Used Section Beding Machine With Hydraulic Feed Of Roll for sale (80,471)

Condition: new, Isitan Hydraulic 4-Roll Round Bending Machine 4R HMS 2050x200 2 Speeds Top and bottom rolls driven Hydraulic side roll adjustment 3 Digital displays Hydraulic folding bearing Hardened rolls Tapered bending device Separate control panel Useful length: 2050 mm Top roll diameter: 200 mm Side roll diameter: 180 mm Total motor power: 5.5 KW Working speed: 3 m/min. – 6 m/min. Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending performance data 10 mm at the smallest inner diameter of 1000 mm (5 x top roll) 8 mm at the smallest inner diameter of 300 mm (1.5 x top roll) Chsdpfx Ash Ar Duob Uea Edge bending performance data 8 mm at the smallest inner diameter of 1000 mm (5 x top roll) 6 mm at the smallest inner diameter of 300 mm (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 - ST 42 structural steel)

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 Chedsuzv Tzjpfx Ab Usa guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Technical specifications: Number of rollers: 3 Number of speeds: 4 Chsdpfxszikpfs Ab Uea Motor power: 0.75 kW Feed speeds: 3-23 m/min Roller size: 120x50 mm Power supply: 380 V

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Chodpfx Asx U Eiajb Uoa Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: refurbished (used), Year of construction: 2005, We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Csdpeq T Nvcofx Ab Usha Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base.

Year of construction: 2005, condition: like new (used), We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Chsdjmuzuaopfx Ab Uea Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Codpfx Ajxdmgvjb Ujha Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Chjdpfxow I Ilis Ab Usa Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting

Condition: used, Year of construction: 2003, Machine for producing square rolls, equipped with a soaking station and a station for coating with grains. Codpfxoy Uklas Ab Ueha • Soaking station • Station for coating with grains • Machine imported from Germany The machine is in good working order. We also have a wide selection of used bakery and confectionery equipment. Please contact us – communication is possible in English, German, and Russian.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Cjdoxghngjpfx Ab Uoha As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Codov Dm Epopfx Ab Ueha 230 Volt Power Supply Price € 3,950

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Cjdpfx Aszlaimeb Usha Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Codpfx Ajy Uiyvob Usha Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm Chedpexugf Hefx Ab Uja · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Cjdpfx Aboyyygko Ujha Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Codjwz Ukyepfx Ab Uoha Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Codpfozmtpvox Ab Usha Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System Cjdpfxjzrt Ivo Ab Ujha All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product. Csdjzrnxcepfx Ab Ueha

Condition: used, The machine has been used very little. Csdszrxaqopfx Ab Usha

Condition: used, Hydraulic pump: Cedpfx Aozry D Dob Ujha Technical data: - Oil capacity: 160 L, - Engine: EMOD Type 132S/2, 5.5 kW, - Engine: LS 160 L-4, 15 kW,

Condition: used, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. The gearbox allows for manual, infinitely variable adjustment of the feed or gearbox speed. Chodpfx Ajzrxuujb Uea Technical data: - Gear motor: 7.5 kW

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS Cedpfx Abjzqwf Ne Ueha

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 09/2028, working width: 250 mm, conveyor belt width: 250 mm, type of input current: three-phase, total width: 300 mm, total length: 450 mm, total height: 270 mm, NEW +++ NEW Croissant Sheeter, Winding Machine NEW +++ NEW TOP Model: Rondi Croissant Roller Stainless steel design Tabletop unit for the efficient production of croissants Easy to operate Csdpotpl Urofx Ab Ueha For unfilled croissants Output up to 700 pieces/hour Exclusively available from us, DGUV V3 electrically tested Connection: 400V, 16A-CEE plug Dimensions: 300 x 450 x 270 mm (W x D x H) NEW machine & SAB tested With warranty + spare parts service Options: Delivery service Leasing & rental service Conveyor table Maintenance contract Service package Spare parts box Many other bakery machines in stock!

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request - in checked conditions - machinevideo - ?v=k7pkBwo4qPw Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options Cjdpfox Sr Dfjx Ab Ueha - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)