Used Gebhardt 6000-610-550 for sale (6,115)

Condition: used, functionality: limited functionality, The following are offered: OPS 650 (5-axis): Tool changer with 40 positions for HSK E40 OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot stations for the Erowa clamping system: 70 positions (workpiece changer) Robot stations for pallet changing: 8 positions Tjdpfx Afjzzavre Aoc The robot is currently not in operation due to a malfunction. However, this can be repaired so that it functions normally again. The cooling unit for the 650 machine is external.

Condition: used, Year of construction: 2018, saw blade diameter 550 mm Tjdpfx Aozvhm Ujf Asc weight ca. 650 kg Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Todeurf I Ujpfx Af Aec Price: 7,900 Euro + VAT, negotiable, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Tjdozvm Dlopfx Af Asc Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine Todpfx Afjzln Ude Asc

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Tsdpsy N Dkfjfx Af Asc

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Table length: 6000 mm Tjdpfx Afezz N T To Ajc Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Cooling system Year of manufacture: 2010

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Tedoz Ep Ayjpfx Af Aoc Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. Todpfexwqk Ejx Af Ajc A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: used, Year of construction: 1981, total length: 3,300 mm, total width: 1,100 mm, total height: 1,250 mm, Colour: Grey Empty weight: 2.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 14946 - Drive system: Conventional - Power [kW]: 7.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 312 - Distance between centres [mm]: 1600 - Bed width [mm]: 385 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 3300mm x 1100mm x 1250mm (l x w x h) Tjdpfx Afez Enywe Asc - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Tedpfxozgt D Hs Af Asc Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Tedpfxsz Hcans Af Aoc Additional information - Specification - Back stop - Roll shelf

Condition: repair required (used), RMS MZV 303W20 Vibration Exciter with Team Sliding Table 483.24/2 – Parts Carrier Description For sale is a used vibration testing system from RMS Regelungs- und Messtechnik / Dynamik Test Systems with a Team sliding table. The system consists of, among other things, an RMS vibration exciter, type MZV 303W20, and a Team sliding table, model 483.24/2. The complete unit is offered exclusively as a parts carrier. The functionality of the system has not been tested. Operational readiness or completeness is not guaranteed. Due to the existing components, the unit is particularly suitable for obtaining spare parts, for repairing existing vibration testing systems, and for repair and modification projects. Technical Data Vibration Exciter Manufacturer: RMS Regelungs- und Messtechnik Dynamik Test Systems Type: MZV 303W20 Device Type: Vibration Exciter Year of Manufacture: 1995 Sliding Table Manufacturer: Team Model: 483.24/2 Year of Manufacture: 1998 Weight according to nameplate: 600 kg Equipment RMS Vibration Exciter MZV 303W20 Team Sliding Table 483.24/2 Clamping plate with threaded holes Pneumatic vibration isolation Weight compensation Tsdpfez E Iqvjx Af Aoc Manometer and controls Pneumatic control Pump/motor assembly Hose lines and connections Other components and accessories as shown in the pictures Dimensions Overall system: approx. 2,500 × 1,300 × 1,500 mm (L × W × H) Note: The overall dimensions have been estimated based on the available pictures and are not manufacturer's specifications. Weight Sliding table according to nameplate: 600 kg Total weight of the system: cannot be determined definitively. There is also a handwritten marking on the system stating "approx. 4000 kg". Since this information cannot be assigned to a definitive nameplate, it will not be used as the technical total weight. Transport Data Transport dimensions: approx. 2,500 × 1,300 × 1,500 mm Transport weight: to be determined before loading Due to its size and weight, loading or collection requires suitable heavy-duty transport equipment. Scope of Delivery 1 × RMS MZV 303W20 Vibration Exciter 1 × Team Sliding Table 483.24/2 Existing mounting, control and supply components Hose lines and accessories as shown in the pictures Condition Used. Signs of wear and tear due to age and use are present. The visual condition can be seen in the pictures. Sold exclusively as a parts carrier. Functionality not tested. The system is not offered as a functional machine. No guarantee for operational readiness or completeness. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Tedpfjttri Tjx Af Aoc Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: used, Year of construction: 2002, Pastry line / Processing line Rondo Jumbolino SPF 610 C Year of manufacture: 2002 Tjdpfxjz A Spde Af Asc Condition: functional Includes: cutting rollers, folding shoes, accessories, etc. Double cutting station Dough scrap/waste remover with collection container Spraying device Pneumatic filling device Spreading device Infeed roller Guillotine Belt running direction: left Belt width: approx. 640 mm Overall length: approx. 8250 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The equipment is available for sale as a complete system or in individual parts/components. DIP-TECH AR 6000 digital glass printing system, manufactured in 2013, with an integrated drying module. The machine can be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Please contact us for further information, specifications, photos, available components, and pricing. Technical specifications: • Max. glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly onto glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – suitable for tempering • Printing technology: Digital ceramic in-glass printing • Application: Architectural and interior glass • Glass types: Float, tempered, laminated Tsdpfoymb Tqex Af Aec Key Advantages: ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural, and interior glass ✔ Machine in production – ready for immediate operation

