Used Fiat Fiat 60 10 for sale (44,590)

Condition: used, mileage: 3,60,000 km, power: 338 kW (459.55 HP), first registration: 02/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: beige, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), VOLVO FMX 460 8X4 FLATBED ? REAR CRANE HIAB RADIO REMOTE ? LEAF-LEAF SUSPENSION ? 10 M CRANE ? ----VEHICLE HISTORY ? VEHICLE HAS FRENCH DOCUMENTS ? VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT ? FLATBED ? REAR CRANE ? 8X4 DRIVE ? AUTOMATIC TRANSMISSION ? ENGINE BRAKE ? CRUISE CONTROL ? DIFFERENTIAL LOCK ? REVERSING CAMERA ? AIR CONDITIONING ? RADIO REMOTE CONTROL ? LEAF SPRING SUSPENSION ? TOOLBOX ? 1 X FUEL TANK CRANE ? HIAB XS 211 HIDUO ? RADIO REMOTE CONTROL ? MAX. LIFTING CAPACITY: 7.1 TONNES AT 2.5 M ? TOTAL REACH 10 M FURTHER DETAILS ? WHEELBASE: 5.70 M ? TYRE SIZE: 12R 22.5 ? TYRES SAME ON ALL 4 AXLES ? TYRES IN GOOD CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR OPERATION ? GROSS VEHICLE WEIGHT: 32,000 KG ? CURB WEIGHT: 17,428 KG ? PAYLOAD: 14,572 KG ----EXPORT / NOTICE EXPORT SALES ONLY WITH DEPOSIT (MIN. 500¤ – 2,000¤) EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ – 2,000¤ Dkjdey I Htmspfx Ai Ten EXPORT DECLARATION EXW POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER STATUS). VEHICLE RESERVATIONS ONLY IN WRITING. ORAL AGREEMENTS NON-BINDING. SUBJECT TO CHANGE, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER UNDER §145 BGB. IT SERVES SOLELY AS A BASIS FOR INITIATING CONTRACTS. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY UNDER OUR GENERAL TERMS AND CONDITIONS.

Year of construction: 2015, condition: used, UniMaster STS 660-10-270 - Year of manufacture: 2015 - Including oil-water separator OWS-Öwasep 1 - Including condensate drain Ecomat 3100 With soundproof enclosure, extremely quiet operation Equipped with refrigerated dryer and bypass line V-belt driven, two-stage, 2-cylinder piston compressor Fitted with rubber vibration isolation mounts for secure placement With intercooler and aftercooler Easily accessible condensate drain valve Additional ports with blanking plugs for easy system expansion (except for the 90 l receiver) Air outlet 3/4" Space-saving vertical design Flexible upgrade options: retrofit soundproof enclosure (for compressors with 4 kW) and/or refrigerated dryer as required Easy and cost-effective vessel inspection through handhole opening Technical Data: Max. pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 520 l/min Drive power: 4 kW Speed: 1025 rpm Tank capacity: 270 l Weight: 170 kg Noise level: 78 dB[A] Air outlet: 3/4" internal Dimensions (W x D x H): 750 x 705 x 1800 mm Availability: short-term Location: Flörsheim Dkjdeyzc R Uepfx Ai Ton

Condition: used, Year of construction: 2009, Charger Dkodpfoync S Dex Ai Tsn

Condition: used, Year of construction: 2009, Charger Dsdpfx Aoync Swei Tokn

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU perm. pressure: 250 bar piston diameter: 100mm Dkjdoyxqmlepfx Ai Tsn piston rod diameter: 60mm stroke: 1200mm

