- Arbeitsbereich 10 - 60 mm
Bhhevv9ogj
- min. Werkstücklänge 300 mm
- Fräsmotor 4,0 kW
- Vorschubmotor 1,5 kW
- Spannung 400 V / 50 Hz
- Drehzahl 3000 Upm..
- Vorschubgeschwindigkeiten 6,9,13,16 m/min.
- Abmessungen LxBxH 920 x 760 x 1000 mm
- Gewicht 250 kg
- inklusive 1 Fräser nach Wahl
CATALOG NUMBER 6185
TECHNICAL DATA
- diameter range of machined pins 140mm
- max diameter of the input material 200mm
- min length of input material 650mm
- max machining allowance per side 30mm
- 15kW knife head drive motor
- smooth adjustment of the feed speed + front / back
- 2.2kW feed motor
Sequentially:
Ywh3s
- 3 toothed pulling rollers
- 3-knife head
- 3 smooth pulling rollers
- pneumatically pressed rollers
- 2 input rollers, drawing gear pressed against the photocells
- additional slee...
COMPLETE LINE
FOR POLISADE PRODUCTION
FROM 40-100MM
option 120mm
SMALL ROUNDWOOD
PULL IN CHAIN
good condition
FRAZE RM 101-1403
PULL OUT WITH DROP
KAPPSAGE ( MISSING ENGINE )
Bm9cleua9k
AND SEVERAL TRANSPORTERS
ELECTRICAL CABINET
OPERATING PULSE
VERY LITTLE USED
- Working range 25 - 80mm
- Max. Diameter logs 100 mm
2vrwyamn
- Power motor 11 kW/2910 rpm
- Feed motor 0,8 kW
- Tool speed 4000 rpm
- Feed speed stepless 5 - 20 m/min.
- dimension L - 1900 mm, W - 100 mm, H - 1400 mm
- weight 1000 kg
New pneumatic system with cylinders. Replaced broken bearings. Sensor working ( two first infeed rollers are opening and closing automatically)
Cljmo7be
Round bar milling machine type RM 203 1403/4MK for cylindrical round milling of raw wood, finished diameter 80 - 200 mm, shortest wood length 1000 mm, 1 manually adjustable cutter head, design of cutter head with stepless adjustment and 4 combined cutter supports for roughing and finishing knives. Cutter head speed 1250 rpm, motor power for cutter head 45 kW, motor power for feed 4 kW, feed speed infinitely variable from 4 - 20 m/min via frequency converter, 4 pairs of infeed rolls, 3 pairs of o...
Round End Tenoner Helma
Helma (RP 100 PD)
Bsgv7w7zeq
CATALOG NUMBER 6186
TECHNICAL DATA
- diameter range of machined pins 45-200mm
- max diameter of input material 260mm
- minimum length of the input material 900mm
- max machining allowance per side 30mm
Hmqijij
- 30kW knife head drive motor
- 4 types of speeds: feed + forward / backward
- 3kW feed motor
Sequentially:
- 4 toothed pulling rollers
- 3-knife head
- 3 smooth pulling rollers
- additional sleeves 75, 80, 160, 45, 64, 100, 180, 65, 100, 140, 200mm
- dimensions length / width / height 33...
1100 024 OSWALD palisade plant and cut-off saw for the production of
Palisades: ø 40 - 100 mm, length 500 - 4000 mm, chamfered on one or both sides,
Half palisades: ø 40 - 100 mm, length 500 - 3000 mm, chamfered on one or both sides,
Mini palisades: ø 40 - 60 mm, length 300 mm, chamfered on one side and pointed 90° on one side,
Fence slats: ø 45 - 65 mm, length 750 - 2500 mm, 90" tapered on one side,
Big9zy0fr7
Consisting of:
1. feeder
2. step separator
3. infeed conveyor belt
4. double head rou...
I sell the cone milling moulder with grooving cutter ULMIA KF70, year 1990.
Very good condition. Available immediately.
Bifmtrkxse
Bezner Rf 40-140
Oviem9g
Good condition.
WEMA Probst profile milling machine
Hauptmtor 11kW
Dcjxgh22
dismantled and reverse loading ready
I offer a quality log cutter from Bezner.
This is a very well-preserved machine.
There is also a Bezner feeder for Bezner, which was bought directly for that.
The control cabinets are part of these two machines.
