Used Carbumatic 470/470/H380 Mm for sale (71,137)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Nledpfx Akjmhh Dzofea Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Njdemhhx Ijpfx Akfela - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Nledomhhyajpfx Akfoa - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized Nlodpfxoh Ek Daj Akfea - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg Nledpfx Aksmhh Anofea - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Njdpsmhhf Ssfx Akfsla Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Nljdpfx Akomhhl Hjfea Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Njdpfjmidyfex Akfjla Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Nlodsmkixwopfx Akfoa - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth Nodpfxemhh Dts Akfela 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW Nledpfx Ajgd Uifokfea FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Nlodpfx Aeyvgp Tekfea Condition Device in good technical condition Visible signs of use Machine is operational

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Width: 1,000 mm • Frame depth: 600 mm • Load capacity per shelf: 150 kg • Number of shelves per bay: 6 pieces • Finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately from stock. Tiered prices per unit (net, plus VAT): Nodpeuk E Thjfx Akfela Starter bay: 1 – 5 bays: €92.30 6 – 20 bays: €88.61 21 – 50 bays: €84.92 from 51 bays: €81.22 Add-on bay: 1 – 10 bays: €63.55 11 – 25 bays: €61.01 26 – 75 bays: €58.47 from 76 bays: €55.92 Available from our warehouse in Nordhorn. YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Additional costs depend on the delivery location and shipment size, and can be quoted individually upon request. TERMS OF PAYMENT Payment terms to be agreed upon when placing the order. The quoted price is a per unit/net price, or as stated in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used products for warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions. Four factors for your success – The four pillars of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each Nodpfx Aksuba Rbofela • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Nljdpfsh Dv Uqsx Akfea Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: excellent (used), For sale: professional granite surface plate (marking-out plate) used in quality control and tool rooms. Nlodeyuqtpepfx Akfsa The plate is made of high-quality technical granite, ensuring excellent dimensional stability and wear resistance. Ideal for precise measurements, marking out, and component inspection. The unit is mounted on a robust steel stand. The equipment comes from an industrial facility. ⸻ Technical specifications • Type: surface plate / marking-out plate • Material: technical granite • Plate dimensions: approx. 1600 × 1000 mm • Thickness: approx. 200 mm • Weight: approx. 1014 kg • Base: steel construction The plate has a Trescal calibration sticker. ⸻ Applications • quality control • tool rooms • CNC industry • precision measurements • marking out components

