second hand
Make Albert Wagner
for chips
Yovkc
Fast runner approx. 2800 rpm.
Motor 2.95 kW
Connection diameter 200 mm / 200 mm
Air output 3000 m³ / h
Steel impeller
Space requirement approx. 900 mm x 900 mm x 650 mm
Total connected load 2.95 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
Mfk73bwn
-Motor power: 15 kW
-Speed: 2930 rpm
-Total pressure: 400 da Pa
-Volume flow: 5000 m³/h
-Connection input: Ø 400 mm
-Connection output: 380 x 320 mm
-Dimensions: 920/760/H775 mm
-Weight: 216 kg
Dust suction hood 500/400 mm
Air consumption 10860 m³/h
Bqci8bbz9p
Motor output 18,5 kW
Dimensions (L/W/H) , mm
Weight 600 kg
Filter fan for extraction and filtration of industrial wood dust.
- producer - WETTER WETZIKON Switzerland;
- type - Turbo Filter 32;
Bjuykhlyaa
- number of cartridge filters - 32 pcs;
- radial fan;
- fan electric motor - 3-phase, 22 kW, 1465 rpm;
- suction pipe collar diameter - 500 mm;
- pressure pipe flange diameter - 200 mm;
- width - 127 cm;
- length - 410 cm;
- height - 230 cm;
- galvanized sheet construction;
- CE - does not have;
- DTR - does not have;
- device installed, ready for insp...
used fan
Year of construction: 2007
Condition: maintained
Ekegntp
Motor 5,5 kW 3000 rpm
volume flow 4400 m³/h
availability: short term
Location: Röllbach
Dust suction hood: mm
Air consumption: m³/h
Motor output: kW
volume flow ventilator - transport: m³/h
motor capacity: kW
revolution per minute: U/min
weight: ca. 35 kg
capacity in W: 1872 Watt
Brl7efrors
flow rate: 8,175 m³/h
max. temperature: 70° Grad
Voltage primary: 400 V
used, good condition
Make Nestro
Type 010320
Year of manufacture 1990
Nqf78ogf
Machine no. 108202
for chips
Fast runner approx. 2850 rpm.
3 kW motor
Connection diameter 200 mm
Pressure pa. 2000 m³ / h
Air output 3380 m³ / h
Steel impeller
Required space approx. 1100 mm x 700 mm x 600 mm
Total connected load 3.0 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Shaft ventilation device, centrifugal fan, dust extractor fan, fan, suction
-Connection: 12 volts
-Motor power: kW
-Speed: rpm
-Volume flow: m³/h
-Connection input: 100 mm
Ehcppdf
-Connection output: 100 mm
-Dimensions: 500/450/H370 mm
-Weight: 16 kg
Incoming diameter: 500 mm
Outbound diameter: 400 x 500 mm
Industrial suction fan is in working condition.
Gfyjzg9
:10.580 m³/h
:11 kW
Fq3nz0r
:1300x800x1150 mm
Technische Daten: - Saug- und Druckstutzen Durchmesser 450 mm
- max. Volumenstrom 15000 m3/h
- zug. Unterdruck 1800 Pa
- Motorleistung 22,0 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
- inklusive Schwingungselemente
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=1410, B=1130, H=1295 mm
- Gewicht 500 kg
Gv7pms
Dust suction hood: mm
Brl7g2mbf2
Air consumption: m³/h
Motor output: kW
volume flow ventilator - transport: m³/h
motor capacity: kW
temperature range: -35 / +60° °C
Voltage primary: 400 V
weight: 40 kg
capacity in W: 4,1 Watt
used, good condition
manufactured by Höcker Polytechnik
Lnee0jhf
type S 250
built in 1991
Masch.-No. 69700
high speed ca. 2800 rpm
motor 5,5 kW
connection diameter 250 mm
air capacity 5080 m³/h
required space ca. 800 mm x 800 mm x 1000 mm
total connected power 5,5 kW
located in 97447 Gerolzhofen, free on truck, unverpackt
sale in current condition as seen,
without revision,
without guarantee and Gewährleistung
Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor
-Motor power: 0.37 kW
-Speed: 2800 rpm
-Max. Volume flow: - m³/h
-Max. Pressure: - kp/m²
-Connection input: Ø 115 mm
-Connection output: Ø 115 mm
-Impeller: Ø 300 mm
-Connection: 400 volts
Fvtwkgey0
-Dimensions: 400/600/H450 mm
-Weight: 21 kg
The industrial suction fan is in working position.
