Pearl mill VMA Getzmann Dispermat SL50-C

Perlmühle VMA Getzmann Dispermat SL50-C

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Hjdpoxvrt Sjfx Achonr

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm Hjdpfsx Ac Rbsx Achonr ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Condition: used, Year of construction: 1996, machine/vehicle number: 960816, Used WAB Dyno-Mill model KD 6 (6) stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 6 litre and it rated max product pressure 2 bar at max temperature 80°C. Jacket rated max pressure 8 bar, min cooling water temperature -20°C. Shaft is equipped with (6) polyurethane griding discs and belt driven by EExe eII T3 el. motor 10 kW, 1465 rpm, 50 Hz. Agitator disc circumferential speed 10 m/s. Shaft sealed with double mechanical seal. Gap type of milling beads separation mechanism. Includes integrated contol panel and switchboard, carbon steel frame. Hsdpfxjun S S Ej Achjnr

Condition: good (used), functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Central drain at 500 mm Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm Hnodpfxou D Ihvo Acher and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: excellent (used), Perlmühle Drais PM 25 RL-V Previously used, protected design Grinding container, 26 liters Stirring motor power: 24 kW with feed pump Hsdpfsk D Agtsx Achsnr In very good condition, directly from production!!!

Condition: like new (used), pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 125 l, Homogenizer Mixer CML125 Hodpfeyf N H Ajx Achenr Key Data: • SYMEX CML125 • Working volume: 125 L • Anchor agitator with scrapers and flow breaker 19 ... 82 rpm • Homogenizer with reversible operation (homogenizing/pumping mode) 5 - 21 m/s • Circulation line • CIP (Cleaning in Place) • Lid hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but also suitable for cosmetics Media Supply: • Cooling water supply: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3 m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Power supply: 3x400V at 50Hz; 45.0 kVA / 45.0 kW • Steam: 6-8 bar, 45 kg/h The machine is factory-refurbished and can be inspected. We provide full “turnkey” project management, including on-site installation and commissioning at your facility.

Condition: like new (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, Homogenizer Mixer 60L with 50L Pre-mix Tank Key Data: • Becomix RW60 CD + 50L Pre-mix Tank • Working volume: 60L and 50L • Anchor agitator with scrapers and flow disruptor, 0.6 - 3.6 m/s • Homogenizer with reversible operation (homogenizing/pumping mode), 5 - 25 m/s • Recirculation piping • CIP (Clean-in-Place) • Lid hydraulically liftable • Control via 19" touch display • Heating, cooling, vacuum, etc. • New seals • Pharmaceutical specification, but also suitable for cosmetic applications Hnjdeyf N Hcspfx Acher The net footprint in the production area is approximately 2.5 x 2.3 meters. The energy rack is not included in this measurement. Utilities: • Cooling water supply: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3 m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Power supply: 3x400V at 50Hz; 45.0 kVA / 45.0 kW • Steam: 6-8 bar, 45 kg/h The machine is factory-refurbished and available for inspection. We handle your project as a turn-key solution, including on-site installation and commissioning.

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Hnodpfx Acsyba Szoher

Condition: excellent (used), Perlmühle COMEC M 8 Stainless steel Double-walled Container volume: 8 liters Hodoh Rakhopfx Achonr In very good, ready-to-use condition, directly from production!!!

Condition: reconditioned (used), Used ACM 15 for sale. Grinding tools are completely new. Bearings are completely new. Hodozat Iaspfx Achenr