Used Yaskawa Lathe / Milling Machine for sale (65,153)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm Cjdszh Hxaopfx Af Asrd dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 630 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TRP-93/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 930 mm - turning diameter over support: 630 mm - turning diameter in bridge recess: 1150 mm - spindle bore diameter: 105 mm - power drive on upper compund slide for cone and taper turning - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 1600 mm height: 1600 mm Credpjzht I Iofx Af Aod total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Codpfxor A Eq Rj Af Aord Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm z-travel 400 mm Control Siemens 840 D total power requirement 84 kW weight of the machine ca. 19 t Cjdpey S Eczjfx Af Ajrd dimensions of the machine ca. 7,9 x 6 x 2,7 m

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm Codpfxszi Ex Us Af Aord T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Crsdpswrdu Aofx Af Aed Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Year of construction: 1986, Serial no. 2203-1703, travel range X/Y/Z 500 x 400 x 400 mm, universal milling table 660 x 380 mm (rotatable and swiveling), active digital display, lighting, maximum speed 3,150 rpm, tool vice. Codjzkaq Ijpfx Af Aord +++ ATTENTION: This machine is part of an online auction! +++

Year of construction: 2006, condition: good (used), CNC - lathe machine Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year: 2006 SPECIFICATIONS Max. turning length: 1.250 mm Max. swing over bed: 600 mm Max. swing over slide: 410 mm Spindle bore: 90 mm Amount of controlled axes: 2 Spindle speeds: 3.000 rpm Spindle power: 36,5 / 27,5 kW Torque: 785 Nm Tailstock: MK 5 Quill: 80mm Amount of turrets: 1 Tool: VDI 40/8 Tool capacity: 8 Machine weight: 5.500 kg Req. space (LxBxH): 5,0 x 2,0 x 2,2 m m Equipment Chip conveyor 3-jaw chuck: 315 mm Codpeziyz Defx Af Ajrd Main Spindle: neu gelagert Innenraum neu lackiert Wartungspaket

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Credpjzg Hfwofx Af Aed Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base - Coolant system with tank and pump - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Codpfx Afow Enw Is Ajrd

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Credpfjzgc Rcsx Af Asd Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm Credortqi Ispfx Af Aed - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. Crjdpfx Afetpnyks Asd The exhibition machine is in original condition, therefore you have the full warranty. Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm - Motor 3 HP / 400 V - Weight 276 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Crodpfx Afotpnu Re Aed Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) Crsdpfxju Szr Ue Af Asd - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Hödnerhof Blumenwelt Eichelwang 2 A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm Crsdpezibabofx Af Aed spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine xH: 2,3 x 2,0 x 1,850 m

Year of construction: 2007, condition: good (used), CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Crodpfx Ajzinn Ejf Asd Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: used, Year of construction: 2017, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain table dimensions 1.100 x 610 mm number of tool places 40 Pos. tool taper SK 40 auto power on hours ca. 20.432 h spindle hours ca. 6.642 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle has been reconditioned. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Crsdpfsyn R Ndox Af Aed

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller Codpox Iwg Dofx Af Aord - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier Crjdpfx Aexcp R Usf Ajd - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2023, operating hours: 1,382 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, CNC Milling Machine Manufacturer: EMCO, Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: only 1,382 hours Technical data Manufacturer: EMCO Type: Emcomill E 350 Csdpfx Aozil Rkef Asrd Year of manufacture: 2023 Operating hours: 1,382 h X-axis: 350 mm Y-axis: 250 mm Z-axis: 300 mm Tool holder: SK 30 Tool magazine: 20 pcs Operating voltage: 400 V / 50 Hz Power consumption: 7 kW Spindle speed: 10,000 rpm Workpiece weight: max. 100 kg Slotted table dimensions: L 520 x W 300 mm Dimensions: L 2.50 x W 2.20 x H 2.50 m Weight: approx. 2 t Equipment • Siemens 828 D control system • Enclosed cabin • 3-axis CNC milling machine • Chip conveyor • Tool package with various tool holders • 20-position tool magazine • High-pressure coolant system (8 bar) • Tailstock • Machine documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Csdpjvi R Avofx Af Asrd EU shipping - 350 euro

Condition: excellent (used), Shipping eu 300euro Credpfxol Skk Aj Af Aod

Condition: excellent (used), Shipping within the EU: 350 euros Credel Sklgjpfx Af Aed

Condition: excellent (used), shipping EU ~300euro Crsdpfx Afsl Skk Us Asd