Used Nissan Yg 1 D 2 A 32 Q for sale (1,25,461)

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Djdpfx Apstwqzlo Deku

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, TECHNICAL DETAILS Dksdpfoyx S Sijx Ap Dju Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Overall height: 3,100 mm Fork dimensions: 1,190 mm x 1,100 mm Minimum fork width: 250 mm MACHINE DETAILS Mast: Triplex Fuel type: LPG Dimensions (L x W x H): 2,830 mm x 1,240 mm x 3,110 mm Number of wheels: 4 Engine brand: Nissan Operating hours: 7,720 h EQUIPMENT Side shift Work lights Half cabin Free lift

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Dsdpfx Apougpwnj Doku Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, machine/vehicle number: MAC112-76348, overall weight: 50 kg, Rexroth Indramat Dkodpsx H I Tfsfx Ap Dou MAC112C-1-KD-2-C/130-A-1/S005 Servo motor / permanent magnet motor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° Dedpoyk Empefx Ap Doku 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/1992, total length: 7,800 mm, total width: 2,500 mm, suspension: air, tire size: 265/70-R19.5, wheelbase: 3,100 mm, Year of construction: 1992, Very nice 1992 LAG 2-axle BALLAST trailer with SAF axles and drum brakes, loading area dimensions: 495 x 250 cm, loading area height: approx. 107 cm, dual tires at the rear with 265/70-R19.5 tires (tread depth left: 6/8, 9/8 mm; tread depth right: 7/10, 12/12 mm), unladen weight: 4,010 kg, permissible total weight: 20,000 kg, Dutch registration with a valid periodic technical inspection (APK) until 02.12.2026 = Further information = Axle configuration Tire size: 265/70-R19.5 Axle brand: SAF DRUM Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 50%; Tire tread depth left outside: 40%; Tire tread depth right inside: 60%; Tire tread depth right outside: 45% Rear axle: Dual tires; Max. axle load: 10,000 kg; Tire tread depth left inside: 50%; Tire tread depth left outside: 55%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75% Weights Unladen weight: 4,010 kg Payload: 15,990 kg GVWR: 20,000 kg Maintenance, history and condition APK (Periodic Technical Inspection): valid until 12/2026 Technical condition: very good Optical condition: very good Djdpfxez Nl T Re Ap Doku Identification License plate: WJ-62-BZ Further information Please contact Arne Honingh for more information.

Condition: good (used), Whitworth thread tap Dkjdpfxsdx Ug Es Ap Dsu Manufacturer: Reishauer Whitworth 1 1/2 inch, 601 D Rapid

Condition: used, power capacity 38 Nm volt 0 V ampere 42 A Dkedpfjytg Tisx Ap Dou weight of the machine ca. 59 Kg

Condition: used, mileage: 54,258 km, power: 81 kW (110.13 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,020 kg, color: grey, gearing type: mechanical, number of seats: 9, Maximum permissible total weight: 3020 kg. Dkjdpezgyw Tjfx Ap Dju

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) Djdpfx Apeyc T Ape Dsku The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm Dodpfx Asz I Eggop Deku everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-1 permanent magnet motor, serial number MAC090-93888, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Dodpfelntwqex Ap Dsku

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Dkedpfxstwqtbs Ap Dju Pressure: 2…8 bar. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Festo DGC-32-3600-KF-PPV-A Linear actuator. Two units in stock, price is for one pc only. Good working condition. Dkjdpfstwqt Isx Ap Deu Please check out our other listings as well.

Condition: ready for operation (used), Rexroth MAC112A-0-VD-2-C/130-A-1 3-phase permanent magnet motor MNR: R911224444 SN:MAC112-A0256 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dkjdotz Idwopfx Ap Deu

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Equipment: ABS, BOBCAT E60 R2-SERIES – AIR CONDITIONING – 2 BUCKETS – FROM FIRST OWNER – READY FOR USE – 1,700 OPERATING HOURS – VEHICLE HISTORY * GERMAN VEHICLE Dkodpfx Asz Emumep Deu * VIDEO AVAILABLE UPON REQUEST * FROM FIRST OWNER VEHICLE EQUIPMENT * TYPE: E60 R2-SERIES * AIR CONDITIONING * 2 BUCKETS * 1,700 OPERATING HOURS * 5,685 KG * 41 KW * IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 ----EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) – 5 DAYS, 30 DAYS REGISTRATION, AND 17–21 DAYS AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors, and prior sale! You can find more vehicles on our website: Sales are exclusively based on our general terms and conditions – see our website. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), Indramat MAC114C-0-MD-2-C/130-A-1 Permanent Magnet Motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Dedpfxei D Irds Ap Dsku

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 Permanent Magnet Motor, Serial No.: MAC090-80045, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dsdpjy T Unpjfx Ap Doku

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 three-phase AC servomotor, serial number: 42433, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpfx Apey T Unij Deku

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m Djdpeydv I Dofx Ap Deku • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Dksdpez I Az Ujfx Ap Deu Weight: approx 3,2 T

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Dkedpjq R N Tmsfx Ap Dju Stepless control with inverter and radio with belly console optionally available!

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 1,54,314 cm³, injection pressure: 2,50,01,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Dksdpexl Hi Tefx Ap Dou terms of payment: 100% prior to delivery

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 -Quantity: 2x amplifiers available -Price per piece Dkedjn Hbcyjpfx Ap Dou -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Dodpfx Apjqvnl Ts Dsku