Used Poreba Neu Futter/Planscheibe for sale (2,761)

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Kedpfx Afszmqncj Hjdt Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080?

Condition: used, first registration: 08/1978, Year of construction: 1978, LAG 37 m³ slurry trailer with 6 chambers ! Newly refurbished for approx. €10,000, new brake system, new 3rd axle, new electrical system, new air suspension! • Aluminum body • 37,200-liter capacity • 6 chambers of 6,200 liters each • 6 dome covers Kdsdpfxjwmpats Af Hst • Direct discharge at the rear! • 3 x BPW air-suspended axles • Drum brakes • 385/65 R 22.5 tires - New MOT! - Ready for use! Subject to errors and prior sale!

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 Kdodpfx Aefhk Insf Hjt - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, mileage: 960 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, municipal new vehicle with day registration, Iveco T-Way 360 AD BL 4x4 tipper, wheelbase 3.80 m, with Meiller winter service hydraulics, front mounting plate, winter service lighting, air-suspended rear axle, differential lock on front and rear axles, Euro 6 E engine, automatic transmission, pneumatic rear tailgate locking system on the rear drop gate, AHK coupling Rockinger, switchable ABS, tipping hydraulics connections, reversing camera, air conditioning, and more. Equipment: Mileage approx. 960 delivery kilometers 18,000 kg permissible total weight 21,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, Meiller Front mounting plate with hydraulic connections, Meiller Winter service lighting Kdodez Dmfvopfx Af Hot AD Active Day cab Wheelbase 3,800 mm Euro 6 E engine with 360 hp and 1,850 Nm of torque 4x4 drive Differential lock in front and rear axles Meiller 3-way tipper approx. 4.80 m x 2.45 m x 0.60 m high Front wall approx. 1.15 m high, with chute 6 lashing eyes, fully retractable in the floor panel Rear tipping bridge with pneumatic claw locking system ZF-TraXon 12 TX automatic transmission Transfer case with reduction gear Air conditioning AHK coupling Rockinger with compressed air connections 2 tipping hydraulics connections at the rear Front axle with leaf springs and rear axle with air suspension Shock absorbers and stabilizers on front and rear axles Hill start assist Rocking function Blind spot assistant Lane keeping assist Emergency braking assistant EBS with ABS and ASR ABS switchable Cruise control Sun visor Reversing camera Multi-function steering wheel Driver's seat with air suspension Electrically adjustable and heated exterior mirrors Electric windows municipal new vehicle with day registration on December 19, 2025 Price NET, plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2617

Condition: used, mileage: 960 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, municipal new vehicle with day registration, Iveco T-Way 360 AD BL 4x4 tipper, wheelbase 3.80 m, with Meiller winter service hydraulics, front mounting plate, winter service lighting, air-suspended rear axle, differential lock on front and rear axles, Euro 6 E engine, automatic transmission, pneumatic rear tailgate locking system on the rear drop gate, AHK coupling Rockinger, switchable ABS, tipping hydraulics connections, reversing camera, air conditioning, and more. Equipment: Mileage approx. 960 delivery kilometers 18,000 kg permissible total weight 21,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, Meiller Front mounting plate with hydraulic connections, Meiller Winter service lighting AD Active Day cab Wheelbase 3,800 mm Euro 6 E engine with 360 hp and 1,850 Nm of torque 4x4 drive Differential lock in front and rear axles Meiller 3-way tipper approx. 4.80 m x 2.45 m x 0.60 m high Front wall approx. 1.15 m high, with chute 6 lashing eyes, fully retractable in the floor panel Rear tipping bridge with pneumatic claw locking system ZF-TraXon 12 TX automatic transmission Transfer case with reduction gear Air conditioning AHK coupling Rockinger with compressed air connections 2 tipping hydraulics connections at the rear Front axle with leaf springs and rear axle with air suspension Shock absorbers and stabilizers on front and rear axles Hill start assist Rocking function Blind spot assistant Lane keeping assist Emergency braking assistant EBS with ABS and ASR ABS switchable Cruise control Sun visor Ksdpfxsz Dmg Te Af Hjdt Reversing camera Multi-function steering wheel Driver's seat with air suspension Electrically adjustable and heated exterior mirrors Electric windows municipal new vehicle with day registration on December 19, 2025 Price NET, plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2617

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Kedjwk Iq Eepfx Af Hjdt Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: TCG 160 x 5M, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 1,600 mm, disc diameter: 1,600 mm, LATHE AVAILABLE FROM STOCK The heavy double-guide lathe TCG is a universal machine tool that allows roughing and finishing turning, drilling, threading, turning cones, boring, heavy and very heavy objects with one clamping. The TCG lathe is a lathe for machining objects with diameters of 1600 mm. The construction system and rigidity of the structure allow turning with large chip cross-sections and ensure high smoothness with minimal ovalization of the workpiece. The machine is located in our company ZAK in Poręba ul. Zakładowa 2 (Poland) We encourage you to submit inquiries. Kjdpfxovw Uu Se Af Hsdt

Condition: new, A huge stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA 160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. - wheels, shafts and gears - toothed racks - lead screws with nuts - cross slide screws with nuts - electromagnetic clutches and brakes, brush holders - pumps, filters, motors - steady and movable rests - tailstock sleeve - tool post - lathe chuck Kdsdpsv R Uauofx Af Hst Ask for more.

Condition: used, mileage: 55,341 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, Good condition and fully functional, no need for repairs. +++ Vehicle is roadworthy ++ Power steering ++ 7.5t possible with H-certificate +++ Fresh inspection carried out with brake fluid change, lubrication, and new fuel filters. Additionally, the air dryer cartridge and wiper blades have been replaced. Both starter batteries renewed, and fluid levels of all components checked and topped up as necessary. The front-mounted pump has been removed; the openings in the radiator grille and bumper were professionally sealed. Kdodpfxey I Huwe Af Hot This 1113 runs very well and is ready for immediate collection. 9 seats (private registration as a truck allows for 6 seats), All-wheel drive 4x4, center and rear-axle differential lock, towing ring 1.5t. Transfer case with off-road reduction and differential locks, walk-in equipment box with equipment mounts, Wheelbase (axle spacing) 4,200 mm +++ Maximum speed according to documents: 85 km/h, actual speed by GPS: 88 km/h Cabin interior dimensions behind the driver’s seat (LxWxH) in mm: 1560 x 2180 x 1460 Box exterior dimensions (LxWxH) in mm: 3130 x 2400 x 1500 Box interior dimensions (LxWxH) in mm: 3050 x 2400 x 1450 —Subject to change, prior sale, and errors— ?191?

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration Kdsdpeyaqinjfx Af Hot • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change tool post Machine Benefits Technical Machine Benefits • Distance between centers / turning length: 5000 mm • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: new, functionality: fully functional, power: 2.3 kW (3.13 HP), fuel type: gasoline, color: yellow, operation weight: 70 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 68-4 A Rammer – NEW Wacker Neuson BS 68-4 A Rammer – NEW | 689 blows/min | 70 kg operating weight | Impact force 19 kN | Honda GXR 120 petrol engine | 28 cm shoe width Kdjdpfx Afezh D A Nj Hst Item number: 5100068375 Technical Data: Manufacturer: Wacker Neuson Model: BS 68-4 A Condition: NEW Operating weight: 70 kg Blow rate: max. 689 strokes/min Impact force: 19 kN Engine: Honda GXR 120 petrol engine Engine power: 2.3 kW Starting system: Recoil start Shoe width: 28 cm Highlights & Equipment: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low maintenance - Shoe width 280 mm – other sizes available - Compact design – for precise work in confined spaces - Made by Wacker Neuson – proven quality, immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow areas ✓ Municipal works & construction companies ✓ Fibre optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide and international delivery on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 68-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction equipment for cable & trench work | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! Virtual machine viewing via video call available on request.

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Kedpfszxd E Ssx Af Hjdt Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: excellent (used), Röhm faceplate Kdjdpfjzhridox Af Het in very good condition Diameter 450 mm Mounting method – see image

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 130 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components Kjdpfxsyh H Iyj Af Hedt - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: new, functionality: fully functional, power: 13.8 kW (18.76 HP), fuel type: diesel, color: yellow, overall weight: 1,588 kg, Year of construction: 2026, Equipment: UVV, additional headlights, adjustable chassis, cabin, hydraulics, rubber tracks, Wacker Neuson ET 16 Mini Excavator – Edition A NEW Wacker Neuson Mini Excavator ET 16 – Edition A NEW | Operator’s Cab | Digging Depth 2,413 mm (long dipper arm) | Telescopic Undercarriage 990 mm | Flat-faced Couplers | Work Lights Front & Rear | Incl. Bucket Package & MS-01 Mechanical Quick Coupler Technical Specifications: Manufacturer: Wacker Neuson Model: ET 16 – Edition A Condition: NEW Cab: Operator’s cab Kdjdpszh Hb Isfx Af Hjt Digging depth: 2,413 mm (long dipper arm) Undercarriage: Telescopic undercarriage – width 990 mm Couplers: Flat-faced couplers Lighting: Work lights front & rear Quick coupler: Mechanical MS-01 Bucket package: 300 mm & 500 mm trench buckets, 1,040 mm swivel bucket Highlights & Features: - Edition A – high-quality full equipment for professional use - Long dipper arm – digging depth 2,413 mm - Telescopic undercarriage – ideal for narrow access and high stability - Operator’s cab – comfortable operation in all weather conditions - Flat-faced couplers – fast & clean coupling - Working lights front & rear – optimal visibility for every job site Fields of Application: ✓ Landscaping & gardening ✓ Cable & pipeline construction ✓ Fiber optic installation ✓ Construction & civil engineering companies ✓ Municipal use ✓ Agriculture & yard applications Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Price ex warehouse Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further variants available! ➡️ New & used machines, attachments, and spare parts Buy Wacker Neuson Mini Excavator | ET 16 Edition A | Mini excavator with increased digging depth & telescopic undercarriage | Set incl. MS-01 & bucket package | Wacker Neuson quality Your reliable partner for construction machinery: Claudio Macagnino Baumaschinen & Commercial Vehicles Trading GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we are happy to arrange a virtual inspection of the machine via video call.

Condition: used, Filterplate 600x600 stainless steel Material:  AISI 304 13mm complete with screws Kjdoz A Df Dspfx Af Hedt 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Kodpfx Afeymk E Ao Hjdt Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 181 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3050 H Vibratory Plate NEW Wacker Neuson DPU 3050 H Vibratory Plate – NEW | 30 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item Number: 5000610039 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 3050 H Condition: NEW Operating Weight: 181 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-Heavy Compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction work - Robust construction – ideal for daily jobsite use - 500 mm working width – high surfacing performance in a compact design - Ergonomic guide handle – low vibration & comfortable - Reliable Hatz diesel engine – high performance & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping & gardening ✓ Municipal applications & construction companies Kdodpfxjzh Eb Ts Af Hst ✓ Fiber optic & cable installation ✓ Compaction jobs on small to medium-sized sites Options: Surcharges only available in conjunction with the machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system to record operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app, where it is clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery Germany-wide & internationally on request Prices ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and interim sale reserved. Prices excluding VAT Further models and sizes available! Also DPU 3750 etc. in stock ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson vibratory plate | DPU 3050 H NEW | Diesel Vibratory Plate 30 kN | Vibratory Compactor 500 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Construction Equipment & Commercial Vehicle Trading Ltd. ➡️ Enquire now & secure immediately available new equipment! Virtual machine inspections via video call available on request.

Condition: new, functionality: fully functional, power: 1.8 kW (2.45 HP), fuel type: gasoline, color: yellow, operation weight: 64 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 68-2 Rammer – NEW | 64 kg Operating Weight | 19 kN Impact Force | 2-stroke Petrol Engine WM 80c | 28 cm Shoe Width Article number: 5100070150 Technical Specifications: Manufacturer: Wacker Neuson Model: BS 68-2 Condition: NEW Operating Weight: 64 kg Impact Force: 19 kN Engine: Wacker Neuson WM 80c 2-stroke petrol engine Engine Power: 1.8 kW Starting System: Recoil start Shoe Width: 28 cm Special Feature: Successor to the BS 60-2 Highlights & Features: - Successor to the proven BS 60-2 – with improved performance - Robust 2-stroke engine – powerful & easy to maintain - 28 cm shoe width - Compact design – ideal for confined workspaces - Made by Wacker Neuson – renowned quality & immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal use & construction companies ✓ Fibre optics & network construction Kedpfx Afozh Dybj Hedt Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international shipping available upon request Pricing: ex works Maassenstraße 91, D-46514 Schermbeck (Wesel District) All details without obligation. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates in our range ➡️ New & used machines, accessories & spare parts Purchase Wacker Neuson Rammers | BS 68-2 NEW | Petrol rammer with WM 80c engine | Compaction technology for cable & trench works | Wacker Neuson quality Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new stock! On request, we are happy to offer a virtual live inspection of the machine via video call.

