Used Ott K 14 U 206 for sale (67,348)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) Hjdszg Dx Uopfx Ah Sont - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  - Capacity: - 2,500 bph - Formats: - Prepared for 0.33 L Longneck - Filling temperature: - 6°C - Overhaul & refurbishment details - General overhaul in 2016: - Pre-evacuation - New rotary ball connection - New stainless-steel table - New electrics - New valve control cabinet in stainless-steel design Hjdpfx Ajyb Sdvjh Ssnt - 0.33 L guiding set - Sihi vacuum pump - Renewed in 2023: - Seals on lifting cylinders and filling valves - Vacuum and overpressure valves equipped with new seals and springs

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS Hodpfx Ajv I Saysh Sjnt GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Hnedpfxowx Rrnj Ah Set Heating-up time approx. 20 min. Price ex works.

Condition: good (used), Year of construction: 2010, operating hours: 1,387 h, fuel type: electric, Year of manufacture: 2010 Drive: Wheel GVW: 3.170 kg Dimensions (LxBxH): 249 x 120 x 250 cm Lifting capacity: 350 kg Working height: 1.380 cm Technical condition: good Visual appearance: good Please contact Ton for more information Manufacturer: Haulotte Type: Compact 14 Year of manufacturing: 2010 Weight: 3.170 KG Hourmeter: 1387 Drive: Elektrisch Product number: 25012 Platform height: 11,80 meter Working height: 13,80 meter Platform measurements: 231x120 cm Extendable platform: 92 cm Total measurements LxWxH: 249x120x250 cm Max. platform load: 350 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 5.500,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Hnjdey S Ukbspfx Ah Sjt Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer Hnedpfx Asv Tzhqjh Sjt • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: good (used), Year of construction: 2002, Edge banding machine with joiner milling cutter. Otherwise, fully equipped. PU adhesive can be used. Hsdpfsgmn H Asx Ah Ssnt

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 01305-1, type of input current: three-phase, cooling capacity: 6 kW (8.16 HP), Manufacturer: Seydelmann Model: WD 114 Machine no.: 01305-1 Type: Industrial meat grinder Hedpfjzxf Izox Ah Sjnt Robust and professional Seydelmann WD 114 meat grinder, suitable for grinding and processing meat in butcher shops and industrial meat processing companies. The machine is largely made of stainless steel and is known for its solid construction, high reliability, and hygienic design. Technical specifications: Cutting plate diameter: 114 mm Hopper capacity: approx. 60 liters Capacity: up to approx. 1,000 kg/hour, depending on product, cutting plate, and application Motor power: approx. 6 kW 2 speeds on the feed screw Stainless steel feed screw Stainless steel worm housing Stainless steel locking nut Robust industrial construction Hygienic and easy to clean Suitable for professional and industrial use The Seydelmann WD 114 is a compact yet powerful machine and is particularly suitable for companies looking for a reliable, professional meat grinder with a high processing capacity.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 9972, total length: 4,500 mm, total width: 2,000 mm, type of input current: three-phase, year of last overhaul: 2020, empty load weight: 3,000 kg, Equipment: documentation/manual, The machine was last overhauled in 2020 at a cost of over EUR 70,000!\n\nMACHINE DETAILS\n\nType of incoming power: Three-phase current\nCompressed air connection: 6 bar\nInput frequency: 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 4,500 x 2,000 x 2,200 mm\nTotal weight: 3,000 kg\n\nEQUIPMENT\nDocumentation/Manual Hnsdpfxjxximhj Ah Set

