Used Stankoimport Typ 18L 80 Bar for sale (31,121)

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Lrsdpfx Abez D Stfe Uot Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm Lrodpfx Asz D Aqzsb Ust adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. Lsdezrwapopfx Ab Uort This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: good (used), Rebuilt by Doornbos 2020 with new Volvo engine, 750bar 80 liter/min, WOMA pump and Hammelmann ES2 control Lodpfovpl Hcox Ab Uort

Condition: refurbished (used), Year of construction: 1992, punching force: 40 t, Mubea / Muhr and Bender MIW 400: - hydraulic profile/bar shear with hole punch and notcher - Punching force 40 tons - Activation via foot switch - Quick-change device for hole punch - completely overhauled Punches up to: Ø 30 in 10 mm Ø 20 in 15 mm Lsdperynzgofx Ab Uert Cuts up to: Round: Ø30 Square: 28 x 28 mm Angle: 80 x 8 mm Flat steel: 100 x 15 mm / 150 x 10 mm Special tools and fixtures on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Lredpfxjykqhfs Ab Ujt Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Lrsdjvw S Rwspfx Ab Uot Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMU 80 P duoBLOCK Control: Heidenhain iTNC 530 Lrsdpfx Aez Dkunob Ust Year: 2007 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 800 mm Y-Axis: 800 mm Z-Axis: 800 mm B-Axes C-Axis Panning head Rapid motion: (X/Y/Z): 60 m/min. Spindle speeds: 12.000 rpm Spindle power: 28 / 19 kW Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table Table size: 900 x 700 mm Max. Table Load: 1.400 kg Equipment Internal cooling: bar Chip conveyor Electronical handwheel

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V Lodpfxezldw Is Ab Uert

Condition: used, all stainless steel Lrjdpfxszzaxts Ab Uot nett width 450 mm 2 motors “JVM GmbH & Co.KG”, Type JD 5 power: 2 x 70 W 230V, 50 Hz GN 11,85 kg Grill opening: dia. 10 mm dimensions (L x W x H) : ± 1.400 x 500 x 410 mm

Condition: refurbished (used), Year of construction: 2009, operating hours: 3,129 h, functionality: fully functional, machine/vehicle number: 020913QA04, control type: manual, actuation type: electric, bar length: 8,000 mm, type of input current: AC, KID 80 TYPE 16 BAR FEEDER, serial number 020913QA04 – 500KG. Year 2009 – EU 400 V 3 – 50 HZ – 3.5A – 5 KA – 806sb10001 – 000si03400. Lredpfx Asznm E Tjb Ujt

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Lredpfx Absyz Dhzj Ust Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. Lredpfx Aoz Ahanob Uot If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Lredpfx Aewmpcnob Uot Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Ljdpfx Aez Alf Ueb Uort

Condition: used, used, top condition, little runcleaned, function-tested, test runmaintenance unit and switch housing renewedpneumatics completely sealedincl. adjustable mini-joint cutter 60 to approx. 95 mmmake Hirschtype LQP 180,year of manufacture approx. 1992For cross processing of mini tines and counter profilesAdjustment to 70/-70 degree bevelLength dimension at fenceWood clamping with bridge 8 barManual feed of saw and milling carriageSafety circuitElectric brake systemWood thickness max. 80 mmWood thickness min. 10 mmProfile depth max. 50 mmSawing unit:- three-phase motor 2.2 kW- spindle speed 2800 rpm- horizontal adjustment 50 mmMilling unit:- three-phase motor 4 kW- spindle speed 6000 rpm.- Spindle length 100 mm usable- Spindle diameter 40 mm- Tool diameter 180 mm- Weight 850 kg- Dimensions approx. 1700 x 1450 mmSpecial accessories:- Digital angle display, completely renewed,org. Elgo- Angle display graduation 1/10 degreeNew price approx. 20,000.00 €Storage location 97447 GerolzhofenHandover in actual condition, as inspectedwithout guarantee and warranty Lredpfevwfvgjx Ab Ust

Condition: new, new ! all stainless steel variable speed Lrjdpfszy Nd Nsx Ab Ujt plc control 2 mixing directions pneumatic inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.640 x 1.370 x 1.890 mm

Condition: ready for operation (used), functionality: fully functional, The Lutetia Type 5 Double Jacketed Tumbler stands out as a highly efficient solution for industrial users seeking precise control over their mixing and maturation processes under controlled temperature conditions. Once integrated into the production line, it ensures consistent product homogeneity while providing accurate management of thermal parameters. This makes it ideally suited for meat processing and value-added product workshops. Thanks to its integrated refrigeration unit, the Lutetia Type 5 with refrigeration group offers optimal temperature control throughout the production cycles. As a result, it minimizes quality variations and improves the consistency of finished products. Additionally, it promotes better absorption of marinades and additives, directly optimizing material yield. Its regular operation also stabilizes production rates, helping to streamline the overall workflow of the processing line. Furthermore, this tumbler is easily integrated into demanding industrial environments. It can be used upstream of cooking, packaging, or further processing stages, making it a key component in continuous and structured production systems. When supplied in a configuration reconditioned by Europ’Équipement, it represents a cost-controlled investment without compromising on reliability. Ledpeyvrtnofx Ab Ujrt Finally, the Lutetia Type 5 Double Jacketed Tumbler offers an excellent balance of technical performance and operating costs, enabling producers to boost productivity while safeguarding final product quality. It is thus designed for operations focused on consistency, profitability, and long-term equipment durability. Technical Specifications – Lutetia Type 5 Tumbler - Maximum capacity: 4,000 kg - Weight: 3,000 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 8.2 kW - Air pressure: 5 bar - Liquid nitrogen pressure: 5 bar - Glycol water pressure: 2 to 3 bar Technical Specifications – Refrigeration Unit - Type: HAE 051 - Year: 2012 - Weight: 260 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 7.7 kW GXHBXS0D

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Overlock Machine DURKOPP ADLER 669-180010 M-TYPE For sale: a professional, specialized single-needle, free-arm (cylindrical) sewing machine from the renowned German brand Dürkopp Adler, model 669-180010 from the exclusive M-TYPE series (ECO version). Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and complete. 🌟 Key features and equipment: 🔄 Movable (synchronous) overlock attachment included: The machine features a professional mechanism where the overlock attachment moves in full synchronization with the needle feed. This guarantees perfect, even edge finishing with overlock without wrinkling or pulling the material – even on tight curves. The cost of such an attachment alone is a significant expense; here, you get it already installed on the machine! 📏 Stitch length up to 9 mm: A wide range of adjustment allows for ideal adaptation of the stitch density – from precise construction seams to long, aesthetic decorative stitches on the overlock. Lrodpfoz Dphyex Ab Uot 👟 Adjustable presser foot stroke up to 9 mm: Manual, convenient adjustment of the presser foot height. This allows the machine to smoothly and without skipped stitches, overcome transverse seams, thickenings, and the joining of multiple layers of heavy materials. ↩️ Convenient manual reverse: A classic, ergonomically positioned lever for reverse sewing enables quick and reliable backstitching and securing the stitch manually, precisely at the desired moment. 📐 Narrow cylindrical arm (Ø 50 mm): A design created for processing three-dimensional elements and closed loops (bags, backpacks, footwear, filters, car side panels). It allows for free sewing where a standard flat sewing machine cannot access. Triple feed (bottom toothed, needle, and top presser foot): Powerful penetration force. The machine easily handles thick leather, synthetic leather, felt, and multi-layered technical materials. ECO version – Reliability and simplicity: The design is free of complicated electronics and pneumatics, eliminating the risk of costly failures of computer components. The machine is ideal for small and large workshops – you simply plug it into a standard 230V outlet and start working immediately (no need to connect a compressor). Energy-efficient motor with needle positioning: A modern drive that operates quietly and consumes minimal electricity. The positioning function ensures that the needle always stops in the selected position (e.g., always at the top or always embedded in the material). 🎁 Included: Dürkopp Adler 669 machine head Original, stable table and stand Installed, ready-to-use overlock attachment Spare bobbins We have several units of this model available. Price upon request. Delivery to the customer by courier is possible.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. Lrsdpoz Enz Isfx Ab Ujt This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: E16732-1, input current: 63 A, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of manufacture 2010 For sale: Avermann SSP-80 SIMPLEX stationary screw press, manufactured in 2010. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of manufacture: 2010 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Lredpfsz Eny Rox Ab Ust Special features: The machine is in good, used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press system, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Lsdez En A Sopfx Ab Usrt Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Lrsdpfjzurz Hjx Ab Uet Weight approximately: 2500 kg

Condition: excellent (used), Condition: used, with normal signs of use, fully functional Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 Set includes: Vetter air lifting bag air hoses with quick couplings transport bag complete set as shown in the photos ⚙️ Technical data: Model: Type 1/13 (VSM 14) Max. lifting force: 65 kN (approx. 7.2 tons) Max. working pressure: 1 bar (14.5 PSI) Lodpfey Af S Rex Ab Uort Nominal capacity: 403 L Air requirement: 806 L Year of manufacture: 2018 🛠️ Applications: technical rescue (fire brigade) lifting of machinery and vehicles service and industrial work emergency situations 📌 Additional information: equipment from a reputable German manufacturer robust and durable construction fast and safe lifting of heavy items sold exactly as shown in the pictures

Condition: used, mileage: 2,71,445 km, power: 157 kW (213.46 HP), first registration: 12/2019, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, emission class: euro6, total length: 7,900 mm, total width: 2,550 mm, total height: 3,200 mm, loading space volume: 30 m³, loading space length: 6,050 mm, loading space width: 2,470 mm, loading space height: 2,030 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, tail-lift, DAF LF 210 FA 4x2 Box Truck with Tail Lift VIN: L492579 Chassis / Attachments: * Wheelbase: 4,300 mm * Leaf / Air Suspension * Tyres: 215/75 R17.5 * Remaining tread: Front approx. 80%, Rear approx. 80% Cab: * 2-seater * Spoiler * Sunroof * Storage above engine tunnel * Air conditioning * Radio with navigation * Reversing camera Body: * PL Fahrzeugbau box body * Underside of body hot-dip galvanized * Dimensions: L = 6.05 m, W = 2.47 m, H = 2.03 m * Load securing beams suspended above * Approx. 30 m³ * BÄR BC1000S4 tail lift Engine / Transmission: * 213 HP / 157 kW // 4,500 cc // Euro 6d * Engine brake * Automatic Lrodpjyv Tkzefx Ab Uot Weights: * Gross vehicle weight: 7,490 kg * Unladen weight: 5,450 kg * Payload: 2,040 kg Miscellaneous: * German vehicle * Main inspection valid until 12/2026 New main inspections / safety tests or weight reductions/increases are possible upon request. We are happy to help you obtain export/transfer license plates; transferring your purchased vehicles within Germany is also possible. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for typographical or transcription errors, changes, prior sale and mistakes reserved! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the marketing of new and used commercial vehicles. On 11,000 m², a wide range of vehicles is available. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them in buying or selling vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export or temporary license plates. Customs formalities We are happy to assist you in handling customs formalities.