Condition: used, mileage: 73,755 km, power: 346 kW (470.43 HP), first registration: 06/2022, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2022, Internal vehicle number: VTC20033 More INFO Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English) CIFA MAGNUM MK28L-115-RH-PB607 Rated capacity: 9 m³ Boom type: MK 28L Working height: 28.1 m Maximum reach: 24.1 m Pump type: PB 607L Pump output: 61 m³/h Maximum pressure: 71 bar Geometric volume: 14.6 m³ Fill level: 69% Nedsy A Aw Dopfx Akfela Model series: L Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Load capacity per level: 150 kg Nedey Dggljpfx Akfjla Number of shelf levels: 5 pieces Boltless assembly Diagonal bracing Tiered net prices per unit plus VAT: Starter Bays: 1 - 5 units: €69.50 net each 6 - 20 units: €66.03 net each 21 - 50 units: €62.55 net each from 51 units: €59.08 net each Add-on Bays: 1 - 5 units: €47.50 net each 6 - 20 units: €45.13 net each 21 - 50 units: €42.75 net each from 51 units: €40.38 net each PLANNING Our sales team will be happy to provide you with a non-binding quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. All prices are per unit/net prices or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry, and skilled trades. We continuously offer attractive deals on used equipment from various manufacturers at competitive conditions. Please do not hesitate to contact us if you have any questions. Four wins – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: like new (used), total length: 1,220 mm, total width: 400 mm, total height: 2,200 mm, load capacity per storage section: 150 kg, We offer used boltless shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf size: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 6 Boltless assembly Diagonal bracing Tiered pricing net per unit plus VAT. Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit from 51 bays: €67.32 net per unit Extension bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit from 51 bays: €46.75 net per unit PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The indicated price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT separately indicated. ABOUT US DLK, located in Nordhorn, specializes in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine systems, textile storage as well as machinery for trade, industry, and crafts. Nlsdsy Dgf Ispfx Akfoa We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Connect Four – The Four Success Modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, mileage: 5,52,616 km, power: 346 kW (470.43 HP), first registration: 02/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 46 m³, loading space length: 6,110 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, 3 UNITS AVAILABLE! MAN TGX 18.470 4X2 LL High-Capacity Curtain Side & Frame (Vehicle Number: 11999) Cab: MAN GX (extra high, wide, long) * Color: Moss Green (RAL 6005) * Roof Spoiler: yes * Electric Glass Sunroof * Central locking system with remote control --- Infotainment & Communication --- MAN Mediasystem Navigation Advanced (7") * MAN SmartSelect control concept * Smartphone Integration * MAN Sound System * Digital tachograph with remote access * 12V & 24V power sockets --- Interior & Comfort --- Air-sprung comfort driver seat with: * Lumbar support * Shoulder adjustment * Seat heating * Air-sprung comfort passenger seat * Multifunction steering wheel * Digital instruments * Electric parking air conditioning * Automatic climate control (Climatronic) * Additional water heater * Refrigerator * Two bunk beds (upper & lower) each with mattress * Full cabin curtain & sleeping area curtain * Electric front window roller blinds * Side window sun blinds * Additional cab insulation * Numerous storage compartments and shelves --- Lighting & Visibility --- LED daytime running lights * Fog lamps * Cornering lights * Automatic headlight leveling * Work lights at rear of cab * Electrically adjustable and heated mirrors * Kerb and front mirrors --- Engine & Drivetrain --- Engine: MAN D26 Euro 6d * Power: 346 kW (470 HP) * Torque: 2,400 Nm * Fuel: Diesel * Emission standard: Euro 6d * Transmission: MAN TipMatic 12-speed automatic * Retarder: MAN Retarder Eco Cool * Engine brake: MAN EVBec * Differential lock: rear axle --- Chassis & Axles --- Front axle: * 8,500 kg * Air suspension Rear axle: * 13,000 kg * Air suspension * Suspension: full air (LL) * Electronic ride height control: yes * Ride height adjustable while empty: yes --- Brakes & Safety --- Disc brakes front and rear * Electronic Brake System (EBS) * ABS * ESP * Emergency Brake Assistant (EBA) * Adaptive Cruise Control (ACC Stop & Go) * Lane Departure Warning * Turn Assist system * Traction Control (ASR) * Hill Start Assist (EasyStart) --- Trailer & Interfaces --- Drawbar trailer coupling * 2-line trailer brake connection * 24V trailer socket (15-pin) * ABS trailer socket Nodjy Arqyopfx Akfela * FMS interface * Superstructure data interface (KSM) --- * Tire size front axle: 355/50R22.5 steel * Tire size rear axle: 295/60R22.5 steel * Fuel tank: 780 liters * AdBlue tank: 60 liters * Technical GVW: 20,500 kg * Curb weight: 9,790 kg * Permissible trailer load: 24,000 kg * Overall length: 8,905 mm * Wheelbase: 4,800 mm --- H&W HWZPS24 Tridem Curtain-Sider Trailer (Jumbo) --- Vehicle: 12000 CODEXL Certified (EN12642-XL) * Fixed front wall * Sliding curtain tarpaulins on both sides * 2 toolboxes * Wheel chocks * Spare wheel * Fire extinguisher * Additional rear support --- * BPW axles with drum brakes * Wabco air suspension * Knorr TEBS braking system --- * Tire size: 435/50R19.5 * Technical GVW: 24,000 kg * Curb weight: 5,970 kg * Overall length: 11,650 mm * Number of axles: 3 * Loading length: 9,410 mm * Loading height: 3,050 mm * Loading volume: 70 m³ * Payload: 18,030 kg * Loading width: 2,470 mm * Euro pallet spaces: 23 --- Vehicle number: 11999 --- H&W Jumbo trailer: No. 20000 --- Subject to errors and prior sale --- Advertising and various labelling digitally removed. We are happy to assist you with all the necessary vehicle purchase formalities and are at your service for advice and support. Simply let us know your wishes and suggestions—we’ll take care of the rest.

Condition: excellent (used), For sale: Professional cordless shears Klauke EBS6LGKS, designed for fast and precise cutting of wire mesh trays, wire, and bolts up to Ø 6 mm. Fully functional and ready for work. The set includes: • Klauke EBS6LGKS cordless shears • Battery • Klauke charger • Original transport case Condition: • Used, 100% operational • Cutting mechanism operates smoothly • Battery holds charge well • Complete set Nlsdsxyum Nepfx Akfea Specification: • Maximum cutting diameter: 6 mm • Power supply: Battery-operated • Premium brand: Klauke – Germany • Fast and clean cutting with no effort • Ideal for installers, electricians, automation, and production

Condition: excellent (used), For sale: precision ORION dial micrometer with a measuring range of 0–25 mm and accuracy of 0.001 mm. Mounted on a robust cast iron stand for stationary operation—an ideal set for dimensional control in a factory, toolroom, workshop, or metrology laboratory. Micrometer technical specifications: • Range: 0–25 mm Nsdpfx Akow Rdgnofsla • Accuracy: 0.001 mm • Dial readout – fast and unambiguous readings • Precision engineered – solid head, stable micrometric scale • Brand: ORION (renowned manufacturer of measuring instruments) Measuring stand: • Stable cast iron base • Two-point adjustment • Enables repeatable measurements without handheld operation Set ready for use Very good condition – well-maintained, fully functional, smooth and precise measurements

Condition: excellent (used), For sale: high-quality milling head from the renowned brand Walter – Xtra-tec® series, designed for precise roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Working diameter: Ø80 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert pockets: 7 • High-quality build – German Walter precision • Applications: face milling, machining of steel, cast iron, alloys • Condition: used, very good technical condition, ready for work. This milling head delivers excellent performance and long service life – ideal for industrial, workshop, and production applications. Nljdpoxlgnijfx Akfja

Condition: excellent (used), Bezel (28371) Njdjlrp Nqopfx Akfola Center height 200mm diameter 65mm weight 9 kg more data, see picture

Condition: new, Press brake tool of big gooseneck punch for LVD Njdsiimv Nspfx Akfela H380mmxW190mmXL125mm segmented