Used Romer Powdercoating Oven for sale (1,184)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ Dcodpsflk Awefx Aptjl 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Dcodpfx Apofzb Nbetol ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Dsdpfjfz Anpox Aptocl 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2024, condition: new, functionality: fully functional, Forced-air curing oven Powder coating oven NEW SLS-90/O * D+t Through-feed oven, divisible Working dimensions: 1400 width x 2000 height x 6500 depth Overall dimensions: 1920 width x 2810 height x 6800 depth Power supply: Electric Rated power: 90 kW Voltage: 380V Frequency: 50-60Hz Door type: 2 doors on each side - through-feed oven Anti-explosion lock Warm-up time: 15-30 min. (180 °C) Homogeneity: < ± 3 °C at 180 °C Max: < ± 3 °C Maximum temperature: 230 °C Transport: optional Air circulation: Forced air Heaters: Interchangeable roof heating panels Airflow: Vertical Fan: Radially mounted on interchangeable panels Door: Double, two doors on two sides (through-feed oven) Divisible Motor power: 1.1 kW Capacity: 6480 L Warranty: 12 months GERMAN-SPEAKING CONTACT PERSONS IN GERMANY FEEL FREE TO INQUIRE Delivery time: approx. 12 to 16 weeks after order Shipping costs are calculated individually. We also offer systems tailored to your requirements. More information at Romer Germany Powder coating, electrostatic painting, Powder Coating, Powder painting, plastic powder, Peinture en poudre, thermoplastic, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування, powder coating booth powder coating system Dcedpfxocutrlo Aptel powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder coating oven industrial oven INDUSTRIAL OVEN, forced-air curing oven, powder coating oven

Condition: new, Year of construction: 2026, functionality: fully functional, Specifically designed for small businesses and wheel coating operations. Complete system consisting of: Powder curing oven, dimensions: width x height x depth 1200 x 1600 x 1200 mm, 15 kW Powder coating booth, dimensions: width x height x depth 2000 x 2240 x 920 mm Latest powder spray gun from the ROMER ProfiSpray series Dcjdog Ngt Njpfx Aptsl All together for 17,990.00 net, plus shipping and installation.

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 Dcodpfx Apszx S Emotjl EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Dedpfszylxcjx Aptjcl

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 Dedpfx Asy Ta A Eoptscl * Ideal for quality assurance, reverse engineering, tool and mold making Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Subject to prior sale and errors excepted.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009703, functionality: fully functional, Completely overhauled, delivery time 3-4 weeks Chamber oven for solvent-containing materials, compliant with DIN 1539 - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Max. temperature: 250°C - Controller: JUMO Imago 500 - Approved solvent quantity at max. temperature: 250 g / 46 g - Exhaust air flow rate: 6 m³/min - Additional equipment: 1 feedthrough, e.g. for thermocouples 3 heavy-duty grid shelves - Connection power: 26 kW Dedpfxozy Ihge Aptecl - Weight: 1250 kg - Includes documentation, CE declaration - Current DGUV test report Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, tempering oven, paint drying oven, solvent oven.

Condition: good (used), Revent Single Rack Oven Dedpfx Apsyw T D Djtjcl Rotary Rack Oven Complete with one mobile oven rack In good working condition

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Dcsdpsfz Dt Nefx Aptjl - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Dcsdpfx Apjfz Dubjtsl The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Dcedpfx Apsfz I Edotol Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, functionality: fully functional, Procure 750 UV Oven made by 3D Systems Used but in full working order. 1 owner from new. Dcsdpfx Apszxaafotol Machine in my warehouse in UK. Can put on pallet ready to load. Contact me for more info.

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. Dedpfxozq Ax Uo Aptscl If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Glass laminating oven with vacuum mat (bag oven), manufacturer SIMTECH (Belgium), Flexlam series – Glass Laminating Solutions. Manufacturer: SIMTECH (Belgium) Model: Flexlam Laminating Oven Electrical panel: Alfametal / Dynamics, Project No. 0467 Year of manufacture: December 2007 Power supply: 3 x 400V AC + PE, 50Hz Network: TN-S, Icc < 10kA Control panel: Allen-Bradley PanelView 300 Micro Dodpfx Apjzqmhaotscl Controls: Cycle Start/Stop, Vacuum Start, Reset, Emergency Stop Vacuum system: Dedicated vacuum pump, vacuum mat/bag Signaling: Signal tower (End of Cycle / Alarm-Fault / In Process)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Dcedpsfz Nb Tjfx Aptsl Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Dcjdpfeflmdwex Aptsl - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, number of chambers: 2, fuel type: gas, year of last overhaul: 2026, Equipment: CE marking, We offer this Termopan TPD-123 baking oven in very good condition, manufactured in 2014. Manufacturing number: 078/14 Model: TPD-123 Control panel contract number: 66203-7 Voltage: 400 V Frequency: 50 Hz Power: 6 kW Phases: 3 Dsdpfxozmykgs Aptscl Fuel: Gas The oven is a double-chamber oven with two baking chambers and a single Weishaupt burner. The two chambers can be used simultaneously or independently, depending on the requirements, making it suitable for high-capacity production of bakery and pastry products. The offer also includes 3 tray trolleys. The trolley is designed for 60x80 or 60x40 cm trays, with two trays per row. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, machine/vehicle number: Krāsns Unox XEBC-04EU-E1RM ar raudzētava XEBPC-08EU-V, functionality: fully functional, operating hours: 5 h, Equipment: CE marking, documentation/manual, Unox XEBC-04EU-E1RM oven with XEBPC-08EU-V proofing cabinet. Dcsdpfx Apozwt U Tjtol

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control Dedev Rpx Sepfx Aptocl • BP-H2000 W900 part measuring system

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Dedpfx Apjfz U S Estscl - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 2009, 348 USED Heuft thermal oil ovens. Dcodpfozxp Dyox Aptjl Year of manufacture: 2009 EQUIPMENT: - 2 x Heuft trolley ovens for 60x100mm sheets, - 1 x 15 m² deck oven (the oven has a 3+3-deck temperature control), - HK 200 heating boiler, - trolleys. The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, fuel type: gas, MIWE Orbit rotary oven – sheet metal size 60 × 80 cm Oven without burner For sale: a MIWE Orbit rotary oven, designed for use with sheet metal measuring 60 × 80 cm. Oven dimensions: width: 1615 mm depth: 1500 mm height with hood: 2510 mm minimum required room height: 2620 mm Dodszvpbtjpfx Aptjcl Oven is in like-new condition.

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, temperature: 1,300 °C, number of chambers: 1, control type: PLC-controlled, fuel type: gas, Equipment: documentation/manual, No. 1 Industrial car furnace / USED, year 1999, for heat treatments on metals (tempering, annealing, normalizing, stress relieving, preheating, sintering), and for firing ceramics and porcelain. Type: STC2400 Maximum temperature: 1300°C No. 1 motorized car No. 1 flap door Thermal power: 240,000 kcal/h Power supply: 400 V 3-phase + neutral + ground, 50 Hz Control panel type: ATR 313 No. 1 heat exchanger made of stainless steel Dsdpfszxxm Rex Aptecl Machine sold as is, where is.