Used Eht Trubend 8400 - 35 for sale (10,626)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH, Switzerland Type: BAFAG ATU 35 Ledpfxou Rcz De Ab Uert Power: 3 kW Year of manufacture: 2015 Material conveying device: Manufacturer: Labotek Type: PGT 4-I/MV/MR/P1 Model: 101501 Year of manufacture: 2016 Power: 0.4 kW PRICE REDUCTION FROM 950 TO 750 EUR!!!

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), For sale is a robust and reliable Alzmetall AB 35 S pillar drilling machine, previously used in an industrial setting. The machine is characterized by its stable construction and high reliability, making it ideally suited for workshops, maintenance, toolmaking, and mechanical engineering. Technical data: Manufacturer: Alzmetall Type: AB 35 S Pillar drilling machine Motor power: 2.2 kW Voltage: 220/380 V Multi-stage speed adjustment Drilling table, height-adjustable Foot switch / Emergency stop Condition: Ledpfjzwnrtex Ab Uert Used Dismantled or removed from ongoing operation Good condition, considering its age Sold as is Scope of delivery: Machine complete as shown in the picture Foot switch Accessories according to photos Inspection Inspection possible by appointment. Important terms and conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück Lrsdpfx Aboww Nccs Ust back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. Lrsdozwdamjpfx Ab Uot All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Lrodpfezwpglsx Ab Ujt

Condition: used, machine/vehicle number: 21196, functionality: limited functionality, input voltage: 380 V, pressing force: 35 t, stroke length: 265 mm, throat depth: 400 mm, overall weight: 6,050 kg, working length: 1,600 mm, Manufacturer: Hämmerle AG Designation: Hydraulic press brake Type: AP 35-1600/S4D Model No.: 21196 Year of manufacture: unknown Current condition: used, operational Lrodezl Splopfx Ab Uot Weight: 6 tons Drawings and circuit diagrams are available and will be provided upon purchase. However, a machine manual is no longer available. The machine is available immediately. The sale is ex works: disassembly, removal, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 1971, operating hours: 85,000 h, functionality: fully functional, machine/vehicle number: 20194, working range: 250 mm, feed length X-axis: 170 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,600 kg, total length: 2,000 mm, total width: 2,500 mm, total height: 1,800 mm, input frequency: 50 Hz, input current: 8 A, pressing force: 7 t, compressed air connection: 6 bar, table width: 184 mm, For sale is a Bihler automatic machine, year of manufacture 1971, with approximately 85,000 operating hours. The machine is fully functional and in ready-to-use condition. Bihler automats of this generation are renowned for their extremely robust, long-lasting construction and have been successfully used in industry for decades in stamping, bending, and forming applications. Lsdox Tty Depfx Ab Uort Despite its age, the machine has proven its industrial reliability and remains economically viable for a variety of applications. A significant advantage is the continued good availability of spare parts, both OEM and aftermarket, ensuring long-term maintenance and support. Ideal for series production, as a replacement or secondary machine, or for simple, robust applications. A live demonstration under power is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" Lrsdpfsxaa A Nex Ab Ust * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Lsdpfjx Tii Iex Ab Ujrt Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Lrsdpfx Ajuddh Aeb Ust Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) Lodpozrwntsfx Ab Uort - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm Lrsdpfxjyh E A Nj Ab Ujt 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: new, Year of construction: 2025, functionality: fully functional, Two new SKF piston pumps with reservoirs are for sale. Due to a change in the ongoing project, they cannot be used as originally planned. Lodozt Hqtspfx Ab Uert Manufacturer: SKF Type: PPU-35-2.5W Available quantity: 2 Condition: New, unused, as they are not suitable for our project Lubricants: Oils and greases up to NLGI class II Pre-pressure: max. 30 bar Operating pressure: 4.5 - 10 bar Output pressure: max. 160 bar Adjustable flow rate: PPU-5: 0.1 - 0.5 cm³/stroke, ratio: 1:28 PPU-35: 0.7 - 3.5 cm³/stroke, ratio: 1:25 Compressed air connection (P1): M10x1 Lubrication line connection: for Ø 10mm Suction connection: M18x1.5 Lubricant reservoir: 2.5 kg or 5 kg Level switch for minimum grease level optional Price per unit: €3,350 net

