Used Manzoni Mechanical Press 60 Ton for sale (39,878)

Condition: ready for operation (used), functionality: fully functional, ROMEC PRESS BRAKE 4000 X 125 TON DISPLAY ON 2 AXES MOTORIZED BACKGAUGE USED MACHINE Dcjdpey Nc Ivjfx Al Ajk INTERNAL CODE SVR 136

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm Dcodsu Nfinjpfx Al Aok throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm Dcodpsu Icwgjfx Al Aek no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Dedpozbvvvefx Al Ajck Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, stroke length: 65 mm, table width: 450 mm, table length: 320 mm, ram plate width: 280 mm, ram plate length: 180 mm, total length: 1,145 mm, total width: 970 mm, total height: 1,930 mm, overall weight: 1,250 kg, Equipment: documentation/manual, Excentric Press LEN 10C. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 Tons, - Number of ram strokes in continuous operation: 80 or 160 /min, - Number of single strokes: 45/min and 60/min. - Adjustable ram stroke: 6–65 mm, - Adjustment range between table and ram: 45 mm, - Throat depth: 160 mm, - Distance between table and ram: 225 mm, - Table size: 450 x 320 mm, - Ram size: 280 x 180 mm, - Overall dimensions (length x width x height): 1145 x 970 x 1930 mm, - Pneumatic clutch (min. compressed air pressure: 0.4 MPa), Dsdpfx Aloy Ry Tfo Aeck - Motor power: 1.1/1.5 kW, - Press weight: 1250 kg.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Dcedpfx Alowndnuo Ajk Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Dcsdpfx Aeu D Dhxsl Ask Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Dcjdpfx Aou Hav Rsl Aok Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Djdpfjwcqc Ujx Al Aeck Model year 1995 Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Dcsdpey Tptasfx Al Aok Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, TECHNICAL DETAILS Djdpfxsuhakno Al Asck - See photos

Condition: used, TECHNICAL DETAILS Dcodpfxouhakhe Al Aok - See photos

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] Dsdpfx Ajuhakbsl Asck - Number of punches : from 50 to 150 [p/min] - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm]

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] Dsdpfxsuhahme Al Aeck - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS Dcodpfx Aeuhahgsl Ajk - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] Dcodpsuhahajfx Al Aok - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. thickness : 2 [mm] - Shocks per minute : 150 [H/min] - Distance between mounts : 230 [mm] Dcsdsuhag Nspfx Al Aek - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] Dcodpfx Alsuhag As Ask - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top Dsdpfx Aodzp Trel Aeck - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: used, functionality: fully functional, ---IMAL hydraulic press brake, 3000 x 85 tons (red and white), 4 axes, 500 mm throat depth. Dimensions: 400 x 180 x 260 (H) cm, weight 7,000 kg (70 cwt). Djdpfx Alswyndwj Ajck

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Dcjdpefin Hwefx Al Ajk Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Dcjdpfed Rlk Hsx Al Ajk Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Dodpfjfirwmsx Al Aock Servo motor for back gauge & linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety guards with switches CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport _____ With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services relating to training and customer support. We would be happy to support you from Germany – from consulting, through purchase, and throughout the entire life cycle of your machine. With our German branch, we are always on site to provide quick and efficient support. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Distance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Overhang: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis retraction speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 Motor power: 37 Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25000 kg Standard equipment: Control system: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes of the rear stop: X1, X2, R1, R2, Z1, Z2 Control system: DELEM DA-66T Delem 66T – 69T or Durma control system can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending assistance 750 mm to 1500 mm selectable Parking area for support arms (1000 mm) TANDEM preparation Laser bending line Oil heating Central lubrication, manual or motorized Air conditioning for the control cabinet Dcedpfx Aled Hy Hus Ajk Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Axes: Y1, Y2, X, R Control: Delem 66 T or 69 T (selectable) CE standard with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Dedsfin Hcepfx Al Aock Durma upper tool Durma lower tool CNC-controlled motorized crowning Overhang: standard 510 mm or selectable 750 mm, 1000 mm Back gauge: motorized & linear guide & ball bearing system Back gauge fingers: height-adjustable Back gauge motor: AC type Adjustable support arms with linear guide along the entire length Technical data available upon request.