Used Helmerding Eccentric Press for sale (12,871)

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm ram adjustment 63 mm Fedpjztfz Rsfx Aatjpl weight of the machine ca. 2600 t

Condition: ready for operation (used), GIZELIS ECCENTRIC PRESS 25 TONS IN VERY GOOD WORKING CONDITION Fjdpfx Aozupqfeatopl "Your Next Reliable Production Machine Starts Here"

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Fjdpfx Aaoy D R N Rotopl Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: good (used), Year of construction: 1994, power: 75 kW (101.97 HP), pressing force: 315 t, ram plate width: 1,000 mm, ram plate length: 1,500 mm, year of last overhaul: 2018, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Fodpozzc Nusfx Aatopl Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 200 h, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 365 mm, operating speed: 54 mm/s, Equipment: CE marking, documentation/manual, safety light barrier, Almost unused machine. Includes a Coil Tech unwinder. 4. Technical Specifications Maximum pressing force t 60 Table-to-ram distance mm 365 Ram stroke mm 4 - 102 Number of strokes per minute 54 Die opening diameter mm 40 Table overhang (from the center of the ram) mm 245 Ram adjustment mm 95 Ram surface dimensions mm 425 x 250 Table dimensions mm 750 x 500 Table opening dimensions mm 170 Supporting table force with T-slot mm 70 Distance between frame side walls in the working area mm 430 Fpedezw Rpzspfx Aatjl Distance between anchor bolts (depth) mm 900 Distance between anchor bolts (width) mm 695 Machine dimensions: height mm 2270 depth mm 1850 width mm 1100 Weight kg 3640 Motor power kW 7.5 Motor speed rpm 1450 Direct sale to the end-user only. The price includes loading at the seller's location: W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 1973, machine/vehicle number: 727173, Offer 25450 Technical Data: - Pressing force: 100 t - Throat depth: 300 mm - Table size: approx. 650 x 450 mm - Table height adjustable - Pass-through hole in table: approx. 200 x 100 mm - Max. installation height: approx. 450 mm - Ram surface: 70 x 140 mm - Pin hole in ram: 40 x 80 mm - Ram adjustability: 60 mm Fodoxxvzlepfx Aatepl - Stroke adjustment: 10 - 100 mm - Strokes per minute: 80 /min - Pneumatically assisted clutch - Drive: 380 V / 5.5 kW - Space requirement (approx.): W 1350 x H 2550 x D 1600 mm - Weight (approx.): 5000 kg

Condition: good (used), Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm Fsdpszytmbjfx Aatopl -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 60 t, stroke length: 95 mm, table width: 520 mm, table length: 720 mm, throat depth: 260 mm, ram plate width: 340 mm, ram plate length: 720 mm, total length: 1,340 mm, total width: 1,450 mm, total height: 2,200 mm, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, safety light barrier, CRONOSSTECH CECP 60 | 60 Ton C-Type Eccentric Press | Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's trusted press machine manufacturer: a 100% CE-certified 60-ton C-type Eccentric Press for your sheet metal cutting, punching, and cold forming operations. Industrial press solutions offering minimum maintenance, maximum work safety, and flawless stroke accuracy for your high-volume production lines. Key Advantages for Your Industrial Production: Fjdozwk Rrjpfx Aatepl High Repeatability: Minimizes scrap rates with stable stroke performance in serial production lines. Maximum Work Safety: Operator safety-focused design with a light curtain and double-coil safety valve. Low Maintenance Costs: Continuous and long-lasting operation thanks to a central, fully automatic grease lubrication system. Fast Commissioning: Immediate start of production with PLC control infrastructure and dual hand/foot control. Application Areas: Sheet metal cutting, punching, and blanking operations Cold shearing and metal forming applications Automotive, white goods, and related industries' serial production lines ✅ STANDARD EQUIPMENT Rigid steel frame structure Bearing system with support on 4 sides Spheroidal graphite cast iron connecting rod and gear bearings 4140 hardened steel crankshaft and transmission shafts Pneumatic clutch and brake combination Manually adjustable stroke and mechanical safety device Emergency reverse motor movement ✅ OPTIONAL FEATURES Anti-vibration industrial pads Touchscreen LCD display (standard for 150–300 tons) Hydraulic safety system (standard for 200–300 tons) Roll feeder, driver, and straightener integration Project-specific design and production of 1 set of dies ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton | Motor Power: 4 kW | Stroke Rate: 50 Strokes/min Table Size: 520×720 mm | Slide Size: 340×220 mm Throat Depth: 260 mm | Stroke Adjustment: 0–95 mm Slide Adjustment (Adjustment): 70 mm | Table Hole Diameter: Ø150 mm Table–Slide Distance: 360 mm | Slide–Table Distance: 395 mm External Dimensions (W x D x H): 1340 x 1450 x 2200 mm Approximate Weight: 2750 kg (Note: Please contact us for stroke, table size, and technical modification requests specific to your production line.) ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Export operations, installation, and all after-sales technical support processes are carried out by our in-house expert teams in accordance with international standards.

