Used Uhlmann C100 for sale (262)

Condition: ready for operation (used), Baldor BSC1005-24-HR servo drive INPUT 320VDC ID/No: 21137B Serial number: 1295MG24824, used, in good condition, fully functional, scope of delivery as shown in the photos. Dkedpfx Aaoy Npy Ss Nel

Condition: ready for operation (used), Baldor DBSC1005-GAAW-2 servo drive INPUT DC320V ID/No: ASR28687G Serial number: 4699MG17225, used, in good condition, 100% functional, delivery as per photos. Dkjdpfx Aey Np Dkea Njl

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Dsdpfx Aaey H Igrj Nekl Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° Dkjdpfx Asiau Uuoa Njl total power requirement - 50 kW weight of the machine ca. 6 t

Condition: used, Year of construction: 1986, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TRC-100 in good technical, fully working condition, incl. 1.500 mm 4-jaw chuck. Technical specifications: - turning diameter in bridge recess: 1500 mm - total turning length: 1000 mm - turnig length in the gap: 480 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm Dksdpey Efbwofx Aa Nsl width: 2130 mm height: 1400 mm total weight: 8000 kg

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Dksdpfxjvt Rwue Aa Njl Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Dedpfxovvkqgs Aa Nokl Storage location: Nattheim

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Dksdpfx Aaexpv Adj Njl Weight: approx. 240 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm Dsdoy Hp Rrjpfx Aa Nskl - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Dedpoy A Exkofx Aa Njkl Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Dkodpevf E Avefx Aa Nol Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, total length: 6,430 mm, Year of construction: 2025, load capacity: 15,000 kg, Crane Dedpoyvk Nbofx Aa Nekl JMG MC 100.08 Drive Electric Year built 2025 Lifting weight (kg) 15,000

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm Dkedpoy Iydrjfx Aa Njl y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG • Wavelength: 1064 nm • Beam quality (M²): 13 (6 kHz, MM); Dedpfx Aox Sz Efja Nokl

Condition: used, Year of construction: 1983, operating hours: 6,270 h, power: 70 kW (95.17 HP), Equipment: all wheel drive, cabin, front linkage, * Manual transmission * Front and rear hydraulics & PTO shafts * Front and rear lift arms Dksdpfsy Rdgpex Aa Nsl * Cab with 2 seats * Drawbar coupling * First registration: 17/08/1983 * Operating hours: 6,270 h ----* Front tire size: 520/75R26 * Rear tire size: 520/75R26 * Technical total weight: 7,000 kg * Curb weight: 4,280 kg * Overall length: 4,480 mm ----Vehicle number: 12039----Subject to errors and prior sale----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requirements and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * TÜV/roadworthiness inspection * Complete export processing * Financing arrangement * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Dksdey D N Aiopfx Aa Nol Technical Specification Taper Size SK 40

Condition: new, functionality: fully functional, power: 220 kW (299.12 HP), fuel type: electric, color: other, Year of construction: 2026, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance Dedpfx Asyzw N Eoa Njkl • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2019, functionality: fully functional, Equipment: type plate available, Technical Data - KEYENCE XM-1000 Additional Equipment • Measuring head incl. 1 probe with probe tip (4mm) • Measuring head incl. 1 probe with probe tip (4mm) • CAD add-on software Dkodpfx Aaew Svc De Njl • Extension cable • Mouse, keyboard and user manual in English and German Additional Information Machine Benefits o Technical machine benefits: Can be tested on site.

Condition: excellent (used), ABB DSQC1000 or DSQC1018 Main computer,20% discount at order more then 1 unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Dkodpexq Tt Asfx Aa Njl

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dkodpfstrd N Ejx Aa Nol Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-671-2399 Horizon VAC 100A + SPF200 + FCA 200a, Year: 2012 total counter: 11 mio. equipped with: - 1 stations type VAC 100 a - short belt delivery - Trimmer FC-200 A - Stitching and folding unit SPF 200 A - 1 collating tower VAC 100 a - 2 stitching heads Hohner - monitor Dedpfx Aajywhczs Njkl --> available: 04/2026

Condition: used, power: 1 kW (1.36 HP), axle configuration: 4x4, Year of construction: 2002, operating hours: 7,818 h, Equipment: all wheel drive, Empty weight: 1 kg Dkodpfx Aoy Ivzaoa Njl Please contact Emal Jaweed for more information

Condition: used, - air suction collator VAC-100a Horizon VAC-100a air-suction collators - technology: touch & work - model: air-suction collator - bins: 10 each collator - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/qm - loading height: 55mm/ bin - production speed: max. 9.500 cycles/h Bwjbklicou Sr Amjkrek - power: 230V/50Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: 310kg includes Stacker Format: 500 x 350 mm Equipment: Horizon Stacker Receiving Tray with Right-Side Delivery, ST-20R air suction collator VAC-100a Technology: touch & work Dodpfxjv Haale Aa Nokl model: air-suction collator bins: 10 each collator error avoidance: misfeed-,doublefeed- and jamming control saveable jobs: 9 memories for repeat orders extensibility: up to 6 collators (60 bins) stack opportunities: flat or laterally shift

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Dkedpfx Ajx Tdp Noa Nol extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2005, operating hours: 41,059 h, machine/vehicle number: 12831, with 30 tool changers, spindle speed: 5,000 rpm, travel paths: X/Y/Z: 2,500/1,000/770 mm, control: HEIDENHAIN iTNC530, 1 chip conveyor, 1 coolant/lubricant filtration system, operator display, magnetic clamping plate approx. 2,000x800 mm, 2-piece, weight: 21,000 kg, without machining tools, according to information: inverter for Z-axis out of order. Operating fluids are included in the auction lot and must be taken by the buyer or disposed of properly. Dodpfx Aeyztgtja Njkl