Used Kracht Electro-Hydraulic Pipe Bending Machine for sale (75,209)

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Dsdpfxjwivn Ns Ap Dswc Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting Dwsdpfx Apoz N Hxho Dec - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, Year of construction: 1999, tube diameter bis 60 mm Dwedpfsvvnm Sox Ap Dec weight of the machine ca. 1,8 t

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability Dodpfxjxab E Sj Ap Djwc - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, round material 40 mm tube diameter 70x2 mm Dedpfxsyv Nk Rj Ap Djwc square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Dwedsrc Hiispfx Ap Dec

Condition: used, Pedrazzoli UNIVERSAL BROWN 42 CN 1 axis pipe bender. Max bending capacity: mm 42×2.5. Minimum internal radius of bending : mm 22. Max average radius of bending operating with rollers : mm 260. Max angle of bending: 185°. Max length of tube to be bent : mm 3100. Installed power : Kw 5.5. Dimensions : mm 4700x800x1300. Weight : Kg 1100. Dodpfx Apsqgd Ekj Djwc

Condition: used, Year of construction: 1995, tube diameter 45 mm wall strength 2 mm bending radius min. . mm weight of the machine ca. 1,7 t dimensions of the machine ca. 5x0,85x1,5 m sn 1765 Pipe length up to 4100 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Dwodpoyutr Usfx Ap Dec possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 9340 € 180.26 € 48 mm 570 mm 410 mm 1000 mm 110 kg 6 cm³ 48 x 3,5 mm 1"1/2 x 3.68 mm 54 x 1,5 mm 50 x 4 mm 48 x 2 mm 48 x 2 mm 60 x 3 mm 64 x 2 mm 64 x 2 mm 60 x 2 mm 50 x 4 mm 32 mm 45 x 16 stehend, 45 x 25 mm 300 mm 10 mm 10 mm 2/3 U/min 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): . maschine tube radius SB 48M K2D Dwedowirlkjpfx Ap Dsc SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2" (21,3 mm), R46 Ø 3/4" (26,9 mm), R56 Ø 1" (33,7 mm), R67 Ø 1" 1/4 (42,25 mm), R90 Ø 1" 1/2 (48,25 mm), R100 . maschine tube radius SB 48M K3D SB 48M Gas inch 3 x Ø SB 48T K3D SB 48T Gas inch 3 x Ø tools: Ø 1/2" (21,3 mm), R67 Ø 3/4" (26,9 mm), R82 Ø 1" (33,7 mm), R112 Ø 1" 1/4 (42,25 mm), R130 Ø 1" 1/2 (48,25 mm), R150

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 3,80,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm Dedpfx Apsz Dkr Hj Dewc -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm serial number EBD mode of operation Schneiden/ Entgraden / Re Djdpfjumyhljx Ap Dowc speed Rollen 450 U/min m/min

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Dedpjxcx Atefx Ap Djwc

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 mm total power requirement 5,5 kW weight of the machine ca. 1300 t dimensions of the machine ca. 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Dwsdpfx Aot I D Uxsp Doc Mandrel is no longer available, can be retrofitted

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply Dwjdpsz Ix Uksfx Ap Djc • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: new, 95 mm Shaft diameter 30 mm Dedpfxjyv N A Ho Ap Dewc Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm Djdpfx Ajxaa Sdsp Dswc - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Dwsdpfx Ajx Dtt Aep Doc Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Djdpfezf Hkdox Ap Dewc Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) Djdpfx Ajyv Nniop Dewc - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: as good as new (ex-display), Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC Dwsdpfx Apexabu Hj Doc total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable Dodpspgmqiofx Ap Dswc CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm Dodpoiau Uujfx Ap Djwc pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t

Condition: new, 100 mm roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Dwedpfxjy H N Ide Ap Djc Drive 11 kW weight 2.600 kg range L-W-H 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm Dodpfoy H N Ikox Ap Dewc weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers Dwjdpfxjy H N Rfe Ap Dsc - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working