Used Faymonville Max100-N-3B-9.30-(Cs)-U for sale (68,417)

Condition: new, maximum load weight: 37,980 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor covering approx. 30 mm thick Loading platform (extendable version): * Loading platform in extendable version with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings installed flat at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood floor covering approx. 48 mm thick, checker plate over the axles Landing legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Fgedpfx Aoy Aufmeg Ajc Tires: * Tires 235/75 R 17.5 3PMSF – brand of our choice TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface in accordance with ISO 11992. For correct display, the towing vehicle must be able to receive and show this data. Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: * Entire steel structure is automatically shot blasted by blast wheel system after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Coating tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX on the front junction strip with 24N, 24S & 15-pin sockets, connection as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the headboard * Yellow-red air couplings on the galvanized front junction strip * 4 wheel chocks with holder at the headboard * Mounting at the rear of the gooseneck for ALU access ramps * Galvanized folding supports under the loading platform chamfer * Gooseneck and rear panel each with a bracket for warning signs including socket left and right * Axle load gauge including load diagram * On the gooseneck, plug-in aluminum side panels and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 3 pairs of WADER C

Condition: like new (used), Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: siehe Bildmaterial, total length: 4,500 mm, total height: 1,400 mm, total width: 1,550 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 50 mm, product length (min.): 400 mm, product length (max.): 600 mm, product width (max.): 400 mm, product width (min.): 250 mm, input voltage: 400 V, working height: 800 mm, We are offering this as-new Smipack / Saropack production line consisting of the GHS1000/400, WS 6000 CS, and T450 (conveyor belt/sealing station/heat shrink tunnel), with all components manufactured in 2022. Last maintenance was carried out in 09/2025. Shrink Wrapper WS 6000 CS Fgjdpoytcc Hjfx Ag Aoc Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 3350 W Current: 14.5 A Conveyor Belt GHS 1000/400 Phase Connection: 1 + N + PE Voltage: 220–240 V Frequency: 50–60 Hz Power Consumption: 370 W Current: 1.8 A Shrink Tunnel T450 Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 8000 W Current: 11.5 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Fsdpjyvnfgjfx Ag Asgc Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: used, New: No Part suitable for: trucks Fgjdpfsytfdmjx Ag Asc Price: On request VAT/margin scheme: VAT deductible Type number: 2232841

Year of construction: 2015, condition: like new (used), Servo-motorised 3G-X-forceps / modular welding gun for robots was mounted on KUKA robots - the adaptation to such is included Electrode force max. 6kN at 500mm radius X-tongs for Cu-arms with diameter 54mm MF transformer 560V / 1kHz, 56kVA Ratio 1:70 - U20, 7.2V with measuring coil 150 mV / kA and thermal switch Servomotor 8-pole 300V - 20kN maximum power Working stroke 95mm + 10mm reserve Fsdsd Eaz Tspfx Ag Asgc PDIV display Resolver 8-pin Spindle pitch 5mm Electrode arm for 3G pliers, projection approx. 400mm with brake (24VDC 1A) as required for KUKA robot Long 90 ° L console complete tube package including control and cooling tubes enclosed

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation Fodpfx Agoyhkrre Aogc * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Fgsdpfxjyhkqzj Ag Aoc Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red Fgsdpfsu Sd U Uox Ag Aec * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 3.790 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm Fedpjw N Nz Iefx Ag Aogc We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2904-3140, Four-sided planer with 8 cutters. Processing speed of 8-25 m/min. Planing width 200 mm, height 140 mm. Fsdpfxoy Tynhj Ag Ajgc 1 horizontal spindle. 2, 3, and 4 vertical spindles. 5, 6, and 7 horizontal spindles, 8 universal spindles. 40 mm shafts, 230 mm heads. 1 motor 7.5 kW, 2nd motor 5.5 kW, 3rd motor 7.5 kW, 4th motor 4 kW, 5th motor 11 kW, 6th motor 11 kW, 7th motor 5.5 kW, 8th motor 5.5 kW. 4 kW gear motor.

