpfsy S Rp Hox Aqvsb 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Njdpfx Aqed S S N Rovelb

Condition: excellent (used), approx. 3000 m² steel construction platform 2-storey used, good condition, see pictures Manufacturer STOW Length approx. 58,5 m Width approx. 54,6 m height lower edge 3,4 m Njdpfx Aod S S E Usqvjlb Height upper edge 3,7 m Load 500 kg/m² C-profiles and sigma-profile construction fixed with screws and nut Grid spacing adjustable in length floor structure is 38 mm chipboard, highly compressed, tongue and groove underside white, upper side grey coated Negotiated price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs are available on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, We offer as a set an almost new VEMAG Robot 500 meat processing machine, year of manufacture 2019, along with a Tippertie KDCMA 90 clipping machine, year of manufacture 2020. Manufacturers: VEMAG and TIPPERTIE TECHNOPACK Models: Robot 500 and KDCMA 90 Total price: €45,000 + tax Nlodpfsy Skw Djx Aqveb If you have any questions or need further information, please contact us by message or phone.

Condition: used, mileage: 34,800 km, power: 110 kW (149.56 HP), first registration: 06/2017, fuel type: diesel, overall weight: 5,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,219 mm, total width: 2,310 mm, total height: 3,180 mm, loading space length: 5,205 mm, loading space width: 2,200 mm, loading space height: 2,240 mm, Equipment: central locking, tail-lift, Equipment: Dholandia tail lift 1500 KG * Power steering * Partition wall * Central locking Nedsy N Hq Ujpfx Aqvolb * Twin tyres * Side door on the right * Tachograph * Trailer coupling, towable load 3500 KG Air conditioning: No air conditioning or climate control The vehicle has the following internal dimensions: L 5.20 m, W 2.20 m, H 2.24 m Payload: 1900 KG The vehicle is in very good condition! Only 35,000 km original mileage! New TÜV + AU available for an additional cost Financing possible via Santander Bank

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer with Brushless cutting system for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 500 is a high-speed optimizer able to meet the highest production capacities with utmost reliability. EXTREMELY ROBUST Nljdpfx Asfhdvreqvjb Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed of a computer connected in real time to a last generation numeric control. Software S4U running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. Macro Excel included. FAST Innovative cutting system, it is so fast as to make the blade almost invisible to the human eye. Fast and full optimization maintaining a notable compactness of the machine. Feeding system with Brushless servo driven 18 Nm motor. Cutting system with Brushless servo driven 28 Nm motor. Power motor blade HP=7,5 (5,5 kW) Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.