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg - Year: 1981 - Documentation available: No - CE certificate present: No Fpsdpfxsxhcgye Aatjl - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1973, Description to follow! Fpedpfx Ajzxh S Njatsl

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine Fpedpfx Aaou Rwa Ietsl - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: Fpsdpfx Aaetzxdzstsl - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg Fpsdpfxex Dkfps Aatsl - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, Equipment: documentation/manual, Bed size (x-y/mm) 2150 x 1200 Ram dimensions X-Y (mm) 2000 x 1200 Stroke (mm) 300 Slide adjustment (mm) 200 Strokes per minute 5 - 50 Side window dimensions (x-y/mm) 800 Motor power (kW) 34.5 Fpsdpfxezzw N Nj Aatjl

Year of construction: 1965, condition: good (used), Table area 1,400 x 950 Fjdpspwgy Hofx Aatepl ram surface 1.000 x 600 ram adjustment 135 mm Stroke 60 - 200, stroke /min. 24

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm Fpedpfsy Nd Svox Aatsl total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Fjdpfx Aaezq Sp Astopl Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: Fedpfx Aaey Tvdxjtjpl - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request Fpodpfjrm Ntpox Aatol the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Year of construction: 2022, machine/vehicle number: 04H20001A210064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 20 mm, table width: 740 mm, table length: 1,200 mm, distance table to ram: 436 mm, Equipment: CE marking, safety light barrier, We offer this used Dirinler CDS 2000 B1 eccentric press, year of manufacture 2022. Model: CDS 2000 B1 Serial number: 04H20001A210064 Year of manufacture: 2022 Nominal force: 2000 kN Distance between table and ram: 436 mm Stroke length: 20–140 mm Fjdsy Icvqjpfx Aatspl Stroke rate: 50–70 min⁻¹ Ram adjustment (max): 97 mm Air pressure in clutch-brake unit: 5.5 bar Table dimensions: 740 × 1200 mm Voltage: 3/N/PE 400 V 50 Hz Control voltage: 24 V Overrun distance: 150 mm If you have any questions or need further information, please contact us by message or phone.

Condition: used, Year of construction: 1957, Press force: 100 tons Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Shut height (max. stroke, adjustment up): 460 mm Table area: 910 x 680 mm Fpodpfszymursx Aatol Table opening: 400 mm Table height above floor: 800 mm Ram area: 630 x 400 mm

Condition: used, Year of construction: 2017, functionality: fully functional, Eccentric press for sheet metal processing with tools. Fjdpfx Aajytykzjtspl

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min Fedezwg Umopfx Aatopl table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support. Fpsdpfsx Ura Sox Aatjl

Condition: used, Russian manufacturing, Fpodpfx Aasxbf Sfjtsl Max. pressing force: 25 t Table size: 550 x 400 mm