Condition: used, mileage: 7,07,318 km, power: 250 kW (339.91 HP), first registration: 08/1999, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro2, color: yellow, brakes: retarder, total length: 11,250 mm, total width: 3,260 mm, total height: 2,500 mm, Year of construction: 1999, Equipment: ABS, cruise control, fog lights, power assisted steering, traction control, trailer coupling, = Additional options and accessories = Fsdpfxsy Hw Hbj Ag Ajgc - Adjusted for handicapped - Autoradio - Double glazing - Electrically operated mirrors - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Portable radio set - Sun visor - Tachograph = More information = Transmission: 5 gears, Automatic Engine capacity: 10.964 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 40% Door count: 2/3

Condition: used, mileage: 5,01,700 km, power: 287 kW (390.21 HP), first registration: 03/2007, fuel type: diesel, number of seats: 49, gearing type: automatic, emission class: euro4, color: white, brakes: retarder, total length: 12,000 mm, total width: 3,400 mm, total height: 2,550 mm, Year of construction: 2007, Equipment: ABS, air conditioning, central locking, cruise control, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Autoradio - CD Fgsdpfx Ajy Ht Uhog Ajc - Climate control - Double glazing - DVD - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Portable radio set - Refrigerator - Sun visor - Tachograph - TV/Video = More information = Transmission: 12 gears, Automatic Engine capacity: 10.518 cc Make of engine: MAN Tyre tread remainder on axle 1: 50%

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four side planer Planing width mm 170 Fgjdpfx Ajg Sa R Dog Ajc Planing height mm 120 Number of spindles 7 Spindle arrangement down/left/right/up/down/universal Electric height adjustment Feed rate from 6.5 to 45 m/min Drive of feed rollers cardan 11 Top pulling rollers

Condition: used, empty load weight: 11,800 kg, maximum load weight: 36,200 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2022, total length: 2,550 mm, suspension: air, tire size: 245/70 R17,5, Equipment: ABS, | Faymonville Telemax F-S43 low loader | 3 axles steered by remote control | Heavy duty lashing points | SAF axles | extendable | Stake pockets | Tires: 245/70 R17.5 | Total weight: 48,000 kg, payload: 36,200 kg | 13,500mm+7,900mm+8,100mm | Subject to error, input mistake and prior sale. Fjdpfjwm I Ipjx Ag Ajgc

Condition: used, empty load weight: 8,681 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/55 R22.5, Equipment: ABS, | Schmitz refrigerated trailer S3B | TK SLXe 400 refrigeration unit | Double deck without beams - beams available on request | Pallet box | Internal width 2.49 m | Internal height 2.69 m | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Diesel hours: 28,394 h | Subject to error, input mistake, and prior sale. Fgodpfxexdn Hqe Ag Asc

Condition: used, mileage: 1,20,328 km, power: 380 kW (516.66 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, crane, cruise control, immobilizer system, navigation system, onboard computer, Mercedes-Benz AROCS 3552 + Epsilon M100L86 crane | Vehicle dimensions: Length (mm): 8,700 / Width (mm): 2,250 / Height (mm): 4,000 | Slew range: 425° | Blind spot assistant | Drowsiness warning system | Distance warning | Speed limiter | Central locking | Multifunction steering wheel | Bluetooth | Touchscreen | CarPlay | Cruise control | Navigation system | Hands-free kit | On-board computer with Check-Control | ABS | ESP | Traction control | Electronic immobilizer | Fog lights | Daytime running lights | Input errors, mistakes, and prior sale reserved. Fjdoy Ep Skepfx Ag Aegc

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Fjdpju R D Sdefx Ag Aogc

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2023, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 49 m³, suspension: air, color: black, gearing type: mechanical, Equipment: ABS, Permissible total weight: 18,000 kg, cargo area (L W H): 7,280 mm x 2,480 mm x 2,750 mm, cargo area volume: 49 m³, air suspension, BDF demountable frame, level adjustment, for sale on behalf of Johann Huber Spedition, 8642 St. Lorenzen im Mürztal. Krone trailer with 1 or 2 like-new demountable bodies, type WP 7.3 LS5-CS, sliding center posts, steel rear wall as a container door, certificate for load securing according to EN12642 Code XL, sliding tarpaulin, errors and changes excepted, for sale on behalf of Johann Huber Spedition, 8642 St. Lorenzen im Mürztal. Krone trailer with 1 or 2 like-new demountable bodies, type WP 7.3 LS5-CS, sliding center posts, steel rear wall as a container door, certificate for load securing according to EN12642 Code XL, sliding tarpaulin, errors and changes excepted. Fgsdpszbwdnefx Ag Asc

