Used Sapi Gmbh Lackieranlage | Spritzlackieranlage for sale (69,637)

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Iedpfxsyn Rmie Aizoaw Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Iedjgth U Iopfx Aizoaw Electrical power: 220 V Drum diameter: 900mm Adjustable vibration

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Iaedpfx Ajh Dimnjizew Diameter: 900 mm

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar Iaedpfx Asiw Eafoizjw - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Iaodpfji D T Iyox Aizew

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Ijdpfoy Urtfox Aizsaw Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt Ijdpfjy Urpyox Aizeaw - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements Iasdpfx Aszmh R Ioizjw • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Iaedpfx Aszmhuyjizew Technical specifications: * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 * Sides: 4 mm, steel S355 Iaedpfszmhdhsx Aizew * All sheets and profiles welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm * Securing bar * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: KR 210 R2700 prime, Basic data KR 210 R2700 prime Number of axes: 6 Number of controlled axes: 6 Working envelope volume: 55 m³ Pose repeatability (ISO 9283): ± 0.06 mm Approximate weight: 1111 kg Iodeyl Ux Depfx Aizeaw Rated payload: 210 kg Maximum reach: 2696 mm Protection rating: IP65 Protection rating, in-line wrist: IP65 Noise level: < 75 dB (A) Mounting position: Floor Footprint: 830 mm x 830 mm Permissible angle of inclination: ≤ 5° Default color: Base frame black (RAL 9005); Moving parts KUKA orange 2567 Controller: KR C4 Transformation name KR C4: KR210R2700 PRIME C4 FLR Hollow shaft diameter: A1 139 mm (partially occupied by motor cables) Humidity class (EN 60204): - Environmental condition classification (EN 60721-3-3): 3K3 Ambient temperature: Operation: 10°C to 55°C (283 K to 328 K) Storage/transport: -40°C to 60°C (233 K to 333 K) Axis data, KR 210 R2700 prime Motion range: A1: ±185° A2: -140° / -5° A3: -120° / 155° A4: ±350° A5: ±122.5° A6: ±350° Speed with rated payload: A1: 105°/s A2: 107°/s A3: 114°/s A4: 136°/s A5: 129°/s A6: 206°/s Payloads, KR 210 R2700 prime Rated payload: 210 kg Rated mass moment of inertia: 105 kgm² Rated total load: - Rated supplementary load (base frame): - Maximum supplementary load (base frame): - Rated supplementary load (rotating column): - Maximum supplementary load (rotating column): 300 kg Rated supplementary load (link arm): - Maximum supplementary load (link arm): 130 kg Rated supplementary load (arm): 50 kg Maximum supplementary load (arm): 150 kg Nominal distance to load center of gravity: Lxy: 270 mm Lz: 240 mm Exceeding the specified payloads and supplementary loads will reduce the service life of the robot and can overload the motors and gears. It is recommended to always test your specific application with KUKA.Load. If any individual value is exceeded, please consult KUKA Roboter GmbH.

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Iaedpfx Ajzinxqsizow Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Iaodpozachcjfx Aizow Subject to change, errors and prior sale.

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Ijdpfxjzil S Io Aizeaw Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, input voltage: 400 V, Equipment: documentation/manual, We offer this used Alfred Gruber GmbH bottle filling machine, model ARFD 6/11, complete with rinser and RingBull Off capping system, manufactured in 2020. Manufacturer: Alfred Gruber GmbH Type: Bottle filling machine ARFD 6/11 Year of manufacture: 2020 Manufacturing number: 2020044 Order number: 5728 Capacity: 1100 bottles/h Capacity per bottle: 0.33 l Rated current: 16 A Rated voltage: 3×400 V/N/PE Frequency: 50 Hz 1 unit: Fully automatic bottle rinser integrated into the system Linear electro-pneumatic bottle rinser with 2x6 spray nozzles suitable for bottles Suitable for cylindrical bottles: Height: 170-300 mm Diameter: ø 58-90 mm 1 unit: Water filter system for bottle rinser 1.0μ and 0.45μ filters with housing 1 unit: Automatic bottle filling and 5-liter can filling machine with IDM, 6-position - Fully automatic filling process - Container maximum ø90mm, height 320 mm - Semi-automatic filling process - Container maximum ø175mm, height 350mm Iaedpfxezlymfs Aizew - Semi-automatic filling process for 2.0l siphon bottles with handle and 5.0l party keg cans (only every second station can be used) Capacity: 1,100-1,200 bottles/h (0.3l bottle) 1,000 bottles/h (0.5l bottle) 700 bottles/h (1.0l bottle) 1 unit: Spray tunnel For washing away beer residue from the containers 1 unit: Rotary table – infeed 1 unit: Fully automatic ring pull-off capping system integrated into the system Optional conversion to crown cap ø26 with sorting bowl at an extra cost of Euro 25,000 instead of the Ring Bull Off 1 unit: Conveyor belts Completely serviced and maintained, including a 6-month warranty and electrical components.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance Iaodpfx Aijwymlyszjw With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier Ijdpfxowcaqhe Aizjaw * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth Iasdpfx Aezmnp Reizsw - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm Ijdpfx Ajvuw R Roizoaw - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Isdpfx Aisxuvk Eszjaw The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) Iaedpfxsxqhnzs Aizjw - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Iaodjwxza Nspfx Aizsw Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Iaodpfx Ajzil R Reizsw Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 2018, Overview Iajdpeywn Svjfx Aizow These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  - Capacity: 10 hl each - Application: Beer fermentation - Configuration: 3 × iso fermenters  

Condition: used, Year of construction: 2004, Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: - Manufacturer: Dr. Datz Maschinenbau GmbH Iasdpfx Aeyb R Rneizew - Type: BVM 24R - Year of Manufacture: 2004 - Number of Capping Stations: 24 - Closure Type: Wire bail closures - Machine Direction: Left to right