Bt7xlonnk3
Motor: 5,5 kW
pipe connection: 250 mm
2800 rpm
Air capacity 5600 m³/h
Steel impeller
Jwttqm
Technische Daten: - Saug- und Druckstutzen Durchmesser 500 mm
Nuzir
- max. Volumenstrom 20000 m3/h
- zug. Unterdruck 1800 Pa
- Motorleistung 30,0 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
- inklusive Schwingungselemente
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=1510, B=1250, H=1400 mm
- Gewicht 600 kg
Axial fans for the Railway technology
Bsl0wbpcjl
used, good condition
Made by Höcker Polytechnik
Type S220
Year of construction 1993
Machine no. 138222
for chips
Fast runner approx. 2800 rpm.
Guuxkwb
4 kW motor
Connection diameter 220 mm
Pressure pa. 2100 m³ / h
Air output 3950 m³ / h
Space requirement approx. 700 mm x 800 mm x 700 mm
Total connected load 4.0 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Centrifugal fan, dust extraction fan, fan, suction, dust blower, welding fume extraction
Bfpklnqy
-Motor power: 0.75 kW
-Speed: 2800 rpm
-max. volume flow: - m³/h
-max. pressure: - kp/m²
-Connection input: Ø 150 mm
-Connection outlet: Ø 150 mm
-impeller: Ø 300 mm
-connection: 230 volt
-Dimensions: 550/400/H730 mm
-Weight: 34 kg
Diameter: 710 mm
Cyzqyeo8
Electric motor: 680 W
Wings: 3
Industrial suction fans in working condition.
Motor: 5,5 kW
pipe connection: 250 mm
2920 rpm
Air performance: 5600 m³/h
Bt2hwyf29u
Technische Daten: - Saug- und Druckstutzen Durchmesser 400 mm
- max. Volumenstrom 12500 m3/h
- zug. Unterdruck 2000 Pa
- Motorleistung 18,5 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
- inklusive Schwingungselemente
Zl8goeu
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=910, B=1200, H=850 mm
- Gewicht 400 kg
Dust suction hood: mm
Air consumption: m³/h
Motor output: kW
volume flow ventilator - transport: m³/h
motor capacity: 0,77 kW
revolution per minute: 2690 U/min
HIGH-PRESSURE TUBE VALVE FAN for dust-laden air mixture, low humidity air
made of stable 1.0 sheet steel
2 x available
Fan no. 1:
Size: L: 365 x W: 345 x H: 545mm
screwed to exhaust air funnel Ø 280 x Ø 200 x 240mm (slightly deformed)
Fan number two:
Bjvyxlhsmy
Size: L: 365 x W: 345 x H: 300mm
further details:
-flange mounted on both s...