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Hjdpewh R R Nefx Ah Sjnt

Condition: used, mileage: 20,000 km, power: 353 kW (479.95 HP), first registration: 11/2025, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #568 Mercedes Benz Arocs 2548 6x2 L with KROLL High-Pressure Flushing and Suction Pressure Tank Superstructure ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2548 6x2 L is equipped with a premium KROLL high-pressure flushing and suction pressure tank superstructure of ADR class L4BH. Featuring a telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and full CAN-BUS control, the vehicle delivers maximum performance for sewer, industrial, and hazardous goods operations. Body * KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm Hodpfex Egyfsx Ah Ssnt * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Sliding piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open water possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR – type class AT/FL L4BH * DISCHARGE: via pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for returning dirty water via the boom into the sewer * Manhole DN500 Chassis – Mercedes Benz Arocs 2548 L * 6x2 * Automatic transmission * 480 hp / 350 kW * EURO 6e * Fuel volume approx. 350 l * Cab color MB9147 Arctic White * 2x LED beacon lights on cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch from PTO * Approx. 20 m HP hose DN 125 * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Additional suction hose reel with through-suction, rear right, approx. 30 m DN75 suction hose High-pressure system * Uraca KD 718 G60 approx. 315 l/min at 170 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch * Approx. 240 m HP hose DN 25 * Large HP hose reel for 240 m 1" DN 25, 180° swiveling * Fitted with 160 m DN25 (rubber hose) * Small HP hose reel for 60 m ?? DN 13, hydraulic * Fitted with 60 m DN13 (rubber hose) Features of the hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Boom arm for suction hose hydraulically adjustable, telescopic, and swiveling 180° * ADR version L4BH type class FL including EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED perimeter lighting * Remote control of work functions via CAN-BUS technology * Remote control with 14 functions * Hand wash unit (warm) * Rear view camera * Acoustic enclosure in front of pump compartment * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising boards left and right * Scrap box Technical Data GVW 26,000 KG * Unladen weight approx. 18,760 KG * Length approx. 9,280 mm * Height approx. 3,820 mm * Width approx. 2,550 mm * Wheelbase 3,900 mm Conclusion An excellently equipped Mercedes-Benz Arocs 2548 with KROLL combination superstructure, telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and ADR L4BH. The ideal solution for sewer service contractors, industry, municipalities, and service providers seeking a powerful, ready-to-use professional vehicle. For further d

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Hedpfxskn Rz He Ah Sont Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Hnsdpsx Uru Nofx Ah Sst stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure Hjdoyrhtzepfx Ah Sont automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Hsdeq Nn Hcspfx Ah Sent PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: good (used), Year of construction: 2014, operating hours: 14,155 h, functionality: fully functional, machine/vehicle number: 668648, overall weight: 1,214 kg, load capacity: 210 kg, arm reach: 3,300 mm, This is a KUKA KR 210 R3300 K ultra industrial robot with a KRC4 controller, manufactured in 2014. We would be happy to offer you this robot as a fully refurbished unit! Hnodpfx Ahezgxdls Sot The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Soundproof enclosure CE-compliant design Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION available ex-stock Lieboch Hnjdpfx Ahjy Rm Iij Sot

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Verticale glass grinding line for max. glass sizes : 1500 x 3300 mm Hnsdpfszvw Iuox Ah Set 2 vertical glass grinding machines Bottero 111 F + Kuka robot + vertical glass wasching machine Bottero min. glass size : 200 x 300 mm

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Dimensions (L x W x H): 2590 x 1330 x 1950 mm Hjdpekkflbofx Ah Sent Weight: approximately 2800 kg Press stroke: 380 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: SM240101, type of input current: three-phase, total width: 3,500 mm, total length: 14,000 mm, input voltage: 380 V, power of the servo motor: 15,500 W, overall weight: 7,000 kg, cutting length (max.): 1,650 mm, For sale: practically new, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 model in excellent condition, ideal for high-demand packaging. Hnedpfx Ahjzil Nyo Sjt Type: Automatic Folder Gluer, Bottom Locking Type Year: 2024 Effective Width: 1650 mm Power: 15.5 kW Condition: Excellent, like new. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME,manufactured in 2021 are also available for sale.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Hnedszz Sd Uopfx Ah Sjt Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: used, mileage: 4,08,500 km, power: 184 kW (250.17 HP), first registration: 12/2014, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2014, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1200 * MAN Midi A 66 / * Class: M3 / Class I according to 2001 / 85/ EC? S.1 * HOC * First registration: 12 / 2014 -> Model year 2015 * 184 kW / 6,871 cc * Retarder * EURO 6 * AIR CONDITIONING SYSTEM * Auxiliary heater * CONVECTOR HEATING * 31+2+1 seats - total 34 seats * Wheelchair spaces * 3-POINT SEAT BELTS ON EVERY SEAT!! * Quick-release seats in the KIWA wheelchair space area! * 24 standing places * Max. speed: 90 km/h * Lawo matrix with control unit * Lifting / Lowering / Kneeling * Double glazing * Radio * Driver's cabin * Length: 9,775 mm * Width: 2,380 mm * Height: 3,125 mm * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / Mileage and condition may vary * All information is without guarantee Hedpjzvkbnofx Ah Sent * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: excellent (used), Shelf length: 225 cm Shelf width: 135 cm Hnsdpfx Ahozvnq He Sjt Maximum heating element height: 40 cm Maximum temperature: 120 °C Total power consumption: 14 kW

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. Hnjdpsyvwbwsfx Ah Set 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: used, Year of construction: 2002, gebraucht 2002 4543 prompt, Zwischenverkauf v Spanien 11400 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1700 mm 1500 mm 1960 mm 950 kg 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Hodpfxjyrhn Eo Ah Sjnt Details: