Used Sabroe Smc 112 L for sale (64,742)

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Psdpfox Er Uwsx Akfsgk

Condition: ready for operation (used), Heidenhain UM 112 converter . 325 001-01 , SN:10262291A , the item has been completely overhauled and comes with a 3-month warranty , used, normal signs of wear, 100% functional, scope of delivery as per photos Podpex Er U Refx Akfegk

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 112 . 325 001-01 SN:10262291A offered on an exchange basis (Exchange Service). The unit has been professionally overhauled and thoroughly tested, is 100% functional, and comes with a 3-month warranty. The scope of delivery is as shown in the photos. Please note: In the exchange procedure, your defective core/part must not have any mechanical damage such as cracks or breakage, as these cannot be repaired. If such damage is found, an additional charge of €400 including VAT will apply. Pedpfex Er U Dex Akfsgk

Condition: ready for operation (used), Bosch VM 60 / 150 power supply module 1070046009-112 SN:275136, used, normal signs of use, 100% fully functional, delivery as shown in photos. Pgedpfx Akox Eqzpefok

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B in exchange, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange process, your defective core may not have any mechanical damages such as fractures or breakages, as these are not repairable. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 121D, 667 838-01 SN:47635966A under exchange service, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. In both repair and exchange processes, your returned defective unit must not show any mechanical damage, such as cracks or breakages, as these cannot be repaired. If such damage is present, a subsequent charge of €1,000 including VAT will apply. Pjdpsx Er Uqsfx Akfsgk

Condition: excellent (used), Technical data Manufacturer: Zeiss Measuring plate Length = 6000 mm width = 3000 mm height = 350 mm The machine can be upgraded with new software according to customer requirements. Pedjflfwmspfx Akfsgk Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices and subject to prior sale)

Condition: excellent (used), Technical data Manufacturer: Zeiss Measuring plate Length = 6000 mm width = 1500 mm height = 350 mm Pgjdpfx Asflfwnjkfek The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices and subject to prior sale)

Condition: ready for operation (used), Heidenhain UM 112 converter ID 325 001-02 SN 10514965A, professionally overhauled and tested with 3-month warranty, in good condition, 100% functional, scope of delivery as per photos. Podpjx Dwymjfx Akfjgk

Condition: new, Landert Motoren 112-28-MK-FAM2 Liquid cooled engine, SN:89289/002 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pedpfxji D I Eme Akfogk

Condition: ready for operation (used), Baumüller GNAF 112-LV direct current shunt motor without encoder, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo. The agreed sales discounts do not apply to this item. Please request the price separately. ATTENTION: Please enquire separately about costs for packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Pgedpfx Akjwn R A Eofjk

Condition: ready for operation (used), Rexroth / Indramat MAC071C-0-GS-3-C/095-L-0 Permanent Magnet Motor MNR: R911248879 SN:MAC071-57295, used, normal signs of use, 100% functional, scope of delivery as per photos Pedpfx Aei D Nbiskfsgk

Condition: ready for operation (used), Baumüller GNAF 112 LV direct current motor SN:89104776, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pgsdpsi D E Eajfx Akfsk

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Pedex Hp Hgjpfx Akfjgk Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Psdpsw Tfw Hofx Akfjgk Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle Pedjwqc T Uopfx Akfsgk TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: used, mileage: 9,900 km, power: 85 kW (115.57 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,021 kg, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 94650A Equipment Lines and Packages * E1K Navigation Package * I2W Without special superstructure manufacturer module * I4V Without Chrome Package * PZ5 CONSTRUCTION SITE Package * F2U Parking Package * Z1L PURE STANDARD * SA8 Seat Comfort Package * F2W Winter Package Exterior * 3 months holding period from first registration * GK6 6-speed manual transmission * I44 16" steel wheels * R2D 40.6 cm (16") steel wheels with hub covers * I48 Sliding door rail cover, black textured * Z01 Standard version * F68 Exterior mirrors heated and electrically adjustable * RD9 Tires without specified brand * IK7 Exterior mirror indicators in halogen technology * XE8 ECO Catalyzer 90g * MT8 EMISSION CLASS EURO 6E M/N1 GR. II * CU2 Raised chassis with underride protection * F49 Heated windscreen * RM0 All-season tires * W50 Rear wing doors 180 degrees without windows * IL1 Domestic code * X5B INTERNAL CODE AC1B2 * IF6 Panel van * HX1 Refrigerant R-1234yf * XF8 Model generation GSR2B * I3L Without trailer coupling * I07 Without entry sills * I2S Without painted add-on parts * I1Z Without charging cable for traction battery E-Cell * I2B Without PTC element * I4A Without dust kit * I4L Without stone chip protection * I47 Without chrome trim on rear tailgate * Z3T Premium complete wheel protection (3 years) * L12 Headlamps in halogen technology * T16 Sliding door right * P48 Rear mud flaps * I0V 'Commercial' designation * I5N Side wall left * Z10 Standard route version * C61 Bumper, black textured * I9K Door handle, black * I5U Underbody protection, steel * IV1 Combustion engine * XC8 VIN visible from outside * DV2 Preparation for roof railing * F4W Windscreen washer reservoir with increased volume * H20 Heat-insulating glass all round Interior * V3L All-weather floor mats * FG1 Armrest with storage compartment * SF6 Driver's seat height-adjustable with lumbar support * FE8 Front electric window lifts * I40 Handle trim, black textured * FQ3 Glove compartment, passenger side, lockable * I5X Basic interior trim * J1F Instrument panel, plastic, black textured * J1B Instrument panel, black plastic * HH4 Thermotronic automatic air conditioning * HI2 Climate zone 2 (moderate) * KL5 Fuel filter with water separator * V4V Plastic flooring in front passenger compartment * CL3 Leather steering wheel * VG0 Centre armrest and door panels, black textured * I23 Without ambient lighting * I46 Without rear seat air vents * I2G Without side window/lift window with electric window lift * I3H Without interior rear-view mirror * I2D Without inner mirror * I3D Without folding table on driver and passenger seatbacks * I8D Without charging socket Psdpfx Aox S Amwjkfegk * I1U Without load protection net * I1W Without third row seats * II1 Without second row seat * I2M Without middle seatbelt in rear compartment * IY5 Without seat-back pockets (driver and passenger) * I2K Without hot air duct to passenger compartment * I14 Without decorative elements * C1J Leather gear knob * I5L Upholstery fabric * H10 Seat heating for driver and front passenger * F58 Mirror in driver's sun visor * I9H Start via ignition key * VH4 Fabric 'Norwich' black * J10 Speedometer km/h * D50 Full partition wall Multimedia * E3N Digital extra: Enhanced MBUX functions * E1E Digital extra: Hard disc navigation * EW6 Digital extra: Remote Services Plus * E4S Digital extra: Smartphone integration * E1D Digital radio (DAB) * EI0 Wireless charging system for mobile devices * JK5 Instrument cluster with color disp