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,382 h, load capacity: 3,500 kg, lifting height: 4,600 mm, free lift: 1,440 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, motor manufacturer: VW, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,975 kg, total height: 2,180 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: diesel, Equipment: cabin, sideshift, LINDE H 35 D - 01 – Diesel forklifts TECHNICAL DATA Lifting capacity: 3.500 kg Lifting height: 4.600 mm Closed height: 2.180 mm Free lift: 1.440 mm Mast: Triplex (3F460) Fork carriage: FEM 3 A Drive: 4-Zyl.-Diesel Engine: VW Tyres: Superelastik 4 x SE 27 x 10 - 12 (70%) / 23 x 9 - 10 (70%) Service weight: 4.975 kg Length: 2.700 mm Width: 1.300 mm Lrsdpfx Abjz Ap Nke Ujt Year of manufacture: 2010 Operating hours: 7.382 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift Internal no.: 1102816 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Lsdpfxezt Itco Ab Usrt Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Ledpewrhwuefx Ab Ujrt

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology Lredsxayl Depfx Ab Ujt - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Lsdpfx Aboy Druue Uort Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1997, operating hours: 13,886 h, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, Toyota 02-6FD35 Triplo 430 Freelift / Sideshift / Fork Adjuster, 6-cylinder Diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Lrsdpfsz Eiu Nex Ab Ujt Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), machine/vehicle number: 9049, LINCK DV 35 prism turner: - Two toothed feed rollers, electrically driven (two separate motors) - Prism rotation, electrically driven (SEW 5.5 kW motor) Lrodpfszrxfyox Ab Ust - Large prism clamping cylinder, MADER KDI-125-0250-A-PPV-M, manufactured in 2017 Very robust machine construction.

Condition: used, Year of construction: 2013, operating hours: 8,413 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 8,413h! Previous owner: German Armed Forces. Rated lifting capacity: 3,500kg. Lifting height: 3,500mm. Duplex mast. Twin tyres on front axle. Fork length: 2,400mm. Hydraulic sideshift. Full cabin. Diesel engine: [30kW/41hp]. Weight: 5,034kg. Good condition! Immediately operational! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors excepted. Cabin Lrodpfx Ajz Dnbfob Uot = Further information = Lifting capacity: 3,500kg Overall height: 250 cm For further details please contact Tobias Ebert.

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 320 t, overall weight: 22,800 kg, Equipment: CE marking, documentation/manual, Used, but in very good condition – TruBend 5320 press brake 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Complete with: i-axis 4-axis back gauge Year of manufacture: 2014 Options / Equipment: Bending aids CNC-controlled crowning system Hydraulic upper and lower tool clamping system Right-side parking position Working length 4100 mm Max. press force 3200 kN / 320 tons Max. stroke 445 mm Lrjdpozamycofx Ab Ust The machine has been serviced and maintained by TRUMPF.

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping Lrodpfxozv Sbij Ab Ujt - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: used, WFL M 35 G MILLTURN is a CNC Turning‑Milling‑Drilling Center delivering high precision, accuracy and reliability. Capacities: distance between centres 2000 mm, max turning Ø 520 mm, spindle bore 77 mm; travels Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Specs: main/back spindles up to 4000 rpm, 29/33 kW (551/630 Nm), driven tools 6/13 kW, milling spindle 9000 rpm 15/20 kW (165 Nm); rapid traverses Z 40 m/min X 30/10 m/min; weight ~20000 kg; size 7900×5700×3250 mm. Accessories: lamp, coolant system, paper filtration, oil mist extractor, chip conveyor, automatic load/unload, Renishaw measurement. Enables tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Ljdpfx Abjz Dv Dbs Ujrt

Condition: good (used), For sale is an Alzmetall AB35S from 1977. Considering its age, the machine is in very good condition and runs perfectly. It is ideal for workshops, metalworking, maintenance, and demanding hobby or commercial use. Spindle speeds (continuously variable): Spindle speed I -> 130-480 rpm Spindle speed II -> 480-1750 rpm Features: - Drill chuck - Continuously variable speed control Ledpfx Asz D E T Esb Uort - Electromagnetic feed coupling, operated via rotary switch - Emergency stop - Machine light The machine has been well-maintained and is ready for immediate use. Inspection and test run possible by arrangement.