Putnre
All documentation (wiring and drawings) for the machines
Catalog number 6187
TECHNICAL DATA
- main hole with a diameter of 80mm
- 2 knife head
- 5.5kW engine
- additional sleeves with diameters of 70, 90, 100, 125, 140mm
- dimensions length / width / height 850x550x1170mm
- weight 142 kg
2svkor9x
ADVANTAGES
- additional sleeves included
- used machine
- very good condition
Net price: PLN 6900
Net price: EUR 1586
Net price, calculated at the rate of 4.35 PLN / EUR
(with greater fluctuations in the rate, the price may change)
- Machine in stock
- After the technical review
- Prepared for work
- Very good condition
TECHNICAL PARAMETERS :
- the range of workpieces 140-240 mm
- max. Diameter of the input material 360 mm
- min length of the material 700 mm
- head speed 2150 rpm
- feed speed adjustable on the geared motor
- feed motor 2,2kW
- 30 kW knife head drive motor
- diameter of the 200 mm exhaust stub
H7lwavrk3
Overall dimensions of the machine:
- length 300 cm
- width 110 cm
- height 200 cm
This Oswald round bar milling line works fully automatically. The special feature of this plant is that the wood is fed at the infeed conveyor and then the complete processing including packaging is done automatically. The rounding machine can mill woods in the range of 80 to 240 mm. The plant consists of the following machines or conveyors.
Hpo28bd
Feed conveyor
Step separator
Chain infeed
Rod milling machine RM243 1403
Pull-out conveyor belt
Cross-cut and chamfering device up to 4,0 m
Stacking...
Fully renovated automatic line for rounded poles production.
New electrical system and program , hydraulic system, pneumatic system, sensors, motors. Line is prepared for a long work.
It is possible to produce two types of pointing (4-side,cone). Material can be produced: cut/cut, chamfer/chamfer, point/chamfer. Line is already installed for test and inspection.
Ckxp83xy
By request can be provided videos of full cycle or spare units.
Hammer handle router / Profiled stick router Cosma
model RF 6
For economic production of straight axis profiled sticks from round,
any oval or square diameter.
Also workpieces of 2 different diameters can be produced
with gradually transition
to round circle at the other end.
Bbb9le2fxw
The sticks can be cylindric (prismatic), conical or profiled.
Disctance between the centers 600 mm
pneumatic claming of the workpiece
capacity approx. 300 – 600 pieces per hour
motor turning speed 2800 rpm
mo...
Catalog number 6188
TECHNICAL DATA
- main hole with a diameter of 100mm
- 2 knife head
- 5.5kW engine
- additional sleeves with diameters of 60, 70, 85, 120, 140, 200mm
- dimensions length / width / height 850x550x1200mm
- weight 160 kg
ADVANTAGES
- additional sleeves included
- used machine
- very good condition
Net price: PLN 6900
Net price: EUR 1586
Hdsfapl
Net price, calculated at the rate of 4.35 PLN / EUR
(with greater fluctuations in the rate, the price may change)
The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm.
RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 –...
New machine tool (0 work hours)
40-160 mm
6 flasks includeed
Baknn23bj9
18.5 KW large motor
2.5 Kw small motor
Round stick router VEB
D9zm8akby
with router heads for diameter 24 mm, 30 mm, 40 mm, 45 mm
with 4 spare-outfeed rolls
motor approx. 4 kW
3 speeds
Machine is in good working condition.
Catalog number 6189
TECHNICAL DATA
- main hole with a diameter of 100mm
- 2 knife head
- 5.5kW engine
- additional sleeves with diameters of 60, 70, 80, 120, 160, 200mm
- dimensions length / width / height 850x550x1200mm
Bvttgveuxf
- weight 164 kg
ADVANTAGES
- additional sleeves included
- used machine
- very good condition
Net price: PLN 6900
Net price: EUR 1586
Net price, calculated at the rate of 4.35 PLN / EUR
(with greater fluctuations in the rate, the price may change)
Automatic Bezner line for rounded poles production.
Rounding machine tool Bezner 50-200 mm
Cutting
Chamfering
Sharpening (cone)
Also half cutter is available to install in line
For more photos and information please contact us.
Bjhuyjbnyg
Produced length: up to 6m
Produced diameters: 40-140mm
Engine 25 kW
New belts and bearings
Operated 3 years
Itgpwtl
DIameters 40-140
Length of material 0.9-4 m
Bqn7d78y3k
Used Round bar-mills
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