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 08/2025, fuel type: gasoline, overall weight: 1,910 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,343 mm, total width: 2,076 mm, total height: 1,827 mm, loading space length: 1,802 mm, loading space width: 1,535 mm, loading space height: 1,262 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 37668---- Errors and interim sales excepted! Fjdjywc Skepfx Ag Ajgc SPECIAL EQUIPMENT * Air conditioning, manual * Cargo area lighting, LED * Continuous rear cargo mat * Wheels: Steel rims 6 J x 15 with 195/65 R15 all-season tyres, suitable for winter * Sliding door, right ADDITIONAL EQUIPMENT * 12-Volt socket in passenger compartment * 2 vehicle keys with remote control, one of which is foldable * Driver and passenger airbags – with passenger airbag deactivation function * Side and front head-shoulder airbags * Exterior mirrors electrically adjustable and heated * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as external temperature display * Double-leaf rear doors without window * Tachometer * Third brake light (with LEDs) * Electronic safety and stability program (ESP) * Electric front windows – driver’s side with quick-down function * High beam assistant * Ford Easy Fuel – comfort fuel cap and misfuelling prevention * FordPass Connect * Rubber mats in driver’s cab * Glove compartment with lid * Interior lighting with delay function and front reading lights * Head restraints (2) * Cargo area lighting * Steering wheel: Audio remote control on steering wheel * Large centre console * Emergency brake light – pulsating brake lights during hard braking * Emergency call assistant * Otto particulate filter (OPF) * Package: Audio Package 2 – Ford SYNC 4 with 8-inch touchscreen – DAB/DAB+ – 4 front speakers – USB port – Bluetooth hands-free and audio streaming – Android Auto and Apple CarPlay (wireless pairing) * Package: Driver Assistance Package 1 – Ford Audio – Pre-Collision Assist (camera-based) – High beam assistant – Lane Keeping Assist incl. Lane Keeping Aid – Cruise control – Intelligent speed limiter with speed limit display – Driver fatigue alert – Wrong-way warning function – Traffic sign recognition system – Rear Park Pilot system * Package: Seat Package 1 – Driver's seat, 4-way adjustable – Passenger seat, 2-way adjustable * Upholstery: Fabric * Radio accessories: front USB ports * Tyre repair kit * Tyre pressure monitoring system * Windscreen wipers – interval function * Seat belts – front seatbelt pretensioners and force limiters – seatbelt warning system for driver and passenger * Sun visor, passenger side with mirror * Sun visor, driver’s side with ticket holder and mirror * Start-stop system * Daytime running lights * Full partition wall without window (steel) * Door handles, black; rear and sliding door handles, black * Variable radiator air intake * Immobiliser * Central locking with remote * Overhead console ... and much more.---- 1 owner. German specification. Errors and interim sales excepted. 2 years manufacturer's warranty from first registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without down payment! Do you have questions? We will be pleased to advise you! Despite existing controls, we cannot rule out the possibility that the vehicle may differ from the above description. Please note that the vehicle description serves solely for the general identification of the vehicle and does not constitute a guarantee in the legal sense of the term. Legally binding are only the agreements in the order confirmation or in the purchase contract. You will receive the exact scope of equipment from our sales staff. Please feel free to contact us.

Condition: not inspected (used), Year of construction: 2010, MERLIN SK 613 Humidification System, approx. 2010 ----- Consisting of: - 1 x Pre-filter and water softener - 1 x Water hydraulics (high-pressure pump) - 2 x Humidity sensors - 6 x Humidifier modules RG - 14 x Humidifier modules MD 1 ----- Original price was approx. €24,000 (excluding installation) (Technical specifications according to the manufacturer, without guarantee!) Fgjdpeyn R H Nsfx Ag Asc

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Fedpevu Hfqjfx Ag Ajgc Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 Fedpjwm D Rtofx Ag Asgc - without jaws -

Condition: used, Used 40HC sea containers are available throughout Germany. Prices vary depending on the location. CONTAINER TYPE: Sea container 40HC Fgodpszcnntofx Ag Ajc DELIVERY CONDITION: Used, wind and watertight, cargo worthy, wooden floor, example images DIMENSIONS L x W x H: According to ISO standard, external dimensions: 12,192 x 2,438 x 2,896 mm, internal dimensions: 12,032 x 2,352 x 2,698 mm, door dimensions: 2,343 x 2,585 mm, volume: 76.2 m³, weight: 4,000 kg TRANSPORT: Please provide your postal code so that we can prepare a free and non-binding offer for containers including delivery and, if necessary, unloading from the truck. VARIETY: In addition, you will find sea containers of all common sizes (20DV, 40DV, 20HC, 40HC...) with us, for every need. Whether as storage, for construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: ready for operation (used), Fanuc A06B-0033-B675 AC servo motor, serial number: C049P1721, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Fgsdpfxox Ip Dns Ag Aec

Condition: ready for operation (used), Fanuc A06B-0061-B003 AC servomotor, serial number: C156F28C3 with pulsecoder A860-2020-T301, serial number: 1752178 / Speed: 4000 rpm 267Hz, used, in good condition, 100% functional, scope of delivery as per photos. Fgodjy Nn Sgjpfx Ag Ajc