Condition: used, mileage: 31,923 km, power: 150 kW (203.94 HP), first registration: 03/1990, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 3,700 mm, loading space width: 2,480 mm, loading space height: 1,750 mm, Year of construction: 1989, Equipment: ABS, all wheel drive, 1200L water tank +++Quick attack rear right with jet pipe 6-cylinder inline diesel engine with turbocharger and intercooler, 6-speed manual transmission Podpfxswfbhao Akfjgk 4x4 all-wheel drive with selectable low-range gear ABS, fog lights 2x differential locks: center and rear (rear axle + transfer case) 1x auxiliary drive: 1x for the rear FP16/8 pump Very well-maintained fire engine with Ziegler body Ziegler 16/8 rear pump with quick attack rear right 9 registered seats, 2 prepared for breathing apparatus wearers GVW: 12,000 kg according to documents Exterior dimensions: 3,700 x 2,480 x 1,750 (L x W x H in mm) Interior dimensions of rear cab (from driver's seat): 1,700 x 2,000 x 1,540 (L x W x H in mm) Wheelbase (Wheelbase): 3640 mm Tires: 9 R x 22.5 Maximum speed: 90 km/h (GPS) Vehicle runs well and is ready for immediate use. +++ Errors, changes, and prior sale reserved +++ ? 034 ?

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Podpfx Aoxd Td Ujkfegk Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration

Condition: used, mileage: 2,14,535 km, power: 245 kW (333.11 HP), first registration: 04/1985, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained suction and jetting combination unit from the Swiss manufacturer Kaiser. - Scania 112 6x4, first registration: 02/1985, mileage: 214,000 km - Kaiser Kanal Jet Combi - Kaiser M13 vacuum pump - KDU 300 high-pressure pump - Partition wall Pgedpjw Ik Duefx Akfjk - Kaiser suction boom - Hose reel 120 m, 1" - Manual hose reel Financing options available through our partner banks. We are happy to assist you further. Please note: We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory details provided without guarantee. Subject to change, prior sale, or errors. We explicitly recommend and encourage inspection and testing so that the buyer has a clear understanding of the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.

Condition: used, TECHNICAL DETAILS - Bar diameter : 12 maxi [mm] - Bar length : 3200 [mm] Psdpfx Akeuhbl Hofjgk - Pushcart diameter : 10.2 [mm] - Channel diameter : 12 [mm] - Supply voltage : 400 [V] - Machine weight : 600 [kg]

Condition: good (used), functionality: fully functional, • Model: Legi-Air LA404Z-LH-500-112 • Machine type: Automatic labeling and print & apply system • Typical application: Product, carton, and pallet labeling • Features: - Print and apply labels in a single step (Print & Apply) - Precise label positioning at high speeds - Variable label sizes and layouts • Equipment: - High-performance print module (model-dependent: Zebra / Sato / Intermec) - Automatic applicator arm (LH 500–112 Series) Pedpfx Asx Aid Uokfogk - Sensor and safety technology • Benefits: - High reliability for 24/7 industrial operation - Fast label changeover - Compatible with ERP / production lines • Application areas: Logistics, packaging, food, pharmaceuticals, industry • Condition: Standard machine

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Pjdsxbpxiepfx Akfsgk

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine Made in Germany. The world’s highest-class folding machine. Production-ready machine. Infinitely variable feed and folding speed adjustment. 6-cassette module. Elevator feeding (high stack) Additional vacuum head (tremat) Stack delivery. The machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Electronic counter with a batching function and adjustable time between batches. Technical specifications: Maximum format: 350x500mm Weight: 350kg 380V power supply Pgedpeywdrrjfx Akfek

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Pgsdeyv Uvxjpfx Akfjk Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: good (used), For sale: professional hospital transport stretcher / medical trolley by Stryker – Prime Series 1125 Zoom model. The device is used in hospitals and emergency departments for patient transport. This model features the Zoom Drive system, which provides electric drive assistance and greatly facilitates patient movement. Manufactured by Stryker Medical USA – one of the world’s leading producers of medical equipment. The stretcher comes with an adjustable backrest, foldable side rails, and integrated braking and steering systems. ⸻ Technical specifications: • Manufacturer: Stryker Medical • Model: 1125 Prime Series Zoom • Year of manufacture: 2014 Pgodpfx Aeyuqt Nekfjk • Drive: Zoom Drive – electric assist • Maximum load capacity: 318 kg • Lying surface width: 66 cm • Adjustable backrest • Folding side rails • Central braking system • Transport castors for hospital use