Used Rotary Current Transformer for sale (10,963)

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003585 - Manufacturer Code: 205367 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Djdpfsyrn Ufex Aptewb

Condition: used, functionality: unexamined, Ferwood Code: RU0009344 - Manufacturer Code: 4-008-26-0292 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dwjdpfx Aev Hrk Ajpteb

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Dwodpfx Apjzy Hw Hotjb Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Djdpfx Apozy Hgustjwb

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Dedpfxezwfbxe Aptowb Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 650 mm Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Dwedjzv S A Tspfx Aptjb Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Dodpfx Ajgvkiksptswb - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Dedpfx Apogvkk Netjwb Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Dwodpsh Evt Usfx Aptjb The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Dsdpfxsgvkgto Aptowb Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included Djdpfx Apjgvkktstowb - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Dodpfxjzynw Uj Aptjwb Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: Dwedpfxsw U U R Eo Aptjb - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. Dwedpfexabl Ssx Aptob range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. Dwjdpexabm Njfx Apteb - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min Dwjdpfx Asxaatnepteb bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of Dodpfxoxaafqj Aptjwb 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Dodpfx Apoxaac Astowb Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters Dwedpfxoixt H Ns Aptob

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Dwodpfehun Tzjx Aptjb Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 New / Ready for Use 1. Blade 43x43x20 2pcs (KR) 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) We manufacture replacement blades and spare parts for crushers and shredders. Dwodpfx Asxn Nyasptob Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blade Dedpoxn Nvhofx Aptewb Model: LINDNER Type: ANTARES Year of Manufacture: 2025 New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering. Dwjdjxw Nrbjpfx Aptjb

Condition: good (used), Horizontal-vertical rotary table with direct indexing Table diameter: 320 mm Mount: MK 3 Center height: 250 mm Table height, horizontal: 140 mm Weight, rotary table: approx. 70 kg Weight, tailstock: approx. 20 kg Accessories / Special features: Dodozyyx Rspfx Aptowb • Horizontal and vertical • Indexing possible via scale drum and additionally via 24-point direct indexing of 15° • Swiveling indexing worm for quick rotation • Tailstock Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D – 44143 Dortmund - Wambel / Germany

Year of construction: 2026, operating hours: 3 h, condition: new, WPS-1000 Eddy Current Separator with Magnetic Separator and Vibrating Table We offer a complete set for the separation of ferrous and non-ferrous metals from bulk materials, designed for professional installations and recycling lines. The set consists of: WPS-1000 eddy current separator, vibrating table, belt-type magnetic separator with a magnetic drum. The system enables uniform material feeding, removal of ferrous metals, and subsequent separation of non-ferrous metals, such as aluminum, copper, and brass. WPS-1000 Eddy Current Separator Dedpfx Apozzn Aastjwb The separator is designed for the automatic separation of non-ferrous metals from a material stream transported on a belt. A high-speed rotor equipped with NdFeB magnets generates a variable magnetic field. The eddy currents generated in the non-ferrous metals cause them to be rejected from their natural trajectory, separating them from the remaining material. Technical data: magnetic rotor length: 1000 mm magnets: NdFeB rotor motor: 7.5 kW belt motor: 1.5 kW smooth rotor speed control smooth belt speed control PVC belt with sealing flange adjustable separation baffle enclosed construction control cabinet with IP55 safety system device color selectable Vibrating Table + Magnetic Separator The vibrating table is responsible for the uniform distribution of the material before further separation. Then, the material is fed onto a conveyor equipped with a powerful magnetic drum, which removes ferrous metals before the material is fed into the WPS-1000. Technical data: vibrating table width: approx. 1000 mm vibration drive: 2 × approx. 0.8 kW magnetic drum width: approx. 1100 mm magnetic strength: up to approx. 12,000 Gauss magnetic roller diameter: approx. 200 mm belt drive motor: approx. 1.1 kW reinforced PVC belt partially stainless steel construction Application The set can be used, among other things, for processing: mixed scrap, electrical and electronic waste, plastics containing metals, shredded cables and wires, fractions after shredding, other materials containing ferrous and non-ferrous metals. Separation process: vibrating table → separation of ferrous metals → eddy current separator → separation of non-ferrous metals. The devices can operate as a complete set or be integrated into an existing technological line.