Condition: used, Year of construction: 1998, machine/vehicle number: SV03, Used Automatic Decapper Krones 10 heads year 1998Technical Specifications & Performance DataThe Used Automatic Decapper Krones 10 heads, model 360-10-113, stands as an exceptional choice for your industrial packaging needs. Built in 1998, this robust decapping machine is designed to efficiently handle high-speed bottling lines. With a production speed of 20,000 bottles per hour, it meets the demands of large-scale beverage production. Specifically designed for glass containers, it offers precision and reliability for processing various bottled products including water, juice, beer, and wine.Number of Heads: 10Electrical Requirements: 400V, 50Hz, 8.25ACondition: In StorageManuals: AvailableAdvanced Automation & Control SystemsAt the heart of this used bottling line machine is an advanced control system that ensures precise operation. The automation level is designed to streamline production processes, allowing for seamless transitions between different beverage types. The machine’s control panel features user-friendly interfaces, making it simple to operate while maintaining high safety and efficiency standards. Safety features integrated within the machine ensure that it complies with modern production safety protocols. This decapper operates on 400V with an electrical current of 8.25A, ensuring powerful and efficient operation.Production Line Integration CapabilitiesThe Krones decapping machine seamlessly integrates with other industrial packaging systems, making it a versatile component of any production line. Its capability to handle format changes efficiently makes it compatible with other equipment such as filling, labeling, and capping machines. The machine is engineered to support multi-product flexibility, accommodating a variety of beverage types and container shapes with ease.Machine Condition & Maintenance HistoryCurrently in storage, the Krones decapper is primed for redeployment. Although used, it remains in excellent condition, backed by a comprehensive maintenance history that attests to its reliable performance. Routine maintenance has kept the machine in optimal working order, ensuring longevity and operational efficiency upon return to active duty.Operational Performance & VersatilityThe machine excels in operational performance, offering versatility that meets multiple production needs. It is compatible with a variety of product types, making it ideal for companies that handle diverse beverage manufacturing processes. Its ability to adapt to different container materials, particularly glass, allows for flexibility and ease in switching between product lines, ensuring uninterrupted production.Installation Requirements & Site PreparationProper installation and site preparation are crucial for maximizing the performance of the Krones decapping machine. The unit requires a designated space that accommodates its operation and allows for safe and accessible maintenance. Additionally, utility connections must meet the specified electrical requirements of 400V and 50Hz to ensure optimal functionality.Safety Standards & Compliance CertificationSafety is paramount in industrial packaging operations... Dkodpfx Aevgu D Eji Ton

Condition: new, mileage: 10 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 2,500 mm, fuel: diesel, fuel tank capacity: 400 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: parabolic leaf (spring), loading space volume: 10 m³, Year of construction: 2024, Equipment: AdBlue, EBS, central locking, electric window regulation, power assisted steering, = Additional options and accessories = - PTO - Radio/CD player = Further information = General information Year of manufacture: 2024 Applications: Construction and road building Usable material: Concrete Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Parabolic suspension Front axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 100%; Right tire tread: 100% Front axle 2: Tire size: 385/65R22.5; Steered; Left tire tread: 100%; Right tire tread: 100% Dsdoy H Hifopfx Ai Tokn Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left inner tread: 100%; Left outer tread: 100%; Right inner tread: 100%; Right outer tread: 100% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tread: 100%; Left outer tread: 100%; Right inner tread: 100%; Right outer tread: 100% Weights Unladen weight: 14,673 kg Payload: 22,327 kg Gross vehicle weight: 37,000 kg Functional Body manufacturer: Liebherr 10m3 | HTM1004 | Liftronic EMC | Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Maintenance APK (General Inspection): New inspection upon delivery Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial information Price: On request Warranty Warranty: 12 months = Company information = You can find our complete range here:

Condition: good (used), Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch Dkjdoq Adpfspfx Ai Tsn -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € 125.45 € 60 to Dkjdpfx Aijypbwhj Tjn fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7300 € 140.89 € 60 to horizontal verschiebbar 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg horizontal adjustable cylinder with clamping lever Dkedpfx Aisypbwbo Ton steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW Dksdpfxet D Nz Aj Ai Tsn weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) Dkedex Eabpspfx Ai Tjn - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) Dodpfx Aijx Eaxbj Tokn - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm Dedpfx Aijx D Abpe Tekn - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time Dodevb Hanjpfx Ai Tjkn - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature Dodpfevb E Uqsx Ai Tskn W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Dedpfx Ajtyyn Hoi Tjkn

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Dksdolwxpiopfx Ai Tsn Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale Dkodpex E U Elsfx Ai Ton BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Dkjdpfou Hqh Rsx Ai Ton PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Dkedpfx Asx Itamei Ten Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm Dksdjp Audqspfx Ai Tjn INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, pressing force: 60 t, Equipment: CE marking, documentation/manual, – Capacity 60 tons – Cylinder stroke 250 mm – Working width 1040 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation Dkedewgy Rcspfx Ai Ten – 400 V

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,550 h, load capacity: 3,000 kg, lifting height: 3,730 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,470 mm, battery capacity: 620 Ah, remaining battery capacity: 100 %, battery voltage: 80 V, fork carriage width: 1,145 mm, fork length: 1,200 mm, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), rear tire size: NEW, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tire type: Super elastic Rear tire type: Super elastic Battery voltage: 80V Battery capacity: 620 Ah Battery manufacturer: As-new battery from 10/2025 Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Dodpfeyyrh Tex Ai Tskn Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light,

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Dksdpfx Ajd Ab Iqoi Ten Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English