Hydraulic plate shears

HACO HSLX 3013

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good/well-maintained condition (!!) Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device - Front finger guard Lhsdex Avq Ijpfx Adwjb - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication Lhsdpfx Aju Dm E Hodweb To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: Lhjdpfxsx A Tpnj Adwob - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: good (used), mileage: 5,59,900 km, Year of construction: 2005, Equipment: crane, IVECO STRALIS 480 Year 2005 Euro 3 Km 559,900 PTT 260 q. Port. Useful Kg. 11,850 Wheelbase mm 4,200 FIXED TRUCK mm 5600x2550xH floor mm 1250 Lhedpfot Skzyox Adwjb BONFIGLIOLI P20000/XL 6SI crane with max pull Kg. 3.410 Proportional Distributor Radio control

Condition: refurbished (used), functionality: fully functional, control type: CNC control, controller model: MB2000, working width: 3,200 mm, type of crowning: fixed, sheet thickness steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,500 mm, Equipment: documentation/manual, emergency stop, RAS 74.30 Multibend 2000 Technical Data: Back gauge: CNC 1500 mm Max. sheet thickness: 4 mm Working width: 3200 mm Equipment: pointed rail and bending rail Motorized adjustment of the bending beam, Safety stop (finger guard), emergency stop cable Various tools available as options Gooseneck segments available on request Lhodpfx Aoxhd H Isdwjb

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Lhsdpfxeuwlzyo Adwsb Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Lhsdpfx Adov Taiajweb Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: new, Year of construction: 2025, pressure 40 t stroke 250 mm table-size 625 x 1100 mm flat steel flat 200 x 20 tube diameter max. 2" table height 950 mm work speed 9,1 - 4,7 mm/sec return speed 45 mm/sec weight of the machine ca. 750 kg dimensions of the machine ca. 1,25 x 0,9 x 1 m total power requirement 3 kW quantity of oil 45 l New hydraulic horizontal bending press with stepless pressure regulation Ledpfx Adovx Dwrswjhb under load, patented tool holder, the BOTTOM cylinder allows 360° bends! Immersion depth and retraction point adjustable by handwheel,stepless feed adjustment. The machine is in the following sizes obtainable: pressure from 22 until 150 t, stroke from 200 until 450 mm. Many tools are in offer for the different kind of bending with additional price list. For more information please look at the video.

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm Ledpfogg N Hbsx Adwshb - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: Ljdpfx Adonh R Ekjwohb - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site