with control cabinet
used, great condition, little run
Schuko make
Type K 300
Year of manufacture 1999
Machine no. 058900
7.5 kW motor
Connection diameter 300 mm
Pressure pa. 2800 m³ / h
Air throughput 5190 m³ / h
Steel impeller
Belt drive
control
Vibration damper
Required space approx. 1700 mm x 1400 mm x 1600 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
Cqhz7wwse
without overhaul,
without guarantee and warranty
Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor
-Motor power: 0.65 kW
-Speed: 2840 rpm
-max. volume flow: 0.41 m³/h
-max. pressure: 804 kp/m²
-Connection input: Ø 65 mm
-Connection output: Ø 62 mm
-Impeller: Ø - mm
Vrevqu
-Connection: 400 volts
-Dimensions: 580/540/H450 mm
-Weight: 30 kg
:12300 m³/h
:22 kW
:2000x1200x2000 mm
Btcdlcvluu
Motor: 5,5 kW
Bt2hqp7f09
pipe connection: 300 mm
1450 rpm
Steel impeller
Technische Daten: - Saug- und Druckstutzen Durchmesser 355 mm
Bhhfm72fax
- max. Volumenstrom 8000 m3/h
- zug. Unterdruck 2500 Pa
- Motorleistung 11,0 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
- inklusive Schwingungselemente
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=880, B=1037, H=820 mm
- Gewicht 320 kg
Motor 11 kW
Ein- und Außblasseite 300 mm
Djl3k3r
Lagerort: Nattheim
used, good condition
manufactured by Luftus
type LRM - WTS
built in 1995
Masch.-No. 950071
for chips
low speed ca. 1400 rpm
motor 7,5 kW
connection diameter 300 mm
pressing pa. 2000 m³/h
Btwvfg7
air capacity 6000 m³/h
steel wheel
required space ca. 1200 x 800 x 1200 mm
weight ca. 250 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
-Motor power: 4 kW
08wk7guxq
-Speed: 2850 rpm
-Max. Volume flow: 7200 m³/h
-Max. Pressure: 120 kp/ m²
-Connection input: Ø 450 mm
-Connection output: 400 x 400 mm
-Impeller Ø: - mm
-Dimensions: 1030/930/H1240 mm
-Weight: 222 kg
used fan
Year of manufacture: 1992
suction nozzle diameter 300 mm
motor 7,5 kW
with V-belt drive
Jvylri
with steel impeller
7350 m³/h
2200 pa
Availability: short term
location: Hochheim
:12300 m³/h
Ylggb9g
:22 kW
:2000x1200x2000 mm
Technische Daten: - Saug- und Druckstutzen Durchmesser 250 mm
- max. Volumenstrom 4000 m3/h
Bhhfnhmkuy
- Motorleistung 4,0 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
- inklusive Schwingungselemente
- Abmessungen L=700, B=650, H=850 mm
- Gewicht 70 kg
Schuko fan L350
used, good condition
nominal volume flow 9500m€/h
YEAR: 1994
dimensions approx. L 1000 mm x W 850 mm x H 1650 mm
motor 11 kW / 400V
Glaqb2equ
exhaust nozzle NW 350 mm
Rubber feet
Location Dortmund
used, top condition
manufactured by Schuko
type L 450
built in 1996
masch.-No. 036774
for chips
low speed ca. 1400 rpm
motor 15 kW
connection diameter 450 mm
pressing pa. 1980
air capacity 14.880 m³/h
steel wheel
vibration damper
original price ca. 7.000 EUR
required space ca. l x w x h mm
Ok7dz
1600 x 1200 x 1200
located in 97447 Gerolzhofen
sale in current condition
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
3ygxsx9s2
-Centrifugal fan: soundproofing in a galvanized housing
-Manufacturer: Rippert
-Type: HL80-450-A
-Motor power: 18 kW
-Speed: 1826 rpm
-Volume flow: 16,000 m³/h
-Total pressure: 3,150 Pa
-Connection input: Ø 520 mm
-Connection output: 495 x 435 mm
-Dimensions: 2340/1520/H1520 mm
-Weight: 1080 kg
Volumenstrom : 7726 m³/h
Motorleistung : 11.0 kW
Gehäuseposition : GL 90/6 (von Antrieb oben nach links)
Motorenart : S=Schnelläufer
Laufrad : Offen
Btutyk8yao
Material der Flügel : Stahl
Gewicht ca. : 150 kg
Stromanschluss ca. : 11.0 kW
Lagerort: Nattheim
used fan
Year of construction: 1992
Condition: age-appropriate
Engine 30,7 kW
V 21246 m³/h
2704 Pa
1660 1/min
Availability: short term
Location: Röllbach
Ibwur2fpe
Technische Daten: - Saug- und Druckstutzen Durchmesser 355 mm
- max. Volumenstrom 10000 m3/h
- zug. Unterdruck 1800 Pa
- Motorleistung 15,0 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
- grundiert und lackiert
C2apxu9mw
- inklusive Schwingungselemente
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=890, B=1081, H=830 mm
- Gewicht 350 kg
Dust suction hood 400 mm
Air consumption 10500 m³/h
Motor output 15 kW
volume capacity 175 m³/min
engine AEG AM160 LV4
Exhaust air side: Rectangle 420 x 280 mm on round Ø 400 mm
Bjvwqnpxnk
The high-performance radial fan is used for dedusting, exhaust, etc. It is not suitable for material transport. Cover hood for belt drive is missing.
