Used Atlantic Atsl 3013 for sale (119)

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table Njdpex Ni D Rjfx Aqvect - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS Nodpfx Aqeww H Enevoct SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Powered backgauge up to: 1000 mm - Rear area secured with light barrier - Front squaring arm: 1000 mm - HSLX version features: - CNC control HACO SC 5 controller (sheet thickness input in mm) - Automatic cutting angle adjustment by sheet thickness - Cutting length limitation - Automatic positioning of the backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction - Option for powered backgauge adjustment via 2 push buttons - Drive: 400 V / 22 kW - Electric foot pedal - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm Njdpsx D Uzzjfx Aqvect - Weight: approx. 9000 kg - The machine has been welded in various places by the previous owner and has only been repainted on the front side.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW Nedex A Tpnspfx Aqvect - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Nodpofh Tmmsfx Aqvjct Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Nedjdx Rd Nspfx Aqvjct Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2026, 3050 mm Nsdpfxowp Tdus Aqvsct 13,0 mm 0,5-2,5 ° 1000 mm work height max. 900 mm

Year of construction: 2019, condition: used, Transnorm accumulation roller conveyor 24V 2520-1430-1333 RA1858 Make: Transnorm Running direction: both directions Roller width (RB): 1333 mm Nominal/outer width (NB): 1430 mm Length: 2520 mm Roller diameter: 50 mm Roller distance: 60 mm Motor Roller conveyors: SEW E19I 09107 24V Height frame: 10 mm including two controlers Total 4 stowage spaces Conveyor speed: freely adjustable up to 1,25m/s Optionally available: Supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Ncjdpsk Abh Eefx Aqvst We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2002, pressing force: 14 t, number of axes: 2, Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details. • Power: 15 kW • Voltage: 380 V • Serial number: 90 695 • Control: Conventional CNC/NC press brake • Condition: In working condition Ncedpfey Nc D Djx Aqvot Technical Specification Bending Length 3100 mm

Condition: new, functionality: fully functional, TECNOMAC PCO 3013 HOT HYDRAULIC PRESS BRAND NEW MACHINE – V380/50 – “CE” Table size: 3000 x 1300 mm Njdpoy Sm S Rjfx Aqvoct SOLID PERFORATED STEEL PLATENS Aluminium platen covering Platen heating with diathermic oil Oil boiler: 27 kW Number of pistons: 6 Ø 100 mm Total pressure: 120 TON

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES Nedpfoyz I Hnex Aqvjct – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Nsdpfx Aey Hkd Hjqvoct Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2013, Used Durma press brake Model: AD R 30135 Capacity: 3050 x 135 tons Euro / Amada clamping Akas Fiessler laser Ncjdpfsyzf T Esx Aqvjt Manual crowning Including tool set

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 3050 mm distance between columns 2600 mm stroke of upper beam 265 mm Ncodpfx Aeyyqkgsqvot throat 450 mm dayligth 530 mm working feed 10,0 mm/sec ajustment speed 160 mm/sec return speed 100 mm/sec Control CYBELEC ModEva 10S work height max. 900 mm table width 104 mm back stop - adjustable 800 mm oil volume 250 l total power requirement 18,5 kW weight 10900 kg range L-W-H 4250 x 1700 x 2850 mm from a maintenance workshop - good condition (!!) New price ~ 84.000 euros Furnishing: - with DELEM numerical CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - pivoting control, front right - controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA) - CNC electric backgauge (X axis) * Travel speed 500 mm/sec. - CNC electric height adjustment (R axis) * Travel speed 350 mm/sec. * Travel range 250 mm - 4x manually adjustable stop fingers - Back gauge with ball screw + linear guides - WILA CNC motorized table crowning - FIESSLER laser safety device at the front - Upper tool holder, with crowned upper wedge & quick-change adapter (Amada) - WILA matrix shoe - manual clamping - 2x front - movable - robust support arms * Mounted on a linear guide rail system - side protection - rear protection - Stress-relieved steel construction body = durable monobloc frame - free-moving footswitch - User manual + CE safety standards

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Robosoft, control rack from press brake HACO type PPES 30135 -Type: PC 10-39 -Power supply card: 338-0180V2 -CPU card: 338-0159V2 -Power supply card: 338-0200V3 -Individual components: see photos -Price/sale: complete -Dimensions: 315/215/H210 mm Ncsdjrd Admjpfx Aqvst -Weight: 5.1 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, Used 3 meter CNC press brake from Durma Model: AD R 30135 Capacity: 3100 x 135 tons Year of manufacture: 2013 Cybelec DNC 60 CNC control Akas Fiessler laser safety system Manual crowning Ncodpsyvgqmefx Aqvjt 1 set of tooling from 1 to 6 mm

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Nsdpfxsh Txlcs Aqvsct Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), mileage: 5,29,650 km, power: 315 kW (428.28 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, fuel tank capacity: 900 l, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,700 mm, total width: 2,600 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 1 m³, Year of construction: 2018, Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Ncodpfx Asy A Tgioqvst Axle configuration Maximum front axle load: 8,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 13,515 kg Payload: 13,485 kg Gross vehicle weight (GVW): 27,000 kg Maintenance, History and Condition APK (Periodic Technical Inspection): valid until 11/2026 Technical condition: very good Visual condition: very good Further Information Contact Maarten Busser or Niels Busser for more information.

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER Ncedpfx Ajn R Dihoqvot - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: ready for operation (used), Year of construction: 2006, This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, it's designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information. Additional equipment • Additional Tool Set: Sold separately Machine Benefits Technical Machine Benefits • Cnc operated axes: y1, y2, x, r (3-axis press brake) / manually operated axes: z1, z2 Ncjdeyaincopfx Aqvst • Bending length: 3050 mm / tonnage: 135 t

Condition: new, Year of construction: 2026, neu 2026 080186 prompt, Zwischenverkauf v Türkei 81476 € 1309.77 € 1 69300 € 135 to 3050 mm Y1 / Y2 / X und RAchse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 120 mm/s 500 mm 500 mm/s 350 mm/s Nedpfowirtnsx Aqvoct 250 mm 900 mm 150 l 15 kW 4250 mm 1700 mm 2850 mm 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: excellent (used), Bead Mill VMA Getzmann Dispermat SL50-C Power: 3 kW Speed range: 0-6000 rpm Ncsdpjx Rzxijfx Aqvot Milling chamber volume: 0.5 l Rod temperature sensor Very good condition, directly from production!!!

Condition: reconditioned (used), Size: max 460 x 350 mm, min 70 x 50 mm Speed: max 25 c/min Infeed height: 120 mm False opening: max 160 mm Speed: kW 7,5 kW Ncjdpfxod Nt E Do Aqvjt Weight: 2.500 kg (approx.) Length: 220 mm Width: 160 mm Height: 200 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 98300 € 1857.87 € 135 to 3050 mm Y1 / Y2 / X und R Achse 265 mm 2600 mm 410 mm 530 mm hydraulisch 200 mm/s 10 mm/s 200 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2x4 kW 4200 mm 1680 mm 2750 mm 9500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import Nsdpfxjwirr Re Aqvjct servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 114100 € 2156.49 € 135 to 3050 mm 4 320 mm 3340 mm 500 mm servomotorischer Riemenan 100 mm/s 10 mm/s 100 mm/s 650 mm 250 mm 4200 mm 2200 mm 2550 mm 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Njdpfxewirkye Aqvjct Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option