Used Urbas Urbas Ur-Rr-500 for sale (24,525)

Condition: used, Year of construction: 2006, Arbeitsbreite 25 - 260 mm Arbeitshöhe 10 - 150 mm Nljdpfozg U Utex Ab Uog Tischlänge PowerGrip 3000 mm Werkstücklänge180 - 4500 mm

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Nljdsuxfu Nopfx Ab Uog Pr...

Condition: used, Year of construction: 2001, Lippert belt conveyor GF10250-650-500 RA1394 Njdpfx Absk Aa T Ue Ujlg The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 10.250 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converter up and down Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT 10 ENBU Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant Nsdpfx Abezvwpls Uolg shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: excellent (used), functionality: fully functional, mileage: 6,79,000 km, fuel type: diesel, empty load weight: 13,400 kg, overall weight: 44,000 kg, axle configuration: 3 axles, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, loading space length: 7,800 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, airbag, blind spot assist, cruise control, electronic stability program (ESP), full service history, lane keeping assist, parking heater, power assisted steering, retarder, seat heater, traction control, VOLVO FH13 500 6X2 26T EURO 6 VOITH RETARDER TOW HITCH AIR CONDITIONER Nodpfez Du Eqox Ab Uslg HEATER DAY/NIGHT COOLING SYSTEM 3-TIER ALUMINUM CARGO BOX TAILGATE LIFT I-SHIFT VOLVO AUTOMATIC TRANSMISSION REFRIGERATOR GPS CAMERA

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 Nljdok Aa U Iepfx Ab Ujg RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Nodpfxsk Abb Us Ab Uslg Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Nedpfx Abjy S Shwo Uolg Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Nodpfxsk Abbfo Ab Uolg Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Njdpfxsz Et E Eo Ab Uelg The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Nsdpfx Aoy Shc Deb Uolg

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 Nljdpfx Ajzniq Eeb Ujg 6 axles Location available upon request.

Condition: used, mileage: 34,043 km, power: 395 kW (537.05 HP), first registration: 01/1999, overall weight: 55,200 kg, fuel type: diesel, color: white, empty load weight: 26,400 kg, gearing type: automatic, suspension: other, Year of construction: 1999, operating hours: 34,043 h, Equipment: additional headlights, air conditioning, hydraulics, parking heater, Towbarless PushBack: - Goldhofer - AST-1 A500 - Year of construction 1999 - 34,043 operating hours - Liebherr D9408 TI-EA3 engine, 8 cylinders, 395KW, 17.180ccm, Configuration: 988 1201 Nljdpsqxt I Tefx Ab Uog - Hydrostat (Vmax 30km/h) - Unladen weight: 26,400kg; permissible GG: 55,200kg - Air conditioning - Auxiliary heating - Swivel seat system - StrobeLights left / right Aircraft types: Airbus: - A200 - A300 - A310 - A330/340 - A500 - A600 Boing: - B747 - B767 - B777 - B787 McDonenell Douglas: - DC-10 - MD-11 The pushback is currently running in the "emergency driving program" - a data transmission error is displayed You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), Year of construction: 2007, operating hours: 16,500 h, Linde H35D duplo440 / side shift / fork adjuster / 2007 / 16,500 hours DIESEL A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-Nuland. Nljdpfezyaursx Ab Uog Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, Year of construction: 1987, Trailers with loading ramps for the transport of construction machinery and equipment. Special design: side-tipping. Nsdpfxezb Nkgj Ab Uslg

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Nlsdpfx Absy Nyqzs Uog Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 1810-650-500 RA1438 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1810 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Nsdpfx Abek Abaps Uolg Supports Side guides Prices plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: Nlsdsuxftropfx Ab Ujg -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Year of construction: 2018, condition: like new (used), functionality: fully functional, WALTER TD500 KBA Circular Saw | Year 2018 | CE | After Inspection | Very Good Condition | KALISZ WALTER TD500 KBA circular saw – a robust and efficient machine designed for longitudinal trimming of round timber. The unit is in very good technical condition, has undergone inspection, and is ready for operation. This machine is ideal for sawmills and wood processing plants, providing high performance and precise cutting. TECHNICAL SPECIFICATIONS: - Manufacturer: WALTER - Model: TD500 KBA - Year of manufacture: 2018 - Condition: very good - After technical inspection - CE certificate - Operating manual included - Infeed table: 6 m (3 m standard + 3 m extension) - Main motor power: 22 kW or 30 kW - Feed motor: 1.5 kW - Length of infeed table: 6000 mm - Maximum log diameter: 350 mm - Minimum log diameter: 60 mm - Adjustable feed speed via frequency inverter - Feed speed range: 0–25 m/min - Two rows of pawls - Saw blade diameter: 500 mm - Spindle diameter: 70 mm - Spindle support - Chip conveyor - Three receiving rollers - Suction ports: 2 × 200 mm Machine advantages: - Renowned manufacturer WALTER - Very good technical condition Nlsdpjz A Aytjfx Ab Ueg - After inspection – ready for operation - Long, 6-meter infeed table - Smooth feed speed adjustment via frequency inverter - High performance and durable construction - Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT.

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, Nlsdpfx Ajyz Rvxjb Ujg · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Nlsdpfx Asyyzv Tob Ueg

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speed Supports Side guide one and both sides Njdpfx Abek Abahj Uslg Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Njdsk Abbuspfx Ab Uolg Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2002, Operating hours: approximately 39,000 hours. Nljdpfx Abjzcvvfs Usg

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 780-650-500 RA1450 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Nsdpfx Abek Aa Tms Ujlg With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics