Used Ixion Bench Tapping Machine With Leadscrew for sale (66,557)

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Kodpfxettc Uas Aahedp

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke 70 mm total power requirement 0,9 kW Kedey Tbv Tspfx Aahedp

Condition: used, spindle taper 750 W // 400 V // 50 Hz Kodjt Rmbyepfx Aahedp Boring power 25 mm connected load MK 2

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm bore stroke / mm Kedey S Dm Sopfx Aahedp BD13M – 5-Spindle Gang Drill / Bench Drill

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: - Ball-bearing parallel arm - Hydraulic unit - Digital speed display - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame - Operating manual Kdjdsyazfyjpfx Aahjp

Condition: new, Tool grinding machine Manufacturer: OPTigrind Model: GH 20 T Art. No.: 3100125 Condition: New machine Speed: 5,000 rpm Clamping range: 1 - 12 mm Kdedpfxsc I Tzve Aahjp Standard equipment: - Collets 385E, sizes 4 / 6 / 8 / 10 / 12 mm - Corundum cup grinding wheel - Diamond cup grinding wheel - Device for re-grinding turning tools - Device for re-grinding shank milling cutters - Device for re-grinding twist drills - Operating manual

Condition: used, Year of construction: 1976, machine/vehicle number: 5591, bore capacity in steel (diameter):13 mm throat:185 mm bore stroke:70 mm taper MK:Bohrfutter 1 - 13 mm turning speed range:400 - 4000 U/min speed steps work spindle:6 table surface area:200 x 250 mm distance spindle /table:170 mm column diameter:65 mm total power requirement:0,22 kW Kdsdpfx Aecxxvbsahep weight of the machine ca.:0,08 t dimensions of the machine ca.:0,75 x 0,3 x 0,65 m

Condition: used, bore capacity in steel (diameter):10 mm Kodpoh Ra Nxefx Aahjdp throat:190 mm bore stroke:65 mm total power requirement:0,5 kW weight of the machine ca.:0,05 t dimensions of the machine ca.:0,3 x 0,7 x 0,7 m column diameter:80 mm machined bearing plate::Ja table surface area:300 x 250 mm height adjustment:0 - 280 mm speeds:950 - 2000 U/min

Condition: used, bore capacity in steel (diameter):5 mm throat:100 mm bore stroke:30 mm voltage:220/380 V turning speeds:2820 U/min clamping table:170 x 120 mm workpiece height max.:120 mm total power requirement:200 W weight of the machine ca.:35 kg dimensions of the machine ca.:0,25 x 0,43 x 0,5 m Kedpfx Aocxxmlsahodp

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min Kdodpsvh Nbbefx Aahop column diameter 65 mm total power requirement 0,37 kW

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Table size 400 x 400 mm Table height 850 mm Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm Kedpfjy N Duwox Aahsdp - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Ksdpfxjy R N Ilj Aahsdp Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column Kodpfx Aoy H Id Roahedp - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: excellent (used), Year of construction: 1999, Stock number: 2820 Manufacturer: IXION Year of manufacture: 1999 Kdjdpfxswrmrdo Aahsp Type / Model: BTU 15 Machine number: 182904 Drilling capacity: up to 16 mm Spindle mount: Drill chuck B16 Speed range: 480 to 3,800 rpm Table: 290 x 350 mm Throat: 225 mm Stroke: 100 mm Head height adjustment: 300 mm Distance table-chuck: 70 to 370 mm Footprint: 290 x 440 mm Connection: 0.8/1.0 kW Accessories/Equipment: Drill chuck Condition: very good Weight: 140 kg Dimensions: 290 x 440 x 1,700 mm

Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Kdedey Tl Rbopfx Aahop

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 Kodpfeuhhzhsx Aahjdp table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. Kdsdpfx Aoh Aw Rneahsp For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Year of construction: 1970, condition: good (used), Type / Model: BST 13 Kdsdpfx Aasfir T Ushsp Machine number: 37749 Drilling capacity: 13 mm Spindle mounting: MK 2 Speed range: 475 to 2,400 rpm Overhang: 190 mm Table: 230 x 220 mm Clamping area: 165 x 170 mm Height adjustment: 300 mm Stroke: 100 mm Total power consumption: 0.45 kW Accessories / Equipment: Multi-spindle drilling head (4-fold) presumably Sigloch & Schrieder Condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 automatic changeover right - left Kedpsuf N S Aofx Aahedp Total length 295 mm Diameter 105 mm

Condition: good (used), 1 x Drill + tap machine Steinel GT.6.52 Technical data: Speeds: 500/630/1000/1250 rpm power in steel: M 6 max.clamping diameter collet: 10 mm The machine can be visited under power. Kdedpfx Aaema Efyehsp

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Ksdpfx Aaoyvuh Ishedp Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Maximum milling height: 120 mm Maximum milling depth: 50 mm Maximum milling width: 260 mm Spindle diameter: 40 mm Motor power: 11 kW Kdjdpfxjy Sg Ufs Aahjp Spindle speed: 5,400 rpm Feed rate: 0–3.5 m/min Weight: approx. 400 kg

Condition: new, 14 mm M 10 MK 2 230-4.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm Kdodpfoyv Nqdjx Aahep 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) - Spindle protection with electrical fuse - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth

Condition: new, 16 mm M 12 MK 2 100-2.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW Kodpfx Asyv Nn Njahsdp weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) - Spindle protection with electrical fuse - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth

Condition: new, 23 thread capacity M10 bore stroke 90 mm Short spindle MK2 throat 180 mm Machine table - usable table surface 285x285 mm table load 45 kg spindle turning speed range 150-1.250/350-3.000 UpM total power requirement 0,75 kW Kdsdjyv Nmfspfx Aahop Overall size 735x470x1080 mm weight of the machine ca. 106 kg Standard equipment: - Digital speed display - Movable LED machine light - Stepless spindle speed via frequency converter - Tiltable work table +/- 45 degrees - Mains cable and plug so ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity