Used Powder Coating Equipment for sale (41,888)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Nlsdpfefzccnjx Aiqed Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Nlodpfefz A Iwsx Aiqed Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor Nlsdpfofzciqsx Aiqed A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) Njdpfofzkqmjx Aiqold For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2026, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. Nljdpfx Ajy Htg Djiqjd The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Condition: new, Year of construction: 2025, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES Nlsdpfevv H Uuex Aiqsd The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, HORIZONTAL POWDER COATING LINE FOR ALUMINUM PROFILES We are adding value to your production. * Conveyor speed up to your capacity per day Aerial conveyor - monorail or power&free type Automatized powder coating booth, metal or PVC antistatic structure Reciprocated automatic powder coating equipment system Tunnel type polymerization oven - gas, diesel or electrical heating source Made in Türkiye CE Mark Nlsdpjvv Nh Refx Aiqsd We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET Nledpfovv Rfdsx Aiqod * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, MANUAL POWDER COATING PLANTS AND SYSTEMS Nodpevv Nuqefx Aiqeld Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set Nsdpfx Asxna U Ueiqeld - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery Nlodpfx Asy Tn Atsiqsd • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. The line is located at the parent company in Italy, near the town of Pordenone. Direct contact is possible, upon prior arrangement.

Year of construction: 2014, condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 Nedpfxovxrm Ue Aiqjld - stainles steel cyclone diam.: 500 mm - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray booth 2x2.1x2.2 Overspray during powder coating is collected by the extraction unit. The powder spray booth is delivered on rollers and is therefore mobile. - The extraction unit is equipped with a 60 L powder container (on rollers). - The extraction unit has 4 filters as the first stage. - Above the cabin is the absolute filter. Nlsdpfsfhv Tqex Aiqod 1 Dimensions of the powder booth: Width: 2,000 mm Depth: 2,100 mm Height: 2,200 mm 2 Fan: 1 piece, 6,000 m³/h Electric motor: 3.0 kW 3 Filter Ø 325x600: 4 pieces, type filter cartridges 4 Electromagnetic valves: 2 pieces, 1” “Turbo” Italy 5 Absolute filter: 1 piece, type bag filter

Condition: new, Year of construction: 2026, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. Powder coating booth, open spray booth Overspray during powder coating is collected via the extraction unit. The powder spray booth is delivered on rollers, making it mobile. - The extraction unit is equipped with a 60 L powder container (on castors). Nodpoffwfxofx Aiqjld - The extraction unit has 4 filters as its first stage. - An absolute filter is located above the booth. 1 Dimensions of the powder booth Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 Fan 1 piece, 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pieces, filter cartridge type 4 Electromagnetic valves 2 pieces, 1” “Turbo” Italy 5 Absolute filter 1 piece, bag filter type 2. Powder curing oven 1 Internal dimension Length 4,000 mm 2 Internal dimension Width 1,500 mm 3 Internal dimension Height 2,200 mm 4 External dimension incl. thermal block Length 5,250 mm 5 External dimension incl. thermal block Width 2,050 mm 6 External dimension incl. thermal block Height 2,530/2,750 mm 3. Control cabinet 4. Manual conveying system The "System Mantion" conveying system is designed for a maximum load of 250 kg per carrier and 750 kg per trolley.

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: Booth for chemical pre-treatment (3 zones) with spray manifold Walk-in coating booth Powder gun Powder curing oven Manual conveying system Electrical control Example: (all sizes can be individually adjusted) Space requirement: 30 x 15 meters Part size: L = 6,200 mm W = 2,300 mm H = 2,000 mm Walk-in cleaning booth incl. automatic spray manifold 1 Dimensions of the booth Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the booth complete Length 9,140 mm including tanks Width 5,580 mm Height 4,200 mm Nlsdpfx Aebhh Aweiqod Walk-in coating booth, manual coating 1 Dimensions of the booth Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the booth including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing oven 1 Internal dimensions Length 6,500 mm 2 Internal dimensions Width 2,500 mm 3 Internal dimensions Height 2,950 mm 4 External dimensions incl. thermal block Length 7,600 mm 5 External dimensions incl. thermal block Width 2,800 mm 6 External dimensions incl. thermal block Height 3,100 mm Manual conveying system The conveying system consists of: 1. Support structure, consisting of steel elements, 120x120mm / IPE 160 2. Roller units - No. 9862 GL, 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Roller units - No. 9862 GLHT, 24 pieces 6. Connecting pieces – No. 9061M, 34 pieces 7. Mounting clips - No. 9067/180, 234 pieces 8. Stoppers - No. 9169, 21 pieces 9. Movable locking mechanism - No. 9601 VM, 6 pieces 10. Fixed locking mechanism - No. 9601 VF, 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it, we can control all of the above-mentioned units and consists of: - PLC - Touch screen 5“ color -easy view- - Modem - Thermal magnetic switch, fuse (Telemechanique, Siemens, ABB). - Cables, brackets, pipes, etc.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Nljdpsum Uflsfx Aiqed Powder coating system Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2026, Powder Coating Starter Packages Starter sets or individually designed packages for starting your own business in surface technology, e.g., for coating rims: This package includes two sample setups for starting powder coating or expanding existing businesses. Our focus is on providing individual consulting tailored to the customer's budget and requirements. Modifications and special requests are standard practice. Proven, reliable, and low-maintenance technology is at the heart of our offerings. Set 1: Powder curing oven 2,000 x 1,900 x 2,000 mm (internal dimensions) 150 mm thick mineral wool insulation for the walls, ensuring energy-efficient and cost-saving operation 36 kW thermal output for fast heating times Oil, gas, or electric heating 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to the workpieces Up to 220°C Powder coating booth (open spray booth) Dimensions of the powder booth Width 2,100 mm Depth 2,000 mm Height 2,200 mm Fan 6,000 m³/h electric motor 3.0 kW for a clean working environment Filter ø 325x600 4 pcs. Type filter cartridges with interval-controlled self-cleaning Post-filtration via bag filters Wagner powder coating system, manual system "Sprint 2 B" Current model from the premium manufacturer Wagner for perfect coating results (other brands available on request) Corona hand gun PEM-C4 Ergo Control unit EPG-Sprint Conveyor system with Fluidkrone ST 550/10 Powder injector PI-F1 Equipment trolley with vibrating table Set 2: Powder curing oven 1,500 x 1,200 x 1,750 mm (internal dimensions) 150 mm thick mineral wool insulation for the walls, ensuring energy-efficient and cost-saving operation 14 kW thermal output for fast heating times Electric heating 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to the workpieces Up to 220°C Powder coating booth (open spray booth) Dimensions of the powder booth Width 1,200 mm Depth 1,100 mm Height 2,380 mm Fan 2,500 m³/h electric motor 1.1 kW for a clean working environment Filter ø 325x600 2 pcs. Type filter cartridges with interval-controlled self-cleaning Post-filtration via bag filters Wagner powder coating system, manual system "Sprint 2 B" Current model from the premium manufacturer Wagner for perfect coating results (other brands available on request) Corona hand gun PEM-C4 Ergo Control unit EPG-Sprint Conveyor system with Fluidkrone ST 550/10 Powder injector PI-F1 Equipment trolley with vibrating table Nedpfjbqk Nbex Aiqsld

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder spraying booth (pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder spraying system (small series, mixed colors) with guns Cyclone separator Nledpeyhbdfjfx Aiqsd Block gas-heated water drying furnace. drying and baking furnace (incl boiler) The powder-coated workpieces are fired in a natural gas-heated powder firing furnace Cooling after water drying Cooling after powder firing Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C Nodpfx Aow Snm Usiqold GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Condition: new, functionality: fully functional, Cooling capacity Njdpfx Aiew Snbfeqsld • Throughput 800 kg/h • Product inlet temperature 140°C • Product end temperature

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Nledpfsw Snlwsx Aiqed • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: new, functionality: fully functional, The BBACooler model CCC-95/60 is a compact drum cooler for cooling and solidifying of viscous products. Cooling capacity • Throughput 450 kg/h • Product inlet temperature 140°C Nledew Sm Epepfx Aiqsd • Product end temperature

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,266 mm, total height: 2,847 mm, total width: 1,062 mm, warranty duration: 24 months, power: 1.5 kW (2.04 HP), input voltage: 380 V, filter area: 11 m², energy consumption: 2 kWh, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Available immediately ⚡ Professional support! ✈️ The stated price is the gross price including VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty Available from stock – no production waiting time ⭐ Matech Powder Booth – MATBOOTH.FT-01-S MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT-01-S is a compact powder coating booth for professional manual powder coating of small and medium-sized workpieces. The S version is particularly practical for applications where the workpiece is inserted into the booth and coated within the booth. The workpiece can be pushed into the working area using the suspension device on the booth. This makes this version particularly suitable for applications with more intensive powder application. Thanks to the special fan motor housing, this booth enables comfortable and quieter operation. ☘️ Available immediately ☘️ Compact ☘️ Clean coating ✅ In-stock item – available immediately ✅ No waiting time for production ✅ S version for coating inside the booth ✅ Workpiece guidance via the booth's own suspension device ✅ Suitable for applications with more intensive powder application ✅ Compact solution for professional powder coating ✅ Quieter operation thanks to the special fan motor housing ✅ Automatic filter cleaning system ✅ Economical use through powder recovery Nodpfx Ajdhi Aaeiqeld ✅ Individual adaptation possible through various additional options ➖➖➖➖➖ Technical features: ✔️ 1 polyester filter ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 liters ✔️ Suspension device for guiding the workpiece into the booth ✔️ Special fan motor housing for quieter operation ✔️ 1 piece 1.5 kW extraction fan ✔️ Extraction capacity: 2500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection needed – with the nano-filter box! ✨ With the optional nano-filter box, you can operate your powder booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly flexible to use – even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ Secure your in-stock item now! This powder booth is currently available in stock (1 unit). Ideal for companies that want to start professional powder coating in the short term or expand their existing coating capacity. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models. Please contact us for leasing, rent-to-own or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from the service and quality advantages! ✨ Request a quote now – make your company ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 24 kW (32.63 HP), temperature: 250 °C, inner dimension length: 2,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 1,800 mm, volume flow: 3,000 m³/h, energy consumption: 28 kWh, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on delivery address. Please contact us for an individual transport quote. ✅ Complete package for professional powder coating ✅ Brand-new, unused industrial products ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after payment received 📦 Please inquire additionally about current stock availability. 🔥 PROMOTION VALID UNTIL 06/06/2026 ONLY 🔥 Package list price net: EUR 23,370.00 Special discount: 15% = EUR 3,505.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-2-W FLEXIBLE TURNKEY SOLUTION FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-2-W, you receive a complete system consisting of an electric powder oven, a mobile powder booth, and a multi-color powder coating gun set. The W-cabinet is particularly suitable for flexible manual coating jobs and is ideal for use in workshops and production lines. ☘️ Mobile ☘️ Flexible ☘️ Ready to use ✅ Complete package with 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06/06/2026 ✅ Ideal for small and medium-sized workpieces ✅ Flexible booth solution for workshop and production ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101620 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.02-W ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101620 Electric Powder Oven ✔️ Electric heating power: 24 kW ✔️ Total connected load: approx. 26 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Blower capacity: 3,000 m³/h ✔️ Timer function and automatic shut-down 🎨 MATBOOTH.FT.02-W Powder Booth ✔️ 2 polyester filters ✔️ Extraction volume: 2,800 m³/h ✔️ 2.2 kW extraction fan ✔️ 360° rotatable workpiece suspension ✔️ Flexible use for manual coating operations 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor design ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option Nlodpjwc Epvjfx Aiqsd ✔️ Powder coating output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional extensions available 🎨 Options for Matech powder booths: ✅ Nano filter box – operation possible without fixed exhaust duct ✅ Undercabinet with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature curves ✅ Save process parameters ✅ Weekly & monthly reports at the touch of a button ✅ Insert shelf or workpiece trolley ✅ Upper rail system for the oven ✅ ATEX version of the oven on request ✅ Double-door / front and rear door versions ✅ Trolley for the rail system ✅ Support legs for the rail system ✅ Custom dimensions on request Rails and beams are not included in the price. ➖➖➖➖➖ 🚀 Secure the promotional package now! This offer is valid only until 06/06/2026. Afterwards, regular package prices will apply. ✳️ Various financing options are available. Feel free to contact us for leasing, hire purchase, or installment payment plans. Enquire now – make your business ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,258 mm, total height: 2,790 mm, total width: 2,370 mm, warranty duration: 24 months, input voltage: 380 V, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty ⏱️ Delivery time: approx. 4 weeks after payment receipt Please also inquire about current stock availability. ⭐ Matech Powder Coating Booth – MATBOOTH.FT.3-L MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT.3-L is a professional powder coating booth for manual powder coating of small to medium-sized workpieces. The L version features a longer base frame, providing more working comfort and advantages for wider workpieces. Thanks to the 3 polyester filters, the high suction power, and the automatic filter cleaning system, the booth enables clean, practical, and economical operation. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ L version with longer base frame ✅ Advantageous for wider workpieces ✅ Compact solution for professional powder coating ✅ Powerful extraction system ✅ Automatic filter cleaning system ✅ Economical operation through powder recovery ✅ Individual customization possible through various optional features ➖➖➖➖➖ Technical specifications: ✔️ 3 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 L ✔️ 1 x 3 kW extraction fan ✔️ Suction capacity: 3500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection required – with the nano-filter box! ✨ Nledpfxjgf A Shs Aiqed With the optional nano-filter box, you can operate your powder coating booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly versatile, even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models so that you can flexibly plan your investment. Please contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from our service and quality advantages! ✨ Proton Maschinenbau offers professional Matech surface technology for industrial applications. Our machines are manufactured to order and delivered as new, unused machines with a 2-year warranty. Special sizes or individual designs are available upon request. We will gladly plan a suitable solution for your workshop. Request a quote now – get your company ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️