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Tjdpfozxr Dcjx Af Ajc Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: used, Year of construction: 2016, HEIGHT OF CENTERS 550 MM PERMITTED DIAMETER OVER BED 1100 MM PERMITTED DIAMETER OVER CARRIAGE 720 MM BED WIDTH 690 MM SPINDLE BORE 160 MM SPINDLE NOSE ASA 11" ROTATION SPEED 0 - 800 RPM 3 RANGES SPINDLE MOTOR POWER 39 KW AUTOMATIC RAPID TRAVEL 7 M/MIN C-AXIS Y-AXIS +/- 60 MM PERMITTED WEIGHT BETWEEN CENTERS 10000 KG PERMITTED WEIGHT BETWEEN CENTERS WITH STEADY REST 12000 KG TAILSTOCK CONE 6 CM TAILSTOCK SLEEVE DIAMETER 140 MM WEIGHT 16,000 KG CNC D. ELECTRON Z 32 ELECTRONIC HANDWHEEL SELF-CENTERING CHUCK, DIAM. 500 MM PLATEU DIAM. 1000 MM BARUFFALDI TBMA Y C 250 MOTORIZED TURRET WITH 12 POSITIONS VDI 50 CHIP CONVEYOR AUTOBLOK RX 6 HYDRAULIC STEADY, RANGE 85 - 505 MM Todpfx Ajzwlufef Aec YOM 2016

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown Tedpfx Afszv Saro Aoc - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm 7" touchscreen Release agent spraying at the infeed Todpfjzvapuex Af Aec Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Spraying unit for finishing Smoothing unit New machine, available after exhibition

Condition: refurbished (used), functionality: fully functional, total length: 7,350 mm, total width: 2,200 mm, total height: 2,985 mm, power: 120 kW (163.15 HP), conveyor belt length: 6,000 mm, conveyor belt width: 600 mm, temperature: 230 °C, We offer this fully refurbished Alco AGU 6000-600-E. Oven length: 6,000 mm Belt width: 600 mm Overall length: 7,350 mm Overall width: 2,200 mm Heating capacity: approx. 120 kW: 2 x 60 kW (2 baking zones) Air temperature: approx. 80 – 230° C Baking time: 4 - 25 min. - adjustable Frequency inverter: SEW Eurodrive • Product is baked using hot air and steam • Two baking zones with circulating hot air • Fans direct the air to the heating elements in the center • Air deflectors guide the hot air onto the product • Baking process optimized by steam injection • Continuous cleaning of the conveyor belt with brushes and water nozzles • A chimney with a throttle valve is located at the product inlet and outlet • Water seal prevents lateral steam leakage when the hood is lowered Revisions: - New belt Todpfx Ajzzmltef Ajc - Wear parts inspected and replaced if necessary - New motors for fans - Other motors refurbished - System function tested If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Tsdpfx Afozqt Dnj Aoc Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Year of construction: 2001, condition: used, Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Tedpfx Aszzqc Njf Aec

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station Todpfsy Samuex Af Ajc ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 1992, offer consist of: - collator AC-6000 with - cover feeder CF-20 Tjdpoz Hbfisfx Af Aec Horizon AC-6000 collator - model: air-suction collator - bins: 6 - error avoidance: misfeed-, doublefeed- and jamming control programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - selective collating - sheet size: max. 470x318mm; min. 210x148mm - processing strength: 50-260g/sqm - loading height: 100mm/ bin - production speed: max. 2.400 cycles/h - power: 400V - 1,86kW - dimension: 1650x650x1650mm - weight: 400kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs