Used Demag Umf71Bx-6Z for sale (707)

Condition: excellent (used), Injection moulding technology module: TX DIAS RX DIAS Ljdpfsqxdnljx Akfeaa PLUS..... 2 pcs control cards Demag

Condition: like new (used), operating hours: 57,410 h, Plastic injection moulding machine - without robot. Clamping unit 35/320 Available KW 35 -2025 Year: 2008 Operating hours: 125433 Pump operating hours: 57410 Clamping Force [kN]: 350/350 Max. mould opening stroke [mm]: 350 Mould height Min./WA211 [mm]: 180/230/280 Daylight between platens max./extended [mm]: 530/580/630 Mould platen size (HxV) [mm]: 460x450 Distance between tie bars (HxV) [mm]: 320x320 Min. permissible mould diameter (k) [mm]: 160 Max mould weight / moving platen [kg]: 440/330 Laodpfowxb Dbjx Akfja Ejector stroke standard/extended [mm]: 100 Ejection / Retraction force [kN]: 33/13 Injection unit 35 Screw diameter [mm]: 22 L/D ratio: 20 Specific injection pressure (up to 400°C) [bar]: 1570 Cylinder head volume, max. [cm³]: 34 Max. shot weight (PS, PE*) [g]: 30 Net weight (without oil) [~kg]: 2620

Condition: good (used), Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V Lodpfxsip Eraj Akfeaa -Dimensions: 980/400/H410 mm -Weight: 255kg

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Lsdpfx Aeyxn Tvokfoaa

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Lasdpomqf Nfefx Akfoa Crane runway made from Demag KBK1 + 2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Lasdpfx Aoyzblwskfsa Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Lajdeyzblqjpfx Akfoa Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Condition: excellent (used), functionality: fully functional, lifting height: 8,000 mm, load capacity: 6,300 kg, DEMAG hoist with trolley Very good used and inspected condition Lsdpfx Akjyy Ngajfeaa Far below manufacturer's new price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts available in our warehouse! Also check my other offers from our stock!

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Ledpfev Uvuhjx Akfjaa Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: new, 4 new DEMAG rope guides P200 P400 P600 P1000 new Ledsyyvggopfx Akfoaa

Condition: excellent (used), 2x identical set DEMAG crab travel motor / crane travel motor Ledpfjyyvd Sjx Akfeaa KBF80 A 8/2 Gearbox AF06 i=53.4 Very good condition

Condition: used, functionality: fully functional, lifting height: 12,000 mm, load capacity: 25,000 kg, DEMAG Hoist DH1063 H24 25 t 4/1 Main lift motor KBH200 B6 Main gearbox DH1000 i= 50 Lajdpfx Akeyyvczofja Micro-travel FG10 Hoist in used, good condition, functionality tested

Condition: new, Lot of 12 DEMAG rope guides 3x DH300 / DH400 82280233 Ljdpoyyvbksfx Akfeaa 3x DH500 / DH600 82380233 3x DH1000 / DH1200 82480233 3x DH1600 / DH2000 82565033

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 trolley hoist Matching spare parts also available Laedpfoyyu S Uex Akfja Year of manufacture: 2007, Reeving: 4/1 Gear ratio i=67 Load capacity: 3200 kg 6 m/min and 1 m/min Very good condition.

Condition: good (used), functionality: fully functional, Year of construction: 1980, lifting height: 7,000 mm, load capacity: 3,200 kg, 2 identical DEMAG electric hoists P416 H7, year of manufacture 1980 All spare parts for P-Zug available as well Laodpfeyyum Eox Akfsa Reeving 2/1 Load capacity 3.2 t Hook path 7 m Main lifting speed 8 m/min Precision lifting speed 0.8 m/min

Condition: good (used), functionality: fully functional, lifting height: 10,000 mm, load capacity: 5,000 kg, DEMAG single-girder trolley with hoist DH312 H12 4/1 i=65 Load capacity 5000kg Lasdpfxeyyulzj Akfja in good used condition

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Lsdpfx Ajyq Dqgskfoaa Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: new, DEMAG brake ring / brake lining / cone brake lining – 50 pieces (new). 1. Type: KB 160 – 4 pcs. 2. Type: KB 100 – 2 pcs. 3. Type: KB 200 – 2 pcs. 4. Type: KB 140 – 2 pcs. 5. Type: KB 125 – 5 pcs. 6. Type: KB 112 – 1 pc. 7. Type: KB 90 – 2 pcs. 8. Type: KB 80 – 11 pcs. 9. Type: No. 405 – 1 pc. 10. Type: No. 616 654 – 5 pcs. 11. Type: No. 620 606 – 7 pcs. 12. Type: No. 612 648 44 – 6 pcs. 13. Type: No. 628 626 44 – 2 pcs. DEMAG brake hood / brake cover – 38 pieces. Various sizes (new / used). Ljdpfx Aeyy Takokfoaa

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm Lasdpfx Ajx D Nx Iekfja This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, functionality: unexamined, Contact us for a quote Ledoyycihepfx Akfjaa

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm Laedpfx Akeyg Nfusfsa • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Laodpjx D Hntefx Akfsa Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn Laedpfxsx D Hnys Akfea • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); Lodox D Nluspfx Akfsaa • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating Laodpfjx D Rqrex Akfsa • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled