Used Weingarten Ars 63 for sale (4,539)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter Hfodpfx Adou Rwa Iepol - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Hjdpfx Adouqc Enjpofl Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm Hfodpfx Ascxxwcedpel dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, mileage: 3,78,000 km, power: 243 kW (330.39 HP), first registration: 03/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, soot filter, Manufacturer Mercedes Model Econic 2633 6x2?4 Hvidtved Larsen SLP309 Euro 5 Year 2014 Hodpfx Adsxu Takspofl Condition Very good Serial Number WDB9576601V234612 Ref. nr. 568018 Reg. date: 18-03-2014 Last seen: 30-07-2025 Hk: 330 Km: 378000 Gearbox: Alison Automatic Eurotype: Euro 5 EEV Diesel tank: 1 Tank liter: 400 Rear view camera: ? Air conditioning: ? Plushing: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 295/80 Cover% left 100 - 80 - 50 % Front suspension: Air Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Net weight: 15900 kg. Load capacity 10100 kg. Manufacturer: Hvidtved Larsen SLP 309 Tank capacity: 9000 liters. High pressure pump: Uraca P3-10 High pressure capacity: 127 l/min 160 bar. High pressure pump hours: 1420 Vacuum pump: CVS Vacustar 1600 Vacuum capacity: 26.667 l/min. Vacuum pump timer: 3621 Remote control: ? Water heater: ?

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm Hfodpetycdksfx Adpsl total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled Hodpfx Aetqm Dmjdpefl - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m Hfodpecubatofx Adpjl - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Hjdpsxvqnbefx Adpsfl Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Year of construction: 1966, condition: good (used), Used, well-maintained eccentric press, Weingarten, with pneumatic retraction, piece counter, documentation, Hjdpfxeir I Sle Adpefl press test book, spare parts (2 pallets). Pressing force: 1500 kN (150 tons) Stroke: 60 mm Ram, small/large stroke: 10 – 140 mm Overhang: 550 mm Cylindrical mounting: 30 mm Table width x depth: 1200 x 1000 mm Dimensions width x depth x height: 150 x 270 x 290 cm Weight: 13,500 kg Technical data and dimensions: Subject to change without notice.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Hsdpfxjqrqz Ae Adpofl Overtravel time: 80 ms Safety distance: 128 mm

Year of construction: 1958, condition: used, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm ram surface 500x400 mm hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t dimensions of the machine ca. 2200x2000x3600 mm Hfodpjlp U Ebefx Adpjl

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm Hedpfx Adjxh Swhjpofl table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm Hsdpolp U Ddefx Adpjfl no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1962, condition: used, pressure 10 t Hodpslp U Nbjfx Adpsfl throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min ram - range of adjustment 40 mm table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Hodpoyutvyofx Adpefl Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, pressure 100 t Hfjdpoyuttrofx Adpsl passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow-ground gear -Gear: Spur gear with hollow grinding, 63 teeth -Bore: Ø 40 x 45 mm -Dimensions: see photos -Overall dimensions: Ø 134 x 60 mm -Weight: 1.8 kg Hsdpfx Aewzudgjdpofl

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 Hfjdpfx Aewnhy Ijdpsl - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes Hodpfx Aozw D Dfedpsfl 630 kN --- ---

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 776 operating hours Hfsdpfjzk N I Nex Adpsl Features and Technical Specifications: - Motor: 18.5 kW - Rotor diameter: 248 mm - Hopper opening: approx. 620 x 800 mm - Standard screen - 30 cutting blades, 35 x 20 mm - Screen aperture: 20 mm - Suction port: 160 mm Dimensions: approx. 1730 x 1160 x 1650 mm Weight: approx. 1100 kg Availability: available shortly Location: Röllbach

Condition: used, functionality: unexamined, Ferwood Code: RU0011862 - Manufacturer Code: 4-070-01-0901 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 9KG, 46X39X27 Hfjdpfx Aeylbccjdpol

Condition: used, functionality: fully functional, Condition: Used - Functionality: Fully functional - Compatible machine: CNC CMS AVANT - If interested, we offer overhaul service, contact us. Weight and dimensions for transport: 5 kg, 36x26x21 cm. Hjdpfx Adevu Akpspjfl

Condition: used, mileage: 4,99,999 km, power: 425 kW (577.84 HP), first registration: 09/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, parking heater, Vehicle No.: 172-26 Mercedes-Benz 3358 LS Arocs 6x4 HEAVY-DUTY Hydraulic system for low-bed trailers Mileage: 508,757 km * First registration: 09/2017 * EURO 6C * Wheelbase: 3,300 mm * L ClassicSpace cab * Engine: OM473 * TURBO-RETARDER coupling * Drivetrain >120 tons * Auxiliary drive * Pump: MB 131-2c * Transmission: G 330-12 * High-Performance Engine Brake * Differential lock, rear axle * Saddle height: 1,400 mm * Disc brakes, rear and front * 1 x sleeper berth * Refrigerator box * Auxiliary water heater * Air conditioning * Lane Keeping Assist * Distance Keeping Assist * Active Brake Assist 4 Hedpfx Adozc Sq Sopjfl * Rear tire condition: 70-80% * Front tire condition: 50% * Next inspection: 10/2026 * Next emission test: 04/2027 * German vehicle Inspection possible during our opening hours at any time, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without warranty – errors, changes, typos and prior sale are reserved. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask that you take note of them.

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Hedpfx Adsh Tfqhjpefl • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 63 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 1,350 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Mast type: Duplex Transmission: Automatic Condition: Like new Technical condition: very good Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Hfodpfx Aeyk I Upedpol Rear tire condition: 80 - 100% Battery voltage: 24V Battery year of manufacture: 2020 Description: Price includes a new safety inspection (UVV). The unit is in like-new condition, reflecting its few operating hours. Battery has been regenerated using a power cycler, including a Kappa test, resulting in 85% capacity (see last image). Charger integrated. We can arrange cost-effective transportation for you. Lease-to-own options are available! We are an official partner of Jungheinrich Germany. Full free lift, CE certified.