Used Kelch Vega C for sale (54,727)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Lajdpfxsyxp Twe Abyeg Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Lasdpfx Absziwwioyjg Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Lasdjzgwlzspfx Abyjg Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Lodpfx Ajzrwmiobyeag Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,900 kg, Equipment: documentation/manual, ECKOLD KF 653 C / Power Former & Various Tools / Sets -Reach - Horizontal approx. 600mm -Reach - Vertical approx. 480mm -Working stroke 8mm -Formable sheet metal thicknesses: Steel (Steel N/mm2) max. 6mm Aluminum (250 N/mm2) 8mm Stainless steel (600 N/mm2) 4mm -Ram adjustment approx. 80mm Laodsz Azrwepfx Abyog -Foot switch -Tools (SEE PICTURES) -Sheet metal forming tool description & spare parts lists -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1024610, Paolo Orizio S.p.A. small-diameter circular knitting machine, model TBE/C, machine number 1024610, year 1999. Made in Italy. CE marked. ORIZIO PLATE DATA: · Diameter: 15 inches · Needles per inch: 24 · Number of needles: 1120 · Number of feeders: 4 · Cylinder number: 3-9-286-A · Needles: VO 7950 G0011 · Year: 1999 · CE marking REBUILT BY CANMARTEX IN 2012. The machine has a second plate from CANMARTEX CATGRUP S.L. (Dosrius, Barcelona) with serial number OR610 and marking R2012, corresponding to its rebuilding in 2012. CANMARTEX manufactures circular knitting machines under the Jumberca brand and is located one hour from the current location, making technical service and spare parts still accessible. CANMARTEX PLATE DATA: · Power: 5.5 kW · Frequency: 50/60 Hz · CE marking ORIZIO ELECTRICAL PLATE DATA: · Line voltage: 380 V, 3 phases · Frequency: 50/60 Hz · Full-load current: 16 A · Breaking power: 260 A APPLICATION: Small diameter with 4 feeders: cuffs, collars, ribbons, and finishing for knitted garments. POWER SUPPLY: 50/60 Hz. Both plates indicate 50/60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. EQUIPMENT: · Orizio touchscreen panel with "Yarn Storages" management · Igecom counter with USB port · Control column with start/stop buttons · Complete upper fillet LUBRICATION: Oil indicated on the plate: Optimol Optigear 5150 / Shell Omala 220. Oil change every 2,000 operating hours. CONDITION: Complete and assembled machine. A visit can be arranged for on-site inspection and operating test. Laodpfxozvm Dxo Abyeg DIMENSIONS AND TRANSPORT: · Location: Albacete, Spain.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with comprehensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the depicted ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Laedpfxozn Afpe Abysg Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened; saws have been sharpened; diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e., only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier."

Condition: used, Year of construction: 2002, Pastry line / Processing line Rondo Jumbolino SPF 610 C Year of manufacture: 2002 Condition: functional Includes: cutting rollers, folding shoes, accessories, etc. Double cutting station Dough scrap/waste remover with collection container Spraying device Pneumatic filling device Spreading device Lasdpfsz A Spdox Abysg Infeed roller Guillotine Belt running direction: left Belt width: approx. 640 mm Overall length: approx. 8250 mm

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Laedpfxezz Afie Abyeg Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 40 t, BAYKAL CNC press brake Mod.: APHS-C 125040 Unused SN: 28542 YEAR OF MANUFACTURE: 09/2021 in the following version: - DELEM control system DA-58T 2D-graphics with touch screen - CNC controlled backgauge with ball screws, X-axis 750 mm + 250 mm, R-axis = 130 mm - Manual table crowning - AKAS laser safety device - Safety cover on the side and rear - 2 pcs. Front support arms on linear guides - Top system tool holder - System tool holder at the bottom - Technical documentation - CE version - Colors: * RAL 7015 - slate gray Laodpfx Abjtz Azdsyjg * RAL 7035 - Light gray * RAL 3003 - Ruby red Technical data: - Pressing pressure: 40 t - Working length: 1,250 mm - Motor connected load: 4 kW - Oil tank volume: 80 lt. - Departure speed: 160 mm/sec. - Working speed: 10 mm/sec. - Retraction speed: 130 mm/sec. - Folding length: 1,250 mm - Stand passage: 1,070 mm - Stand depth: 1,470 mm - Table height: 800 mm - Machine height: 2,250 mm - Installation height: 455 mm - Stroke: 215 mm - Table width: 60 mm - Projection: 410 mm - Weight: 3,300 kg Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2010, operating hours: 5,151 h, functionality: fully functional, machine/vehicle number: 343.089, empty load weight: 800 kg, We offer a machine in very good condition, Degraf Concept 201c, year of manufacture 2010. The machine has very low usage—only 5,151 exposures. Complete cabling and piping included. Full documentation available. Everything is operational, ready for use. Integrated all-in-one system for label printing houses and more. It has only been used for the needs of one print shop. Lajdpfx Abjyrr Uioysg For any questions or additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2019, operating hours: 9,327 h, functionality: fully functional, machine/vehicle number: Roboter: 4600-108236 / Steuerung: 4600-108236, overall weight: 654 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600-40/2.55 Type C manipulator and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg with a reach of 2550 mm. It was manufactured in 2019 and has 9327 operating hours. The software version is RobotWare 6.08.00.01. It is equipped with an ABB FlexPendant programming device, a cable set, and the software options Multitasking and HomePosRunning. Lsdpfxezak E No Abyoag

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, usable tank capacity: 3,400 l, Equipment: documentation/manual, Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU, 3400 liters, with jacket and rear triple-blade agitator. Year 2019. Lajdsw U Tx Ujpfx Abyeg Mounted on 3 support brackets. Manhole diameter: 495 mm. Volume Total capacity 3400 L Material Hastelloy C-276 Technical details Year of manufacture 2019 Equipment configuration Agitator Jacket On support brackets Equipment dimensions Internal diameter 1600 mm Cylindrical height 1600 mm Transport information Width 2300 mm Height 3000 mm Weight 1150 kg

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 1,825 h, lifting height: 11,950 mm, empty load weight: 6,550 kg, Telescopic articulated boom lift MANITOU 120 AETJC Year of manufacture: 2009 According to the meter reading: 1,825 operating hours 11.95 meters working height 9.95 meters platform height 7 meters lateral reach 200 kg payload 6,650 kg weight Lajdpfx Abez Dvdhjyeg - Telescopic arm - Articulated arm - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine - On request: new Austrian inspection certificate provided before delivery! Selling price: €7,700 net Affordable delivery also possible!

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option Ljdpfxszrfkvs Abyoag - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Condition: used, mileage: 3,12,097 km, power: 136 kW (184.91 HP), first registration: 06/2006, fuel type: diesel, tire size: 280 / 75 / R22.5, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 4, suspension: steel-air, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 25,000 kg, Year of construction: 2006, Technical information Number of cylinders: 6 Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Make axles: Terberg Brakes: drum brakes Front axle: Tyre size: 280 / 75 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Max. axle load: 25000 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Reduction: hub reduction; Suspension: air suspension Interior Interior: grey History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 1 Lsdpsz D Tlvjfx Abysag Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production Lasdpfx Abey Avg Eoysg • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Laedpfx Asyxyzrebyjg

Condition: used, Year of construction: 2019, operating hours: 9,580 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109272 / Controller: 4600-109272, overall weight: 570 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2019, with 9580 operating hours. Equipped with ABB FlexPendant programming device, connection cable set, and Foundry Plus protection version with “Foundry Plus” marking. Lajdpfozambmox Abyeg

Condition: used, Year of construction: 2022, operating hours: 9,118 h, functionality: fully functional, machine/vehicle number: Robot: 4600-110103 / Controller: 4600-110103, overall weight: 585 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. Payload is 40 kg with a reach of 2550 mm, manufactured in 2020, with 9118 operating hours, and RobotWare RW 6.10.02.00 software. Equipped with an ABB FlexPendant programming pendant, a connection cable set, and a Foundry Plus protection version with a “Foundry Plus” label. Laodpfxozamcws Abysg

Condition: used, Year of construction: 2022, operating hours: 9,652 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109931 / Controller: 4600-109931, overall weight: 585 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg, with a reach of 2550 mm. It was manufactured in 2020 and has 9652 operating hours. The software version is RobotWare RW 6.10.01.00. It is equipped with an ABB FlexPendant teach pendant, a connection cable set, and a Foundry Plus protective version, indicated by the “Foundry Plus” marking. Lajdpfxezamcdj Abysg

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. The associated heat-exchanger data plate identifies manufacture for Tetra Pak and service by Tetra Pak, with a 2012 year shown on the plate.Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and coolin... Ljdpsz Ecmxofx Abysag

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included Laedpewt A Eisfx Abyeg • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Lasdpfx Asx An Urobyeg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 820 mm, total width: 1,010 mm, total height: 2,030 mm, For sale is a bandsaw from C.E. Reich. Type: Industrie 500 Year of manufacture: 2018 Saw band dimensions: 3800 mm x 16 mm Lsdpjz Aibtofx Abyoag Band speed: 30 m/sec. The Reich Industrie 500 bandsaw is a bandsaw with a fixed, welded table, portion stop, material pusher, and sliding table, suitable for cutting food products such as meat, bones, sausage, cheese, or fish. The food products can be processed fresh or frozen.