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system Kdodpfxezr Rnyo Af Het -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 160 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW | 25 kN centrifugal force | 400 mm working width | Hatz diesel engine 1B20 with 3.1 kW Item number: 5000610035 Technical specifications: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating weight: 160 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 400 mm Engine: Hatz 1B20 diesel engine Engine output: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty Area performance: approx. 624 m²/h Kodezh D Ncspfx Af Hedt Highlights & Equipment: - Compact diesel vibratory plate, suitable for a wide variety of applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – for precise compaction even in tight spaces - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & fuel-efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-size surfaces ✓ Landscaping and gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized construction sites Options: Surcharge only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as run hours, service intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is provided without guarantee. Subject to errors and prior sale. Prices excluding VAT Further models and sizes available! Also in stock: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Compactor 25 kN | Vibratory Plate 400 mm working width | Hatz engine | Wacker Neuson Compaction Technology | Plate Compactor for Paving Applications Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! Virtual viewing of the machine via video call available on request.

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: yellow, operation weight: 64 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 62-4 A Rammer – NEW | 689 blows/min | Operating weight: 64 kg | Impact force: 17 kN | Honda GXR 120 petrol engine | Foot width: 28 cm Article number: 5100068373 Technical specifications: Manufacturer: Wacker Neuson Model: BS 62-4 A Kodpjzh D D Hofx Af Hjdt Condition: NEW Operating weight: 64 kg Blow rate: max. 689 1/min Impact force: 17 kN Engine: Honda GXR 120 petrol engine Engine power: 2.7 kW Starting system: Recoil start Foot width: 28 cm Highlights & Features: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low-maintenance - 28 cm foot width - Compact design – for precise operation in confined spaces - Made by Wacker Neuson – proven quality & immediately available Application areas: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow spaces ✓ Municipal works & construction contractors ✓ Fiber optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international upon request Pricing: ex works, Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices excl. VAT Additional configurations available! Also available with 15 cm & 25 cm foot plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 62-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction technology for cable trenching & excavation | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! Virtual machine inspection via video call available on request.

Condition: good (used), Year of construction: 2006, functionality: unexamined, Internal article number: 26057 Pneumatic press Manufacturer: Schmidt Machine no.: 27-400084 Year of manufacture: 2006 Pressing force: 20 kN Stroke: 100 mm Safety distance: 348 mm Table: 200 x 150 mm Acceptance diameter: 20 mm Max. distance from table to acceptance point: approx. 270 mm Dimensions (L x W x H): 70 x 40 x 100 cm Kjdpjzx Scxsfx Af Hodt Weight: 60 kg Includes two-hand operation and emergency stop. Attention! The control unit for the machine is missing. The press would have to be operated purely pneumatically. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: used, mileage: 1,900 km, power: 353 kW (479.95 HP), first registration: 05/2026, fuel type: diesel, number of seats: 51, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, onboard kitchen, parking heater, soot filter, 2 in stock - Identical models MAN Lion’s Coach - R07 - 12.10 meters New vehicle, not yet registered - Manufacturer’s warranty 24 months / 12 months Upon request, FULL WARRANTY from MAN - 48 months or 320,000 km from initial registration. We would be happy to send you the detailed specifications by email. Highlights: * MAN engine, 12,419 cc, 353 kW * MAN TipTronic, 12 gears * 49 reclining seats * Driver’s seat + co-driver’s seat * LED headlights * Navigation system * USB ports at all seats * Toilet * Kitchen * All assistance systems * Alloy wheels * etc. Vehicles are available immediately in 85235 Odelzhausen. Driver’s sleeping area * Kitchen * Cooler box * Navigation system * Reclining seats * Auxiliary heater * TV * Toilet Speed regulation: Adaptive cruise control Air conditioning: Automatic climate control * Stationary air conditioning system Safety: ABS * Retarder/Intarder ---- Inspection and test drives are possible at any time! If you have any questions, please do not hesitate to contact us. Visit our website as well. Errors and prior sale are subject to change. ---- Opening hours: Monday - Friday, 9:00 a.m. - 3:00 p.m. Kdedjy T Aygjpfx Af Hot Also available by appointment. ---- Information on data protection can be found at:

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 247 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3750 Hts Vibratory Plate NEW Wacker Neuson DPU 3750 Hts Vibratory Plate – NEW | 37 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item number: 5000610321 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3750 Hts Condition: NEW Operating Weight: 247 kg Frequency: 90 Hz Centrifugal Force: 37 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Starter Compaction Class: Medium compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction tasks - Robust design – ideal for daily construction site use - 500 mm working width – high area performance with a compact design - Ergonomic guide handle – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-sized areas ✓ Landscaping & horticulture ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium-sized construction sites Options: Additional charges only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (District Wesel) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! DPU 5247 etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 3750 Hts NEW | Diesel vibratory plate 37 kN | Vibrating plate 500 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving Kdedpfxszh Ed Uo Af Hot Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we will gladly arrange a virtual inspection of the machine via video call.