used, good condition
manufactured by Hering
for chips
motor 37 kW
connection diameter 700 mm
Fb9if2h
steel wheel
belt drive
vibration damper
original price ca. 12.000,00
required space ca. l x w x h mm
1700 x 2000 x 2500
located in 97447 Gerolzhofen
sale in current condition
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
-Centrifugal fan in a galvanized housing, soundproofing
-Manufacturer: Rippert
-Type: HL80-400-A
-Motor power: 11 kW
-Speed: 1724 rpm
-Volume flow: 10,000 m³/h
-Total pressure: 2,300 Pa
-Connection input: Ø 400 mm
-Connection output: 295 x 435 mm
-Dimensions: 2040/1290/H1520 mm
Mtt28o
-Weight: 836 kg
Fan JKF
Manufacturer JKF Industri Denmark
Fan JKF 30 kW, type 55KR
year of manufacture 2007
Hgrgmwv
1750 revolutions per minute
740 Kg
1 piece fan JKF 22 kW, type 45KR
year of construction 2001
2350 revolutions/minute
370 kg
1 piece fan JKF 18,5 kW, type 45KR
year of construction 2001
1850 revolutions/minute
335 Kg
used fan
Ysvqhk
Condition: normal
Motor 18.5 kW
Suction nozzle diameter 450 mm
V-belt drive
Availability: short term
Location: Röllbach
Technische Daten: - Saug- und Druckstutzen Durchmesser 300 mm
- max. Volumenstrom 6500 m3/h
- zug. Unterdruck 2500 Pa
- Motorleistung 7,5 KW / 400 V
- Drehzahl 3000 U/min.
- verstärkter Mantel und Stahlflügelrad
vorwärts gekrümmt direkt auf der Motorwelle
Bhhfnq7qiz
- grundiert und lackiert
- inklusive Schwingungselemente
- inklusive Schaltschrank mit Stern-Dreieck-Schalter
- Abmessungen L=800, B=847, H=790 mm
- Gewicht 250 kg
Motorenart : K=Keilriemenantrieb
Volumenstrom : 8120 m³/h
Material der Flügel : Stahl
Ansteuerung : ohne
Ausführung Ansaugstutzen : rund
Ausführung Stutzen Druckseitig : rund
Npakd
Abmessung : 1500x1200 mm
Motorleistung : 11 kW
Absaugdurchmesser : 300 mm
used
manufactured by Spänex
Ezbe7cj
type SP 12
for chips
high speed ca. 2800 rpm
motor 0.75 kW
connection diameter 120 mm
located in 97447 Gerolzhofen
Centrifugal fan, paint mist extraction fan, fan, extraction fan, blower
-Motor power: 1.1 kW
-Speed: 2760 rpm
-Max. Volume flow: approx. 1,900 m³/h
-Max. Pressure: - kp/m²
-Connection input: Ø 300 mm
-Connection output: Ø 300 mm
Q9wnkla
-Impeller: Ø 310 mm
-Connection: 400 volts
-Number: 3x available
-Price: per piece
-Dimensions: 900/630/H660 mm
-Weight: 64 kg
This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
